 31 Jan 2023, Lukas Gerritzen, Suggestion, "Soft interlock" possible?
|
Is it possible to impose requirements on certain output variables in an interlock-like fashion? For example: "As long as the temperature exceeds a certain
threshold, a light switched by a relay cannot be turned on."
|
 31 Jan 2023, Stefan Ritt, Suggestion, "Soft interlock" possible?
|
> Is it possible to impose requirements on certain output variables in an interlock-like fashion? For example: "As long as the temperature exceeds a certain
threshold, a light switched by a relay cannot be turned on."
>
|
|
08 Feb 2023, Stefan Ritt, Suggestion, histories capture 'ruy'
|
> The histories capture key events from 'r' 'u' 'y' and 'Escape' for various functions like rescaling etc. However, this also means that if we include an
editable modbvalue and a history in the same custom page then changing the modbvalue to something that includes 'ruy' is not possible.
>
|
|
09 Feb 2023, Zaher Salman, Suggestion, histories capture 'ruy'
|
I agree with you, option 2 is better and works well.
The only problem is that if you are showing multiple histograms in the same window the keyDown even will affect all of the histories in the window.
This may be the intended behaviour, but I think that if we can find a way to have the event affecting only the intended history (focused element for example) |
|
09 Feb 2023, Stefan Ritt, Suggestion, histories capture 'ruy'
|
> I agree with you, option 2 is better and works well.
> The only problem is that if you are showing multiple histograms in the same window the keyDown even will affect all of the histories in the window.
> This may be the intended behaviour, but I think that if we can find a way to have the event affecting only the intended history (focused element for |
|
27 Apr 2023, Marius Koeppel, Suggestion, Maximum ODB size
|
Hi all,
> I agree, I think we can safely bump the limit from 100 Mbytes to 1 Gbyte, maybe 1.5 or
|
|
27 Apr 2023, Konstantin Olchanski, Suggestion, Maximum ODB size
|
> > I agree, I think we can safely bump the limit from 100 Mbytes to 1 Gbyte, maybe 1.5 or
> > 1.99 Gbytes. Above that we run into 32-bit/31-bit cleanliness problems.
>
|
|
27 Apr 2023, Marius Koeppel, Suggestion, Maximum ODB size
|
> This is change is wrong. As I wrote, ODB is not 64-bit clean and it is not 32-bit clean. We think is is 31-bit clean, so maximum size would be slightly
less than 2 Gbytes.
|
|
27 Apr 2023, Konstantin Olchanski, Suggestion, Maximum ODB size
|
> You said the writing into .odb is buggy. Do you mean it’s buggy in general or only in this specific case?
> We save the ODB most of the time in the .odb format.
|
|
27 Apr 2023, Konstantin Olchanski, Suggestion, Maximum ODB size
|
my vote is to bump the ODB size limit to 1999*1000*1000 (not quite 2GB). but this needs to be tested. especially save and restore from ODB, XML and JSON
files, including how long it takes to save and load a 1.9GB ODB. K.O. |
|
27 Apr 2023, Stefan Ritt, Suggestion, Maximum ODB size
|
> Congratulations. created != "it works".
Two other tings to consider:
|
28 Apr 2023, Marius Koeppel, Suggestion, Maximum ODB size 
|
> my vote is to bump the ODB size limit to 1999*1000*1000 (not quite 2GB). but this needs to be tested. especially save and restore from ODB, XML and JSON
files, including how long it takes to save and load a 1.9GB ODB. K.O.
|
|
28 Apr 2023, Stefan Ritt, Suggestion, Maximum ODB size
|
> Is this maybe related to what Stefan said about the run start - so that odbedit needs some time to load the bigger ODB?
At the run start mlogger writes the ODB to the .mid file. This needs conversion (binary ODB -> XML ASCII) which can take time.
|
|
28 Apr 2023, Marius Koeppel, Suggestion, Maximum ODB size
|
> At the run start mlogger writes the ODB to the .mid file. This needs conversion (binary ODB -> XML ASCII) which can take time.
> This does NOT depend on the ODB size, but on the ODB *content*. Every key in the ODB takes time to convert. So if your ODB as 1.5 GB
> but only a few keys, this is still fast. Only if you have 200 million keys int he ODB, then mlogger takes lots of time to convert
|
|
28 Apr 2023, Konstantin Olchanski, Suggestion, Maximum ODB size
|
> > Congratulations. created != "it works".
>
> Two other tings to consider:
|
|
28 Apr 2023, Konstantin Olchanski, Suggestion, Maximum ODB size
|
> > Is this maybe related to what Stefan said about the run start - so that odbedit needs some time to load the bigger ODB?
>
> At the run start mlogger writes the ODB to the .mid file. This needs conversion (binary ODB -> XML ASCII) which can take time.
|
|
10 May 2023, Lukas Gerritzen, Suggestion, Desktop notifications for messages
|
It would be nice to have MIDAS notifications pop up outside of the browser window.
To get enable this myself, I hijacked the speech synthesis and I added the following to mhttpd_speak_now(text) inside mhttpd.js:
|
|
10 May 2023, Lukas Gerritzen, Suggestion, Make sequencer more compatible with mobile devices
|
When trying to select a run script on an iPad or other mobile device, you cannot enter subdirectories. This is caused by the following part:
[CODE]
|
|
10 May 2023, Stefan Ritt, Suggestion, Make sequencer more compatible with mobile devices
|
[quote="Lukas Gerritzen"]When trying to select a run script on an iPad or other mobile device, you cannot enter subdirectories. This is caused by the following
part:
[/quote]
|
|
10 May 2023, Stefan Ritt, Suggestion, Desktop notifications for messages
|
[quote="Lukas Gerritzen"]It would be nice to have MIDAS notifications pop up outside of the browser window.[/quote]
There are certainly dozens of people who do "I don't like pop-up windows all the time". So this has to come with a switch in the config page to turn it |