> git pull
> git submodule update

confirmed. just run into this myself. I think "make" should warn about out of 
date git modules. Also check that the build git version is tagged with "-dirty".

K.O.

MidasWiki was updated to current mediawiki LTS 1.39.6 supported until Nov 2025, 
see https://www.mediawiki.org/wiki/Version_lifecycle

as downside, after this update, I see large amounts of "account request" spam, 
something that did not exist before. I suspect new mediawiki phones home to 
subscribe itself to some "please spam me" list.

if you want a user account on MidasWiki, please email me or Stefan directly, we 
will make it happen.

K.O.

Custom plots including scatter, histogram and color map plots have been 
implemented. This lets you plot graphs of X/Y data or histogram data stored in the 
ODB on a custom page. For some examples and documentation please go to

https://daq00.triumf.ca/MidasWiki/index.php/Custom_plots_with_mplot

Enjoy!
Stefan

> Also, I think that having a sine wave displayed by midas/examples/slowcont/scfe.cxx 
> would make this example even more helpful.

Indeed. I reworked the example to have a out-of-the-box sine wave plotter, including the
automatic creation of a history panel. Thanks for the hint.

Best,
Stefan

Hi Sfefan, thanks a lot for taking time to reproduce the issue! 

Here comes the resolution, and of course, it was something deeply trivial :  

the definition of the HV equipment in midas/examples/slowcont/scfe.cxx has 
the history logging time in seconds, however the comment suggests milliseconds (see below), 
and for a few days I believed to the comment (:smile:)

Easy to fix. 

Also, I think that having a sine wave displayed by midas/examples/slowcont/scfe.cxx 
would make this example even more helpful.

-- thanks again, regards, Pasha

--------------------------------------------------------------------------------------------------------
EQUIPMENT equipment[] = {

   {"HV",                       /* equipment name */
    {3, 0,                      /* event ID, trigger mask */
     "SYSTEM",                  /* event buffer */
     EQ_SLOW,                   /* equipment type */
     0,                         /* event source */
     "FIXED",                   /* format */
     TRUE,                      /* enabled */
     RO_RUNNING | RO_TRANSITIONS,        /* read when running and on transitions */
     60000,                     /* read every 60 sec */
     0,                         /* stop run after this event limit */
     0,                         /* number of sub events */
     10000,                     /* log history at most every ten seconds */ // <------------ this is 10^4 seconds, not 10 seconds
     "", "", ""} ,
    cd_hv_read,                 /* readout routine */
    cd_hv,                      /* class driver main routine */
    hv_driver,                  /* device driver list */
    NULL,                       /* init string */
    },


https://bitbucket.org/tmidas/midas/src/7f0147eb7bc7395f262b3ae90dd0d2af0625af39/examples/slowcont/scfe.cxx#lines-81

Hello,

Since commit bc227a8a34def271a598c0200ca30d73223c3373 I've been getting the compilation error below (on a Raspberry Pi 3 Model B Plus Rev 1.3).

The fix is obvious from the reported error, but I am wondering whether this should be fixed in the main git??

Thanks,

Zaher

> > 3) Make /Sequencer/State/Path relative to <exp>/userfiles. Like if /Sequencer/State/Path=test would then result to a final directory <exp>/userfiles/sequencer/test
> > 
> > I'm kind of tempted to go with 3), since this allows the experiment to define different subdirectories under <exp>/userfiles/sequencer/... depending on the situation of the experiment.
> > 
> > Best,
> > Stefan
> 
> For me the option 3) seems the most coherent one.
> Andreas

Ok, I implemented option 3) above. This means everybody using the midas sequencer has to change /Sequencer/State/Path to an empty string and move the 
sequencer files under <exp>/userfiles/sequencer as a starting point. I tested most thing, including the INCLUDE statements, but there could still be
a bug here or there, so please give it a try and report any issue to me.

Best,
Stefan

First of all it's important to understand that the slow control system has nothing to do
with events. So if you look at event statistics, these are the events with the slow control
data sent to the midas data file, not the history database. So the logging period (the one you 
decreased from 60s to 10s to 6s) only affect the generation of events. 

What is important in your case is the number of events sent to the ODB. You see these in the
screen output of the slow control frontend (see attachment). This number show increase every
second.

I tried your modification (change nulldev with a sine function), and left the sc_fe.cxx
otherwise untouched. I then started with a fresh ODB ("rm /"). Started logger, mhttpd, sc_fe
and started a run. In the attachments is what I see. So I don't understand what your problem
is.

Dear MIDAS developers,

I'm trying to understand handling of the history (slow control) variables in MIDAS,
and it seems that the behavior I'm observing is somewhat counterintuitive. 
Most likely, I just do not understand the implemented logic.

As it it rather difficult to report on the behavior of the interactive program,
I'll describe what I'm doing and illustrate the report with the series of attached 
screenshots showing the history plots and the status of the run control at different 
consecutive points in time.

Starting with the landscape:

- I'm running MIDAS, git commit=30a03c4c (the latest, as of today).

- I have built the midas/examples/slowcont frontend with the following modifications.
  (the diffs are enclosed below):
  
  1) the frequency of the history updates is increased from 60sec/10sec to 6sec/1sec
     and, in hope to have updates continuos, I replaced (RO_RUNNING | RO_TRANSITIONS)
     with RO_ALWAYS.

  2) for convenience of debugging, midas/drivers/nulldrv.cxx is replaced with its clone,
     which instead of returning zeroes in each channel, generates a sine curve:

                  V(t) = 100*sin(t/60)+10*channel

- an active channel in /Logger/History is chosen to be FILE

- /History/LoggerHistoryChannel is also set to FILE 

- I'm running mlogger and modified, as described, 'scfe' frontend from midas/examples/slowcont

- the attached history plots include three (0,4 and 7) HV:MEASURED channels


Now, the observations:

1) the history plots are updated only when a new run starts, no matter how hard
   I'm trying to update them by clicking on various buttons.

   The attached screenshots show the timing sequence of the run control states
   (with the times printed) and the corresponding history plots. 

   The "measured voltages" change only when the next run starts - the voltage graphs 
   break only at the times corresponding to the vertical green lines.

2) No matter for how long I wait within the run, the history updates are not happening.

3) if the time difference between the two run starts gets too large,
   the plotted time dependence starts getting discontinuities

4) finally, if I switch the logging channel from FILE to MIDAS (activate the MIDAS
   channel in /Logger/History and set /History/LoggerHistoryChannel to MIDAS),
   the updates of the history plots simply stop.

MIDAS feels as a great DAQ framework, so I would appreciate any suggestion on 
what I could be doing wrong. I'd also be happy to give a demo in real time 
(via ZOOM/SKYPE etc).

-- much appreciate your time, thanks, regards, Pasha
    
------------------------------------------------------------------------------
diff --git a/examples/slowcont/scfe.cxx b/examples/slowcont/scfe.cxx
index 11f09042..c98d37e8 100644
--- a/examples/slowcont/scfe.cxx
+++ b/examples/slowcont/scfe.cxx
@@ -24,9 +24,10 @@
 #include "mfe.h"
 #include "class/hv.h"
 #include "class/multi.h"
-#include "device/nulldev.h"
 #include "bus/null.h"
 
+#include "nulldev.h"
+
 /*-- Globals -------------------------------------------------------*/
 
 /* The frontend name (client name) as seen by other MIDAS clients   */
@@ -74,11 +75,11 @@ EQUIPMENT equipment[] = {
      0,                         /* event source */
      "FIXED",                   /* format */
      TRUE,                      /* enabled */
-     RO_RUNNING | RO_TRANSITIONS,        /* read when running and on transitions */
-     60000,                     /* read every 60 sec */
+     RO_ALWAYS,        /* read when running and on transitions */
+     6000,                     /* read every 6 sec */
      0,                         /* stop run after this event limit */
      0,                         /* number of sub events */
-     10000,                     /* log history at most every ten seconds */
+     1000,                     /* log history at most every one second */
      "", "", ""} ,
     cd_hv_read,                 /* readout routine */
     cd_hv,                      /* class driver main routine */
@@ -93,8 +94,8 @@ EQUIPMENT equipment[] = {
      0,                         /* event source */
      "FIXED",                   /* format */
      TRUE,                      /* enabled */
-     RO_RUNNING | RO_TRANSITIONS,        /* read when running and on transitions */
-     60000,                     /* read every 60 sec */
+     RO_ALWAYS,        /* read when running and on transitions */
+     6000,                     /* read every 6 sec */
      0,                         /* stop run after this event limit */
      0,                         /* number of sub events */
      1,                         /* log history every event as often as it changes (max 1 Hz) */
------------------------------------------------------------------------------
[test_001]$ diff ../midas/examples/slowcont/nulldev.cxx ../midas/drivers/device/nulldev.cxx 
13d12
< #include <math.h>
150,154c149,150
<    if (channel < info->num_channels) {
<      // *pvalue = info->array[channel];
<      time_t t = time(NULL);;
<      *pvalue = 100*sin(M_PI*t/60)+10*channel;
<    }
---
>    if (channel < info->num_channels)
>       *pvalue = info->array[channel];
------------------------------------------------------------------------------

> > If I understand the msequencer code correctly:
> > Under '/Sequencer/State/Path' the path can be defined from where the msequencer gets the files, generates the xml, etc.
> > However, the new javascript code reads/writes the files to '<exp>/userfiles/sequencer/'
> > 
> > If the path in the ODB is different to '<exp>/userfiles/sequencer/', it leads to quite some unexpected behavior. If '<exp>/userfiles/sequencer/' is the place where things should go, the ODB entry of the msequencer and the internal handling should probably adopted, no?
> 
> Indeed there is a change in philosophy. Previously, /Sequencer/State/Path could point anywhere in the file system. This was considered a security problem, since one could access system files under /etc for example via the midas interface. When the new file API was 
> introduced recently, it has therefor been decided that all files accessible remotely should reside under <exp>/userfiles. If an experiment needs some files outside of that directory, the experiment could define some symbolic link, but that's then in the responsibility of 
> the experiment. 
> 
> To resolve now the issue between the sequencer path and the userfiles, we have different options, and I would like to get some feedback from the community, since *all experiments* have to do that change.
> 
> 1) Leave thins as they are, but explain that everybody should modify /Sequencer/Stat/Path to some subdirectory of <exp>/userfiles/sequencer
> 
> 2) Drop /Sequencer/State/Path completely and "hard-wire" it to <exp>/usefiles/sequencer
> 
> 3) Make /Sequencer/State/Path relative to <exp>/userfiles. Like if /Sequencer/State/Path=test would then result to a final directory <exp>/userfiles/sequencer/test
> 
> I'm kind of tempted to go with 3), since this allows the experiment to define different subdirectories under <exp>/userfiles/sequencer/... depending on the situation of the experiment.
> 
> Best,
> Stefan

For me the option 3) seems the most coherent one.
Andreas

> to plot time dependencies of the monitored detector parameters, say, voltages or temperatures,
> one needs to convert the coresponging ADC readings into floats.
> 
> One could think of two ways of doing that: 
> 
> - one can perform the ADC-->T or ADC-->V conversion in the MIDAS frontend, 
>   store their [float] values in the data bank, and plot precalculated parameters vs time
> 
> - one can also store in the data bank the ADC readings which typically are short's 
>   and convert them into floats (V's or T's) at the plotting time 
> 
> The first approach doubles the storage space requirements, and I couldn't find the place where 
> one would do the conversion, if stored were the 16-bit ADC readings.
> 
> I'm sure this issue has been thought about, so what is the "recommended MIDAS way" of performing 
> the ADC -> monitored_number conversion when making MIDAS history plots ?

Most experiment go with the second method. The front-end program converts all ADC reading into physicsl 
units, i.e. not only Volt, but even Degrees Centigrade or Tesla or whatever. The slow control part of 
midas then puts these number into /Equipment/<name>/Variables as "float", and the history system picks 
them up from there. This way your history is shown in physical units and not ADC count. Actually the 
recommended slow control framework (check the examples direcotory) does not rely on data banks, but 
puts values directly into the ODB. This is typically done faster, like once per second if a value 
changes, rather than slow control events which are generated maybe once per 10 seconds or once per 
minute. Usually the slow control values are only few compared with trigger data, so a factor of two 
there does not really matter. In the MEG experiment, we have like 400 GB of slow control data per year, 
but 400 TB of trigger data per year.

Best,
Stefan

> If I understand the msequencer code correctly:
> Under '/Sequencer/State/Path' the path can be defined from where the msequencer gets the files, generates the xml, etc.
> However, the new javascript code reads/writes the files to '<exp>/userfiles/sequencer/'
> 
> If the path in the ODB is different to '<exp>/userfiles/sequencer/', it leads to quite some unexpected behavior. If '<exp>/userfiles/sequencer/' is the place where things should go, the ODB entry of the msequencer and the internal handling should probably adopted, no?

Indeed there is a change in philosophy. Previously, /Sequencer/State/Path could point anywhere in the file system. This was considered a security problem, since one could access system files under /etc for example via the midas interface. When the new file API was 
introduced recently, it has therefor been decided that all files accessible remotely should reside under <exp>/userfiles. If an experiment needs some files outside of that directory, the experiment could define some symbolic link, but that's then in the responsibility of 
the experiment. 

To resolve now the issue between the sequencer path and the userfiles, we have different options, and I would like to get some feedback from the community, since *all experiments* have to do that change.

1) Leave thins as they are, but explain that everybody should modify /Sequencer/Stat/Path to some subdirectory of <exp>/userfiles/sequencer

2) Drop /Sequencer/State/Path completely and "hard-wire" it to <exp>/usefiles/sequencer

3) Make /Sequencer/State/Path relative to <exp>/userfiles. Like if /Sequencer/State/Path=test would then result to a final directory <exp>/userfiles/sequencer/test

I'm kind of tempted to go with 3), since this allows the experiment to define different subdirectories under <exp>/userfiles/sequencer/... depending on the situation of the experiment.

Best,
Stefan

Hi Stefan and Zaher,

there is a problem with the new sequencer interface for midas.

If I understand the msequencer code correctly:
Under '/Sequencer/State/Path' the path can be defined from where the msequencer gets the files, generates the xml, etc.
However, the new javascript code reads/writes the files to '<exp>/userfiles/sequencer/'

If the path in the ODB is different to '<exp>/userfiles/sequencer/', it leads to quite some unexpected behavior. If '<exp>/userfiles/sequencer/' is the place where things should go, the ODB entry of the msequencer and the internal handling should probably adopted, no?

Andreas

> Dear beloved MIDAS users,
> 
> I'm happy to announce a "holiday update" for MIDAS. In countless hours, Zaher from 
> PSI worked hard to introduce syntax highlighting in the midas script editor. In 
> addition, there are additional features like a cleaner user interface, the option 
> to see all variables also in non-debug mode and more. Have a look at the picture 
> below, doesn't it beginning to look a lot like Christmas?
> 
> We have tested this quite a bit and went through many iterations, but no guarantee 
> that it's flawless. So please report any issue here.
> 
> I wish you all a happy holiday season,
> Stefan

to plot time dependencies of the monitored detector parameters, say, voltages or temperatures,
one needs to convert the coresponging ADC readings into floats.

One could think of two ways of doing that: 

- one can perform the ADC-->T or ADC-->V conversion in the MIDAS frontend, 
  store their [float] values in the data bank, and plot precalculated parameters vs time

- one can also store in the data bank the ADC readings which typically are short's 
  and convert them into floats (V's or T's) at the plotting time 

The first approach doubles the storage space requirements, and I couldn't find the place where 
one would do the conversion, if stored were the 16-bit ADC readings.

I'm sure this issue has been thought about, so what is the "recommended MIDAS way" of performing 
the ADC -> monitored_number conversion when making MIDAS history plots ?

-- many thanks, regards, Pasha

[Dear All, I apologize in advance for spamming.]

1) I tried to login into the forum from the lab computer and realized 
   that I forgot my password
2) I tried to reset the password and found that when registering 
   I mistyped my email address, having typed '.giv' instead of '.gov'
   in the domain name, so the recovery email went into nowhere 

(still have one session open on the laptop so can post this question)

- how do I get my email address fixed so I'd be able to reset the password?

-- many thanks, Pasha

Dear beloved MIDAS users,

I'm happy to announce a "holiday update" for MIDAS. In countless hours, Zaher from 
PSI worked hard to introduce syntax highlighting in the midas script editor. In 
addition, there are additional features like a cleaner user interface, the option 
to see all variables also in non-debug mode and more. Have a look at the picture 
below, doesn't it beginning to look a lot like Christmas?

We have tested this quite a bit and went through many iterations, but no guarantee 
that it's flawless. So please report any issue here.

I wish you all a happy holiday season,
Stefan

>    [that was not obvious from the documentation on MIDAS wiki, and adding a couple of clarifying 
>     sentences there would go long ways]

I added a sentence there. Please have a look. If you like more info, please write it yourself and send it to me. 
It's always better if that comes from users than from me.

 
> 2. if a script produces an ascii file with a known name, for example, 'a.odb', with the following two lines:

Use $SCRIPT_RESULT as described before.

Best,
Stefan

> - how does one communicate with an external shell script from MSL ? I looked at the MIDAS Sequencer page 
>   
>   https://daq00.triumf.ca/MidasWiki/index.php/Sequencer
> 
>   and didn't find an immediately obvious candidate among the MSL commands. 
>   The closest seems to be 
> 
>   'SCRIPT script [, a, b, c, ...]' 
> 
>   but I couldn't easily figure how to propagate the output of the script back to MIDAS. 
>   Let say, the script creates an ASCII file with the next run number. What is the easiest 
>   way to import the run number into ODB? - Should an external script spawn a [short-lived] 
>   MIDAS client ?  - That would work, but I'm almost sure there is a more straightforward solution. 

The output of the SCRTIP command is stored in the variable $SCRIPT_RESULT. Please pull midas to get this
new functionality.

Stefan

> - how does one communicate with an external shell script from MSL ? 

trying to answer my own question, as I didn't find a clear answer in the forum archive :

1. one could have a MSL script with a 'SCRIPT ./myscript.sh' command in it - 
   that would run a shell script named 'myscript.sh'
   [that was not obvious from the documentation on MIDAS wiki, and adding a couple of clarifying 
    sentences there would go long ways]

2. if a script produces an ascii file with a known name, for example, 'a.odb', with the following two lines:

--------------------------------------- a.odb
[/Runinfo]
Run number  = INT32 : 105
--------------------------------------- end a.odb

one can use the 'odbload' MSL command :

odbload a.odb

and get the run number set to 105. It works, but I'm curious if that is the right (envisaged) 
way of interacting with the shell scripts, or one could do better than that.

-- thanks, regards, Pasha