Hi,
 I am really puzzled: I am running the very same as far as sources
are concerned (Dec 12, 2003 snapsot) midas frontend (miniexp + camacnul)
on two different machines (and the same trusted private network):

1) one is an ancient Pentium/100 MHz laptop with RedHat Linux 7.3 and 
2) another one is event more ancient MVME167 25MHz running VxWorks 5.4.2

The front end on my Linux PC works just fine, whereas on the MVME167
I get intermittent crashes (most often at the end of the run).
[Correction: the crashes happen, I think, when the frontend wants 
to update the ODB]

The crashes happen in db_set_record routines

Any ideas what might be wrong? 
Except that MVME167 is a piece of ...#@!% 

Piotr

> Is the midas CVS server set-up so that I can pull the newest 
> version off the CVS server?
> 
> What would be my CVSROOT?
> pserver:anoncvs@midas.psi.ch:/cvs/midas *this did not work* :)

I use:

setenv CVS_RSH ssh
cvs -d cvs@midas.psi.ch:/usr/local/cvsroot checkout midas

It works most of the time. Sometimes I get locking and "permission denied"
errors on some subdirectories, presumably when CVS is being reorganized or
when there are stale locks. Does not happen too often.

K.O.

> ld: unknown flag: -rpath
> gmake: *** [darwin/bin/mlogger] Error 1

Fixed. Good catch.

> What does '-rpath' mean?

You will have to read the "ld" manual. In the nutshell, it tells the executable where to look for shared libraries. 
Aparently it is not supported by Mac OS X.

K.O.

I cannot checkout from the cvs server. So I download each latest file from the WWW
interface of CVS. While compiling these files, I encountered the following problems:
-------------
...
g++ -DHAVE_ROOT -c -g -O2 -Wall -Iinclude -Idrivers -Ldarwin/lib -DINCLUDE_FTPLIB  
-DOS_LINUX -DOS_DARWIN -DHAVE_STRLCPY -fPIC -Wno-unused-function -D_REENTRANT
-I/sw/include -I/opt/root/current/include -Wl,-rpath,/opt/root/current/lib -o
darwin/lib/rmana.o src/mana.c
g++: -rpath: linker input file unused because linking not done
g++: /opt/root/current/lib: linker input file unused because linking not done
...
g++ -g -O2 -Wall -Iinclude -Idrivers -Ldarwin/lib -DINCLUDE_FTPLIB   -DOS_LINUX
-DOS_DARWIN -DHAVE_STRLCPY -fPIC -Wno-unused-function -DHAVE_ROOT -D_REENTRANT
-I/sw/include -I/opt/root/current/include -Wl,-rpath,/opt/root/current/lib -o
darwin/bin/mlogger src/mlogger.c darwin/lib/libmidas.a -L/opt/root/current/lib -u
_G__cpp_setupG__Hist -u _G__cpp_setupG__Graf1 -u _G__cpp_setupG__G3D -u
_G__cpp_setupG__GPad -u _G__cpp_setupG__Tree -u _G__cpp_setupG__Rint -u
_G__cpp_setupG__PostScript -u _G__cpp_setupG__Matrix -u _G__cpp_setupG__Quadp -u
_G__cpp_setupG__Physics -lCore -lCint -lHist -lGraf -lGraf3d -lGpad -lTree -lRint
-lPostscript -lMatrix -lQuadp -lPhysics -lpthread -lm -L/sw/lib -ldl -lpthread
ld: unknown flag: -rpath
gmake: *** [darwin/bin/mlogger] Error 1
---------------
What does '-rpath' mean? It is just a linking error. Thanks.

> 
> Should work fine, just tried from outside PSI. Please check again.

Unfortunately, I still encounter the same problem. 
---
pc2075.psi.ch: Operation timed out
cvs [checkout aborted]: end of file from server (consult above messages if any)
---

I am in LNS-INFN (Italy), i.e., I am outside PSI. So ... what's the problem? I try to
ping the host, and it is reachable:
--------
[exaos@exaos cvsnew]$ ping midas.psi.ch
PING pc2075.psi.ch (129.129.228.23): 56 data bytes
64 bytes from 129.129.228.23: icmp_seq=0 ttl=50 time=67.237 ms
64 bytes from 129.129.228.23: icmp_seq=1 ttl=50 time=64.202 ms
64 bytes from 129.129.228.23: icmp_seq=2 ttl=50 time=56.278 ms
...
--------
Is it the problem of firewall? I am not sure. So strange.

> 
> The tar package is only done for a new release (which will happen in the next days
> BTW), so http://midas.psi.ch/download/tar/ contains the most recent packages. Upon
> request I make a midas-snapshot.tar.gz, but since there will be a 1.9.4 soon, it's
> maybe not necessary right now.

Waiting for the new release ...

> Thanks a lot. But I cannot checkout module:
> ------------
> 01:52:16: pc2075.psi.ch: Operation timed out
> 01:52:16: cvs [checkout aborted]: end of file from server (consult above
> messages if any)
> ------------

Should work fine, just tried from outside PSI. Please check again.

> Could anybody add download tar package in the WWW interface of CVS repository.
> I know the original CGI script has such a feature. Thanks.

The tar package is only done for a new release (which will happen in the next days
BTW), so http://midas.psi.ch/download/tar/ contains the most recent packages. Upon
request I make a midas-snapshot.tar.gz, but since there will be a 1.9.4 soon, it's
maybe not necessary right now.

> The current (cvs) version of MIDAS should build on Mac OS X right out of the
> box- I fixed all the problems you report back in February(?)- see the macosx
> thread in this forum. A few weeks ago I verified that it still compiles on Mac
> OS 10.3.4. The Mac OS port received minimal testing- I checked that "odbedit"
> and "mhttpd" run, that's about it. K.O.
> 

Thanks a lot. But I cannot checkout module:
------------
01:52:16: pc2075.psi.ch: Operation timed out
01:52:16: cvs [checkout aborted]: end of file from server (consult above
messages if any)
------------

Could anybody add download tar package in the WWW interface of CVS repository.
I know the original CGI script has such a feature. Thanks.

P.S.
I use these commands to checkout:
   cvs -e ssh -d :ext:cvs@midas.psi.ch:/usr/local/cvsroot checkout midas
   cvs -e ssh -d :ext:cvs@midas.psi.ch:/usr/local/cvsroot update

> In the Midas doc under "Quick Start"
> http://midas.triumf.ca/doc/html/quickstart.html
> you will find the proper cvs command for accessing the latest cvs Midas
> version. The public pwd is cvs. You will only be able to checkout/update the
> package.

I cannot checkout module:
------------
01:52:16: pc2075.psi.ch: Operation timed out
01:52:16: cvs [checkout aborted]: end of file from server (consult above
messages if any)
------------

Could anybody add download tar package in the WWW interface of CVS repository.
I know the original CGI script has such a feature. Thanks.

The current (cvs) version of MIDAS should build on Mac OS X right out of the
box- I fixed all the problems you report back in February(?)- see the macosx
thread in this forum. A few weeks ago I verified that it still compiles on Mac
OS 10.3.4. The Mac OS port received minimal testing- I checked that "odbedit"
and "mhttpd" run, that's about it. K.O.

> I add the following to makefile and try to treat Darwin as FreeBSD/Linux.
> But I failed.
> ============ 
> #-----------------------
> # This is for MacOS X
> #
> ifeq ($(OSTYPE), Darwin)
> CC = gcc
> OS_DIR = Darwin
> OSFLAGS = -DOS_DARWIN -DOS_LINUX
> LIBS = -lbsd -lcompat
> SPECIFIC_OS_PRG =
> endif
> ============
> 
> I got the following errors:
> =============
> gcc -c -g -O2 -Wall -Iinclude -Idrivers -LDarwin/lib -DINCLUDE_FTPLIB  
> -DOS_DARWIN -DOS_FREEBSD -o Darwin/lib/midas.o src/midas.c
> In file included from include/midasinc.h:45,
>                  from include/msystem.h:114,
>                  from src/midas.c:623:
> /usr/include/string.h:112: error: conflicting types for `strlcat'
> include/midas.h:1701: error: previous declaration of `strlcat'
> /usr/include/string.h:113: error: conflicting types for `strlcpy'
> include/midas.h:1700: error: previous declaration of `strlcpy'
> In file included from include/msystem.h:114,
>                  from src/midas.c:623:
> include/midasinc.h:161:21: sys/vfs.h: No such file or directory
> include/midasinc.h:164:17: pty.h: No such file or directory
> src/midas.c:780: error: conflicting types for `dbg_malloc'
> include/midas.h:1478: error: previous declaration of `dbg_malloc'
> src/midas.c:817: error: conflicting types for `dbg_calloc'
> include/midas.h:1479: error: previous declaration of `dbg_calloc'
> src/midas.c:858: error: conflicting types for `strlcpy'
> /usr/include/string.h:113: error: previous declaration of `strlcpy'
> src/midas.c:892: error: conflicting types for `strlcat'
> /usr/include/string.h:112: error: previous declaration of `strlcat'
> gmake: *** [Darwin/lib/midas.o] Error 1
> ==========
> 
> Could anyone give me some hints. Thanks!

I add the following to makefile and try to treat Darwin as FreeBSD/Linux.
But I failed.
============ 
#-----------------------
# This is for MacOS X
#
ifeq ($(OSTYPE), Darwin)
CC = gcc
OS_DIR = Darwin
OSFLAGS = -DOS_DARWIN -DOS_LINUX
LIBS = -lbsd -lcompat
SPECIFIC_OS_PRG =
endif
============

I got the following errors:
=============
gcc -c -g -O2 -Wall -Iinclude -Idrivers -LDarwin/lib -DINCLUDE_FTPLIB  
-DOS_DARWIN -DOS_FREEBSD -o Darwin/lib/midas.o src/midas.c
In file included from include/midasinc.h:45,
                 from include/msystem.h:114,
                 from src/midas.c:623:
/usr/include/string.h:112: error: conflicting types for `strlcat'
include/midas.h:1701: error: previous declaration of `strlcat'
/usr/include/string.h:113: error: conflicting types for `strlcpy'
include/midas.h:1700: error: previous declaration of `strlcpy'
In file included from include/msystem.h:114,
                 from src/midas.c:623:
include/midasinc.h:161:21: sys/vfs.h: No such file or directory
include/midasinc.h:164:17: pty.h: No such file or directory
src/midas.c:780: error: conflicting types for `dbg_malloc'
include/midas.h:1478: error: previous declaration of `dbg_malloc'
src/midas.c:817: error: conflicting types for `dbg_calloc'
include/midas.h:1479: error: previous declaration of `dbg_calloc'
src/midas.c:858: error: conflicting types for `strlcpy'
/usr/include/string.h:113: error: previous declaration of `strlcpy'
src/midas.c:892: error: conflicting types for `strlcat'
/usr/include/string.h:112: error: previous declaration of `strlcat'
gmake: *** [Darwin/lib/midas.o] Error 1
==========

Could anyone give me some hints. Thanks!

> Is the midas CVS server set-up so that I can pull the newest 
> version off the CVS server?
> 
> What would be my CVSROOT?
> pserver:anoncvs@midas.psi.ch:/cvs/midas *this did not work* :)
> 
> Piotr
> 
>  

In the Midas doc under "Quick Start"
http://midas.triumf.ca/doc/html/quickstart.html
you will find the proper cvs command for accessing the latest cvs Midas
version. The public pwd is cvs. You will only be able to checkout/update the
package.

Is the midas CVS server set-up so that I can pull the newest 
version off the CVS server?

What would be my CVSROOT?
pserver:anoncvs@midas.psi.ch:/cvs/midas *this did not work* :)

Piotr

 

> > When I compile current cvs-head midas, I get errors about undefined function
> > min(). I do not think min() is in the list of standard C functions, so
> > something else should be used instead, like a MIN(a,b) macro. To make life
> > more interesting, in a few places, there is also a variable called "min".
> > Here is the error:
> > 
> > src/mana.c: In function `INT write_event_ascii(FILE*, EVENT_HEADER*, 
> >    ANALYZE_REQUEST*)':
> > src/mana.c:2571: `min' undeclared (first use this function)
> > src/mana.c:2571: (Each undeclared identifier is reported only once for each 
> >    function it appears in.)
> > make: *** [linux/lib/rmana.o] Error 1
> 
> This is really a miracle to me. The min/max macros are defined both in midas.h
> and msystem.h and worked the last ten years or so. However, I agree that macros
> should follow the standard and use capital letters, so I changed that.

The problem is that /usr/include/c++/3.*/bits/stl_algobase.h contains 
#undef min
#undef max

and in C++ with STL one should really use something like this
    std::min<INT>(a,b)


Cheers
  Piotr

I commited Makefile bits to set the RPATH on dynamically linked executables
to find libmidas.so and ROOT shared libraries without setting
LD_LIBRARY_PATH , etc. K.O.

> When I compile current cvs-head midas, I get errors about undefined function
> min(). I do not think min() is in the list of standard C functions, so
> something else should be used instead, like a MIN(a,b) macro. To make life
> more interesting, in a few places, there is also a variable called "min".
> Here is the error:
> 
> src/mana.c: In function `INT write_event_ascii(FILE*, EVENT_HEADER*, 
>    ANALYZE_REQUEST*)':
> src/mana.c:2571: `min' undeclared (first use this function)
> src/mana.c:2571: (Each undeclared identifier is reported only once for each 
>    function it appears in.)
> make: *** [linux/lib/rmana.o] Error 1

This is really a miracle to me. The min/max macros are defined both in midas.h
and msystem.h and worked the last ten years or so. However, I agree that macros
should follow the standard and use capital letters, so I changed that.

When I compile current cvs-head midas, I get errors about undefined function
min(). I do not think min() is in the list of standard C functions, so
something else should be used instead, like a MIN(a,b) macro. To make life
more interesting, in a few places, there is also a variable called "min".
Here is the error:

src/mana.c: In function `INT write_event_ascii(FILE*, EVENT_HEADER*, 
   ANALYZE_REQUEST*)':
src/mana.c:2571: `min' undeclared (first use this function)
src/mana.c:2571: (Each undeclared identifier is reported only once for each 
   function it appears in.)
make: *** [linux/lib/rmana.o] Error 1

K.O.

> I am setting up a new experiment and I added a "comment" field to "/
> Experiment/Edit on start". When I start the run, I see this field, but I
> cannot enter anything: the HTML "maxlength" is zero (or 1?). I traced this
> to mhttpd.c: if (this is a string) maxlength = key.item_size. But what is
> key.item_size for a string? The current length? If so, how do I enter a
> string that is longer than the current one (zero in case I start from
> scratch). I am stumped! K.O.

Your problem is that you created a ODB string with zero length. If you do this
through ODBEdit, a default length of 32 is used:

[local:Test:S]Edit on start>cr string Comment
String length [32]:
[local:Test:S]Edit on start>ls -l
Key name                        Type    #Val  Size  Last Opn Mode Value
---------------------------------------------------------------------------
Comment                         STRING  1     32    2s   0   RWD
[local:Test:S]Edit on start>

which then results in a maxlength of 32 as well during run start. I presume
you used mhttpd itself to create the string. Trying to reporduce this, I found
that mhttpd creates strings with zero length. I will fix this soon. Until
then, use ODBEdit to create your strings.

I am setting up a new experiment and I added a "comment" field to "/
Experiment/Edit on start". When I start the run, I see this field, but I
cannot enter anything: the HTML "maxlength" is zero (or 1?). I traced this
to mhttpd.c: if (this is a string) maxlength = key.item_size. But what is
key.item_size for a string? The current length? If so, how do I enter a
string that is longer than the current one (zero in case I start from
scratch). I am stumped! K.O.

Thanks for fixing these long lasting bugs. The code is much cleaner now, please
commit it.

I am about to commit the mhttpd Elog fixes we have been using in TWIST since
about October. The infamous Elog "last N days" problem is fixed, sundry
memory overruns are caught and assert()ed.

For the curious, the "last N days" problem was caused by uninitialized data
in the elog handling code. A non-zero-terminated string was read from a file
and passed to atoi(). Here is a simplifed illustration:

char str[256]; // uninitialized, filled with whatever happens on the stack
read(file,str,6); // read 6 bytes, non-zero terminated
// str now looks like this: "123456UUUUUUUUU....", "U" is uninitialized memory
int len = atoi(str); // if the first "U" happens to be a number, we lose.

The obvious fix is to add "str[6]=0" before the atoi() call.

Attached is the CVS diff for the proposed changes. Please comment.

K.O.