10 Aug 2020, Stefan Ritt, Bug Report, data missing in runXXXXXX.mid
|
> Dear all
>
> We just started our beam time at ILL and just found yesterday that for certain
|
10 Aug 2020, Stefan Ritt, Bug Report, data missing in runXXXXXX.mid
|
> Both set to -1. We only have one logging channel. If we run a sequence with a few runs and the
> same settings, sometimes data is in the .mid file and sometimes it is not.
|
10 Aug 2020, Stefan Ritt, Bug Report, data missing in runXXXXXX.mid
|
> So I did a quick check. The file size is about the same (322K and 329K). When I dump the .mid I don't see
> the banks. It only prints two lines with "------ Event# 0 ------" and "------ Event# 1 ------" whereas for
> the file with data I get the two banks with all the data. Our online analyzer also fails to see the banks.
|
10 Aug 2020, Stefan Ritt, Bug Report, data missing in runXXXXXX.mid
|
Have you tried longer files? Maybe a few 100 MB or so. Maybe a buffer is not flushed correctly at the end of a run. |
10 Aug 2020, Stefan Ritt, Bug Report, data missing in runXXXXXX.mid
|
I have to reproduce the problem to fix it. Why don't you go and modify midas/examples/experiment/frontend.cxx in such a way that
it creates exactly the banks you have, just with random data. If you see the same problem, send me your frontend file so that I
can reproduce it. |
13 Aug 2020, Stefan Ritt, Suggestion, adding db_get_mode ti check access mode for keys
|
> Hello,
>
> I am wondering if there is a function that checks the access mode for a key? I
|
24 Aug 2020, Stefan Ritt, Forum, time information
|
> 1. Is it possible to get "Running time" using, for example, jsonrpc? (please see
> the attached file)
|
20 Oct 2020, Stefan Ritt, Info, About remote control of front end part of MIDAS on chip
|
We also use a Zynq chip and boot in the following order:
1. SD Card
|
17 Nov 2020, Stefan Ritt, Info, Equipment "common" settings in ODB
|
Today I addressed a topic which bugged me since long time. The ODB contains
settings under /Equipment/<name>/Common which are a "mirror" of the equipment[]
setting in a frontend (using the mfe.cxx framework). If the "Common" entry in
|
19 Nov 2020, Stefan Ritt, Forum, History plot consuming too much memory
|
The history code is right now programmes in such a way that when you request
an old time window, then all data from that window until the present date
gets loaded. When we implemented that, this worked fine for data ranges of
|
20 Nov 2020, Stefan Ritt, Forum, History plot consuming too much memory
|
> Taking this down a tangent, I have a mild concern that a user could temporarily
> flood our gigabit network if we do have faster disks to read the history data. Have
> there been any plans or thoughts on limiting the bandwidth users can pull from
|
27 Nov 2020, Stefan Ritt, Info, Equipment "common" settings in ODB
|
Ok, so what about the following proposal:
- I change back the mfe.cxx code to behave like before (ODB has precedence and does not get overwritten when the
|
30 Nov 2020, Stefan Ritt, Info, Equipment "common" settings in ODB
|
Ok, I implemented it the following way:
- Added a boolean flag "equipment_common_overwrite", which must be contained in EACH frontend, preferably just
|
30 Nov 2020, Stefan Ritt, Suggestion, ODBSET wildcards with array keys in Sequencer files
|
Hi Konstantin,
we are considering to make the range selection uniform among json, sequencer and
|
30 Nov 2020, Stefan Ritt, Info, Equipment "common" settings in ODB
|
One more change:
After using the new code for some hours, we realized that the "enabled" flag should not come from the frontend code,
|
01 Dec 2020, Stefan Ritt, Forum, subrun
|
There is no "mechanism" foreseen to be executed after each subrun. But you could
run a shell script after each run which loops over all subruns and converts them
one after the other.
|
09 Dec 2020, Stefan Ritt, Forum, history and variables confusion
|
First, the writing of banks is completely independent of the history system. Banks go to the log file only,
while the history is only linked to the "Variables" section in the ODB.
|
16 Dec 2020, Stefan Ritt, Forum, Issues building banks.
|
> This is very hard to do using the mfe.c frontend. (the main reason I wrote the TMFE C++ frontend class).
Actually that's not true. Just look at
|
18 Dec 2020, Stefan Ritt, Suggestion, Code formatting
|
May I ask for your quick opinion on code formatting. MIDAS had a coding style
which pretty much followed the ROOT coding style described at
|
04 Jan 2021, Stefan Ritt, Suggestion, Code formatting
|
After pondering over the holidays, I decided to use the widely used LLVM code formatting,
just adapted slightly for 3 spaces and "case" indentation in a "switch" statement. This
formatting is now very close to our original one. Nevertheless, I did not reformat all
|