> > Stephan, why did you prohibit building mana.c without ROOT and HBOOK
> > support? I think such a configuration is valid and should be allowed.
> 
> Oops, sorry, my fault. I forgto that people use mana.c without ROOT and 
> HBOOK. The reason I made the change was that people forgot the -DHVAE_HBOOK 
> in their makefile. In that case, no HBOOK init is done in mana.c and the 
> first histogram booking in the user code crashes HBOOK.

Ahem. There is only so much rope we can give out to prevent people from shooting
themselves in the foot...

> So please take the #error statement out of mana.c

Done.

> One possibility is that we put an additional layer on top of the histogram 
> boooking/filling. These macros are converted to their HBOOK or ROOT 
> equivalents depending on the HAVE_HBOOK/HAVE_ROOT. If none of both is 
> present, the histogram booking macro can produce a runtime error. This has 
> the additional advantage that users can switch from HBOOK to ROOT without 
> change of their user code.

I can't think of anything other than wrapping every HBOOK call with "if
(!hbook_is_initialized) initialize_hbook();". But then, where is PAWC
coming from anyway?!?

We could also print a warning message "This mana.c has no HBOOK support. If you
see HBOOK crashes, please relink with hmana,c". Ugly, but informative, plus it
points anybody who knows how to read towards a solution.

K.O.

Reproduced on el7 (CentOS7). Same thing works on el6 (SL6).

The error is in the SSE4.2-assembly-accelerated library for computing crc32c checksums. I do 
not understand this assembly stuff enough to tell what goes wrong.

In any case, "make linux32" is intended for VME processors that cannot run 64-bit code. These 
processors also happen to not have the SSE4.2 instructions needed for this code to actually 
work, so one solution would be to always disable crc32c SSE4.2-assembly-acceleration for the 
linux32 target.

Note that the original reported was running "make linux32" with the idea of generating code for 
the 32-bit ARM processor.

Here the situation is like this: the required CRC32C instructions are present on 64-bit capable 
ARM processors (RPi3, etc) and probably work in 32-bit mode, and I found the assembly-
language crc32c library that uses them. It needs to be added to MIDAS and tested.

For the older 32-bit-only ARM processors (Cyclone5 FPGA, Rpi2 and older) I do not see any 
hardware accelerated crc32c implementations, so it uses software computed CRC32 always. 
(P.S.: I see the current linux kernels have a hardware accelerated library for CRC32C, not sure if 
it can be imported into MIDAS easily).

K.O.


> $ make linux32 ...
> g++ -m32 -c -g -O2 -Wall -Wno-strict-aliasing -Wuninitialized -Iinclude -
> Idrivers -Imxml -Imscb/include -DHAVE_FTPLIB -D_LARGEFILE64_SOURCE -DHAVE_ZLIB -
> DHAVE_MSCB -DHAVE_MONGOOSE6 -DMG_ENABLE_THREADS -DMG_DISABLE_CGI -
DMG_ENABLE_SSL 
> -DOS_LINUX -fPIC -Wno-unused-function -o lib/crc32c.o src/crc32c.cxx
> src/crc32c.cxx: In function ‘uint32_t crc32c_hw(uint32_t, const void*, size_t)’:
> src/crc32c.cxx:283:66: error: ‘asm’ operand has impossible constraints
>                      : "r"(next), "0"(crc0), "1"(crc1), "2"(crc2));
>                                                                   ^
> src/crc32c.cxx:303:66: error: ‘asm’ operand has impossible constraints
>                      : "r"(next), "0"(crc0), "1"(crc1), "2"(crc2));
>                                                                   ^
> src/crc32c.cxx: In function ‘uint32_t crc32c(uint32_t, const void*, size_t)’:
> src/crc32c.cxx:348:34: error: PIC register clobbered by ‘%ebx’ in ‘asm’
>                  : "%ebx", "%edx"); \
>                                   ^
> src/crc32c.cxx:362:5: note: in expansion of macro ‘SSE42’
>      SSE42(sse42);
>      ^
> make[1]: *** [lib/crc32c.o] Error 1
> make[1]: Leaving directory `/home/hh19285/packages/midas'
> make: *** [linux32] Error 2
> 
> Could you please help with getting past this? otherwise we may need to change 
> our whole experimental setup.
> 
> Thank you in advance

> Reproduced on el7 (CentOS7). Same thing works on el6 (SL6).

Fixed in commit dd937e6. Only enable SSE4.2 crc32c for 64-bit compilation. Still not sure why it worked for 32-bit 
compilation on el6 (SL6).

K.O.


> 
> The error is in the SSE4.2-assembly-accelerated library for computing crc32c checksums. I do 
> not understand this assembly stuff enough to tell what goes wrong.
> 
> In any case, "make linux32" is intended for VME processors that cannot run 64-bit code. These 
> processors also happen to not have the SSE4.2 instructions needed for this code to actually 
> work, so one solution would be to always disable crc32c SSE4.2-assembly-acceleration for the 
> linux32 target.
> 
> Note that the original reported was running "make linux32" with the idea of generating code for 
> the 32-bit ARM processor.
> 
> Here the situation is like this: the required CRC32C instructions are present on 64-bit capable 
> ARM processors (RPi3, etc) and probably work in 32-bit mode, and I found the assembly-
> language crc32c library that uses them. It needs to be added to MIDAS and tested.
> 
> For the older 32-bit-only ARM processors (Cyclone5 FPGA, Rpi2 and older) I do not see any 
> hardware accelerated crc32c implementations, so it uses software computed CRC32 always. 
> (P.S.: I see the current linux kernels have a hardware accelerated library for CRC32C, not sure if 
> it can be imported into MIDAS easily).
> 
> K.O.
> 
> 
> > $ make linux32 ...
> > g++ -m32 -c -g -O2 -Wall -Wno-strict-aliasing -Wuninitialized -Iinclude -
> > Idrivers -Imxml -Imscb/include -DHAVE_FTPLIB -D_LARGEFILE64_SOURCE -DHAVE_ZLIB -
> > DHAVE_MSCB -DHAVE_MONGOOSE6 -DMG_ENABLE_THREADS -DMG_DISABLE_CGI -
> DMG_ENABLE_SSL 
> > -DOS_LINUX -fPIC -Wno-unused-function -o lib/crc32c.o src/crc32c.cxx
> > src/crc32c.cxx: In function ‘uint32_t crc32c_hw(uint32_t, const void*, size_t)’:
> > src/crc32c.cxx:283:66: error: ‘asm’ operand has impossible constraints
> >                      : "r"(next), "0"(crc0), "1"(crc1), "2"(crc2));
> >                                                                   ^
> > src/crc32c.cxx:303:66: error: ‘asm’ operand has impossible constraints
> >                      : "r"(next), "0"(crc0), "1"(crc1), "2"(crc2));
> >                                                                   ^
> > src/crc32c.cxx: In function ‘uint32_t crc32c(uint32_t, const void*, size_t)’:
> > src/crc32c.cxx:348:34: error: PIC register clobbered by ‘%ebx’ in ‘asm’
> >                  : "%ebx", "%edx"); \
> >                                   ^
> > src/crc32c.cxx:362:5: note: in expansion of macro ‘SSE42’
> >      SSE42(sse42);
> >      ^
> > make[1]: *** [lib/crc32c.o] Error 1
> > make[1]: Leaving directory `/home/hh19285/packages/midas'
> > make: *** [linux32] Error 2
> > 
> > Could you please help with getting past this? otherwise we may need to change 
> > our whole experimental setup.
> > 
> > Thank you in advance

The Makefile targets for crosscompiling MIDAS are now documented in the MIDAS
Doxygen documentation:

make linux32 & make clean32
make linux64 & make clean64
make crosscompile
make dox

This has to do with which flavour of MIDAS is built by default: 32-bit or 64-bit.

This is how this works now.

Default flavour is determined by ROOT. If ROOTSYS points to 32-bit ROOT, then
32-bit MIDAS is built, if 64-bit ROOT, then 64-bit MIDAS. This works well after
the ROOT team added the correct "-m32" and "-m64" flags to "rootconfig --cflags".

If for some reason, we also need a non-default flavour of MIDAS, for example
when the main daq computer runs 64-bit MIDAS, but one frontend has to run on a
"32-bit only" VME processor, you say "make linux32". This creates the
"linux-m32/{lib,bin}" tree that you then reference in the Makefile of your
special frontend (i.e. instead of "-L$MIDASSYS/linux/lib" say
"-L$MIDASSYS/linux-m32/lib"). "make linux64" works the same way.

These non-default flavours of MIDAS are compiled with most special features
disabled: no ROOT, no MYSQL, etc.

When building "make linux32", you may also see errors caused by missing 32-bit
libraries - many 64-bit Linux distributions do not install the full 32-bit
development environment by default - so some header files and libraries may be
reported as missing. These not-installed-by-default 32-bit packages are usually
easy to install using commands like "yum install libxxx-devel.i386".

K.O.

The capability to generate doxygen documentation of MIDAS was restored.

Use "make dox" and "make cleandox",
find generated documentation in ./html,
look at it via "firefox html/index.html".

The documentation is not generated by default - it takes quite a long time to build all the call graphs.

And the call graphs is what makes this documentation useful - without some visual graphical 
representation it is quite difficult to understand some parts of MIDAS. Both caller and callee graphs are 
generated.

Note that doxygen documentation for the javascript functions in mhttpd.js is also generated, making a 
handy reference in addition to the full documentation on the MIDAS Wiki.

K.O.

> The capability to generate doxygen documentation of MIDAS was restored.
> 
> Use "make dox" and "make cleandox",
> find generated documentation in ./html,
> look at it via "firefox html/index.html".
> 
> The documentation is not generated by default - it takes quite a long time to build all the call graphs.
> 
> And the call graphs is what makes this documentation useful - without some visual graphical 
> representation it is quite difficult to understand some parts of MIDAS. Both caller and callee graphs are 
> generated.
> 
> Note that doxygen documentation for the javascript functions in mhttpd.js is also generated, making a 
> handy reference in addition to the full documentation on the MIDAS Wiki.
> 
> K.O.

To generate the files, you need doxygen installed which not everybody has. Is there a web site where one can see the generated graphs?

/Stefan

> > The capability to generate doxygen documentation of MIDAS was restored.
> > 
> > Use "make dox" and "make cleandox",
> > find generated documentation in ./html,
> > look at it via "firefox html/index.html".
> > 
> 
> To generate the files, you need doxygen installed which not everybody has.

On most Linux systems, doxygen is easy to install. Red Hat instructions are here: 
http://www.triumf.info/wiki/DAQwiki/index.php/SLinstall#Install_packages_needed_for_QUARTUS.2C_ROOT.2C_EPICS_and_MIDAS_DAQ

On MacOS, doxygen is easy to install via macports: sudo port install doxygen

> Is there a web site where one can see the generated graphs?

http://ladd00.triumf.ca/~olchansk/midas/index.html

there is no cron job to update this, but I may update it infrequently.

K.O.

> On most Linux systems, doxygen is easy to install. Red Hat instructions are here: 
> http://www.triumf.info/wiki/DAQwiki/index.php/SLinstall#Install_packages_needed_for_QUARTUS.2C_ROOT.2C_EPICS_and_MIDAS_DAQ
> 
> On MacOS, doxygen is easy to install via macports: sudo port install doxygen
> 
> > Is there a web site where one can see the generated graphs?
> 
> http://ladd00.triumf.ca/~olchansk/midas/index.html
> 
> there is no cron job to update this, but I may update it infrequently.
> 
> K.O.

Great, thanks a lot!

-Stefan

As of svn rev 4794, midas builds, runs and should be fully usable on MacOS 10.6.4. Previous revisions did 
not compile due to assorted Linuxisms and did not run because of a sizeof() problem in ss_gettid(). Also 
one of the system header files (mtio.h?) present in MacOS 10.5 vanished from 10.6.

Please continue reporting all problems with midas on macos to this forum.
K.O.

> As of svn rev 4794, midas builds, runs and should be fully usable on MacOS 10.6.4. Previous revisions did 
> not compile due to assorted Linuxisms and did not run because of a sizeof() problem in ss_gettid(). Also 
> one of the system header files (mtio.h?) present in MacOS 10.5 vanished from 10.6.

It turns out that on MacOS 10.6 the default maximum SYSV shared memory size is about 2 Mbytes, too small even for the default MIDAS SYSTEM 
event buffer.

Svn revision 4807 implements POSIX shared memory, which does not seem to have such a small size limit and makes it the default on MacOS.

This update fixes the last issue that I am aware of for running MIDAS on MacOS.

svn rev 4807
K.O.

Hello,

I see this mhttpd error starting MSL-script: 
Uncaught (in promise) ReferenceError: m is not defined
at mhttpd_message (VM2848 mhttpd.js:2304)
at VM2848 mhttpd.js:2122

As I can see it does not affect work of MSL script but shows ReferenceError in 
Midas sequencer (see picture).

Could please point me how to fix this error?

Thanks.
Ruslan

> I see this mhttpd error starting MSL-script: 
> Uncaught (in promise) ReferenceError: m is not defined
> at mhttpd_message (VM2848 mhttpd.js:2304)
> at VM2848 mhttpd.js:2122

your line numbers do not line up with my copy of mhttpd.js. what version of midas 
do you run?

please give me the output of odbedit "ver" command (GIT revision, looks like this: 
IT revision:       Wed Feb 3 11:47:02 2021 -0800 - midas-2020-08-a-84-g78d18b1c on 
branch feature/midas-2020-12).

same info is in the midas "help" page (GIT revision).

to decipher the git revision string:

midas-2020-08-a-84-g78d18b1c means:
is commit 78d18b1c
which is 84 commits after git tag midas-2020-08-a

"on branch feature/midas-2020-12" confirms that I have the midas-2020-12 pre-
release version without having to do all the decoding above.

if you also have "-dirty" it means you changed something in the source code 
 and warranty is voided. (just joking! we can debug even modified midas source 
code)

K.O.

We had the same issue here, which comes from mhttpd.js line 2395 on the current git version. This seems to happen mostly when there is an alarm triggered or when there is an error message.

Anyway, the easiest solution for us was to define m at the beginning of mhttpd_message function 

let m;

and replace line 2395 with

if (m !== undefined) {


> > I see this mhttpd error starting MSL-script: 
> > Uncaught (in promise) ReferenceError: m is not defined
> > at mhttpd_message (VM2848 mhttpd.js:2304)
> > at VM2848 mhttpd.js:2122
> 
> your line numbers do not line up with my copy of mhttpd.js. what version of midas 
> do you run?
> 
> please give me the output of odbedit "ver" command (GIT revision, looks like this: 
> IT revision:       Wed Feb 3 11:47:02 2021 -0800 - midas-2020-08-a-84-g78d18b1c on 
> branch feature/midas-2020-12).
> 
> same info is in the midas "help" page (GIT revision).
> 
> to decipher the git revision string:
> 
> midas-2020-08-a-84-g78d18b1c means:
> is commit 78d18b1c
> which is 84 commits after git tag midas-2020-08-a
> 
> "on branch feature/midas-2020-12" confirms that I have the midas-2020-12 pre-
> release version without having to do all the decoding above.
> 
> if you also have "-dirty" it means you changed something in the source code 
>  and warranty is voided. (just joking! we can debug even modified midas source 
> code)
> 
> K.O.

Thanks for reporting and pointing to the right location.

I fixed and committed it.

Best,
Stefan

Hello,

I'm wondering if it would be possible to add the ability to lock ODB variables as 
a sequencer command.

The "Lock when running" directory in the ODB /Experiment tree seems to apply only 
during a run - I'd like a way to lock a variable outside a run.

Is this possible within the sequencer?  Or have I overlooked existing 
functionality?

Thanks!

Amy

A link to an array variable such as

[local:npet:Stopped]/>ls /rcparams/ControlVariables/
TRFC:PB5 (V) -> /Equipment/Beamline/Variables/Demand[56]
                                17835

displays the whole Demand array on the mhttpd ODB page (see attachment)
rather than just the one element Demand[56].
This behaviour also occurs with older versions of mhttpd.
 
Not sure if it's a bug or a feature, but my suggestion is that it
ought to display the one element only (as odbedit does) and not the whole array.

Suzannah  

Further to my last message, I see that a midas version from 2013 does indeed display
links to arrays as I would expect (see attachment). Therefore the problem in later
versions  is a bug rather than a feature.


> A link to an array variable such as
> 
> [local:npet:Stopped]/>ls /rcparams/ControlVariables/
> TRFC:PB5 (V) -> /Equipment/Beamline/Variables/Demand[56]
>                                 17835
> 
> displays the whole Demand array on the mhttpd ODB page (see attachment)
> rather than just the one element Demand[56].
> This behaviour also occurs with older versions of mhttpd.
>  
> Not sure if it's a bug or a feature, but my suggestion is that it
> ought to display the one element only (as odbedit does) and not the whole array.
> 
> Suzannah  

It might have worked some ~5 years ago, but it never really showed the target value of a link, just the 
link itself. I reworked the code now to show both the link and the target of the link, so you can change 
both in the mhttpd ODB page. Should be consistent now with odbedit. Have a look if it works for you.

Stefan

> It might have worked some ~5 years ago, but it never really showed the target value of a link, just the 
> link itself. I reworked the code now to show both the link and the target of the link, so you can change 
> both in the mhttpd ODB page. Should be consistent now with odbedit. Have a look if it works for you.
> 
> Stefan

Thank you. That has solved the problem.
Suzannah 

We're using the lazylogger to trigger a script that copies files, and the lag 
between a completed file appearing and the lazylogger trigger occasionally feels 
uncomfortably long.  It's not too bad - at most, around five or so minutes.  But 
of course it's tough to be patient when you're waiting to look at data.

The settings for our lazylogger specify a 'Stay behind' of zero and a 'Period' of 
zero.

Is there a way to make the lazylogger less lazy?  What determines the time 
between the appearance of a file and the lazylogger trigger?