 01 May 2023, Ben Smith, Bug Report, python issue with mathplot lib vs odb query
|
Looks like a localisation issue. Your floats are formatted as "6,6584e+01", whereas the JSON decoder expects "6.6584e+01".
Can you run the following few lines please? Then I'll be able to write a test using the same setup as you:
|
|
01 May 2023, Ben Smith, Bug Report, python issue with mathplot lib vs odb query
|
> Looks like a localisation issue. Your floats are formatted as "6,6584e+01", whereas the JSON decoder expects "6.6584e+01".
This should be fixed in the latest commit to the midas develop branch. The JSON specification requires a dot for the decimal separator, so we must ignore |
|
01 May 2023, Giovanni Mazzitelli, Bug Report, python issue with mathplot lib vs odb query
|
> > Looks like a localisation issue. Your floats are formatted as "6,6584e+01", whereas the JSON decoder expects "6.6584e+01".
>
> This should be fixed in the latest commit to the midas develop branch. The JSON specification requires a dot for the decimal separator, so we must ignore |
 16 May 2023, Konstantin Olchanski, Bug Report, excessive logging of http requests
|
Our default configuration of apache httpd logs every request. MIDAS custom web pages can easily make a huge number of RPC calls creating a
huge log file and filling system disk to 100% capacity
|
|
16 May 2023, Konstantin Olchanski, Bug Report, excessive logging of http requests
|
> Our default configuration of apache httpd logs every request. MIDAS custom web pages can easily make a huge number of RPC calls creating a
> huge log file and filling system disk to 100% capacity
|
|
16 May 2023, Stefan Ritt, Bug Report, excessive logging of http requests
|
Maybe you remember the problems we had with a custom page in Japan loading it from TRIUMF. It took almost one minute since each RPC request took
about 1s round-trip. This got fixed by the modb* scheme where the framework actually collects all ODB variables in a custom page and puts them
into ONE rpc request (making the path an actual array of paths). That reduced the requests from 100 to 1 in the above example. Maybe the same
|
|
23 May 2023, Kou Oishi, Bug Report, Event builder fails at every 10 runs
|
Dear MIDAS experts,
Greetings!
|
|
31 May 2023, Ben Smith, Bug Report, Event builder fails at every 10 runs
|
> The event builder fails to initiate the 10th run since its startup,
> 'BM_NO_MEMORY: too many requests,'
|
|
02 Jun 2023, Kou Oishi, Bug Report, Event builder fails at every 10 runs
|
Dear
> > The event builder fails to initiate the 10th run since its startup,
|
|
02 Jun 2023, Kou Oishi, Bug Report, Event builder fails at every 10 runs
|
Dear Ben,
Hello. Thank you for your attention to this problem!
|
|
21 Jun 2023, Gennaro Tortone, Bug Report, mserver and script execution
|
Hi,
I have the following setup:
|
|
23 Jun 2023, Gennaro Tortone, Bug Report, deferred stop transition
|
Hi,
I'm facing some issues with 'stop' deferred transition and I suspect of
|
|
23 Jun 2023, Stefan Ritt, Bug Report, deferred stop transition
|
Deferred transitions were only implemented with a single instance of a program deferring the
transition. To have several instances, MIDAS probably needs to be extended. Certainly this
was never tested, so it's not a surprise that we get a segmentation fault.
|
|
23 Jun 2023, Gennaro Tortone, Bug Report, deferred stop transition
|
Hi Stefan,
so if I have two different frontends (feov1725 and feodt5751) connected on the same 'mserver'
|
|
23 Jun 2023, Stefan Ritt, Bug Report, deferred stop transition
|
> I'm in the same situation ?
Yepp. |
|
26 Jun 2023, Gennaro Tortone, Bug Report, deferred stop transition
|
> Deferred transitions were only implemented with a single instance of a program deferring the
> transition. To have several instances, MIDAS probably needs to be extended. Certainly this
> was never tested, so it's not a surprise that we get a segmentation fault.
|
|
26 Jun 2023, Stefan Ritt, Bug Report, deferred stop transition
|
> so, it seems that the issue is not related to different 'instances' of same frontend but
> that *at most* one frontend on whole MIDAS server can handle deferred transitions...
>
|
|
26 Jun 2023, Stefan Ritt, Bug Report, mserver and script execution
|
Indeed that could well be (and is certainly not intended like that). I checked the code
and found that "execute on start run" and "execute on stop run" are called inside
cm_transition(). That means they are executed on the computer which calls cm_transition().
|
|
27 Jun 2023, Gennaro Tortone, Bug Report, mserver and script execution
|
Hi Stefan,
> Indeed that could well be (and is certainly not intended like that). I checked the code
|
|
27 Jun 2023, Stefan Ritt, Bug Report, mserver and script execution
|
> btw I did some tests and I understand that this issue is related to 'deferred transition'
> on frontend. Indeed I disabled deferred transition on frontend side and now script
> execution is carried out always on MIDAS server;
|