 29 Sep 2021, Richard Longland, Bug Report, nstall clash between MIDAS 2020-08 and mscb
|
Thank you, Stefan.
I found these instructions under
|
 20 Nov 2003, Renee Poutissou, , cannot shutdown defunct clients
|
Indeed the ODB command "cleanup" really works. I have used it several
times with the TWIST DAQ and regularly with the BNMR/MUSR setups where
we have these stubborn clients (ie feepics) that do not want to shutdown
|
|
11 Mar 2004, Renee Poutissou, , Creation of secondary Midas output file.
|
Jan ,
Do you need to log this stage 1 output? If not, you would use the
|
|
02 Nov 2004, Renee Poutissou, Info, Event Builder info in mhttpd Status page
|
Information about the Event Builder statistics has been removed from the
Status page in mhttpd. I heard from Pierre that this information might
be redundant when using the new Event Builder format???
|
|
17 Dec 2008, Renee Poutissou, Bug Report, Overflow on "cm_msg" command generates segfault
|
The following error has been reported to me by T2K colleagues:
When using "odbedit -c "msg my_message", the following behavior
|
|
23 Jan 2009, Renee Poutissou, Info, Subrun scheme implemented
|
Hi Stefan,
My colleague Tobi Raufer (tobi.raufer@stfc.ac.uk) has tested this new implementation and
sent me the following questions:
|
|
14 Jan 2004, Razvan Stefan Gornea, , Access to hardware in the MIDAS framework
|
I am just starting to explore MIDAS, i.e. reading the manual and trying
some examples. For the moment I would like to make a simple frontend that
access a portable multimeter through RS-232 port. I think this could help
|
16 Jan 2004, Razvan Stefan Gornea, , Access to hardware in the MIDAS framework 
|
The multimeter device is indeed to simple to use MIDAS but I am just trying
it as a learning experience. The DAQ system to develop involves VME crates
and general purpose I/O boards. The slow control part, especially accessing
|
|
11 Jul 2006, Razvan Stefan Gornea, Forum, Tundra Universe CA91C042
|
I am not using Midas but I need some help from somebody experienced with VME access using the Tundra Universe, so I thought here I have a chance ...
I have a GE Fanuc 7700 and use the vme_universe driver (ver. 3.3). In the past I programed for a DAQ board using A24/D16. Now I have a new board using |
|
24 Jun 2009, Razvan Stefan Gornea, Forum, Frontend and manual trigger question
|
Hi,
I have a question related to the frontend and I would need some suggestions
|
|
09 Nov 2013, Razvan Stefan Gornea, Forum, Installation problem
|
Hi,
I run into problems while trying to install Midas on Slackware 14.0. In the past
|
|
14 Nov 2013, Razvan Stefan Gornea, Forum, Installation problem
|
Hi, Thanks a lot for the response! Yes to search packages and list their content in Slackware it is pretty similar to your illustration. Slackware seems
to use iODBC in which case it would link with -liodbc I guess.
root@lheppc83:~# slackpkg file-search sql.h |
|
19 May 2014, Razvan Stefan Gornea, Forum, Weird problem on new installation
|
Hello,
I have a very weird problem on a new installation of Midas running also new code. My old code was written with the CAEN VME
library and run from an older PC with a CAEN interface. I now moved to a GEFanuc V7769 with a Tundra II bridge and the frontend is using the UniverseII |
|
22 May 2014, Razvan Stefan Gornea, Forum, Weird problem on new installation
|
I reduced the parameter space a little bit and I think the problem is somewhere in the framework. What I did is first to make a short program which accesses
the ODB and I was able to access the Settings record. Everything seems to work fine, if parts or all of the record is missing then it is created automatically,
etc. |
|
27 May 2014, Razvan Stefan Gornea, Forum, Weird problem on new installation
|
I investigated further this problem and this is what I think is going on. Essentially when creating the Settings key, the framework scans all the subkeys
of the parent key to see if any are open. If that's the case it then returns an error on opening the Settings key! Here are the details:
|
|
17 May 2022, Razvan Stefan Gornea, Info, MIDAS switched to C++
|
Hi, I have three naive questions about this:
- have you posted somewhere this guide about converting C frontends to C++?
- it was mentioned previously that there will be a 'tag the last "C" midas', which version is it?
|
|
30 Aug 2012, Raquel Castillo, Forum, MIDAS in Windows
|
Hi,
I need to install MIDAS on a Windows system (Microsoft Windows Server 2003).
|
|
23 Oct 2012, Raquel Castillo, Forum, MIDAS in Windows
|
Hi Pierre-André,
sorry for the long delay, another things keep me out of this computer.
|
|
22 May 2007, Randolf Pohl, Bug Report, analyzer_init called by odb_load
|
Hi,
I wonder why mana.c:odb_load() calls analyzer_init(). This way analyzer_init
|
|
22 May 2007, Randolf Pohl, Bug Report, analyzer_init called by odb_load
|
Thanks for the quick reply, Stefan.
Please don't change anything in the code unless you find it really important. I guess
|