> Where is the example of error handling?

#include "mscbxx.h"
#include "mexcept.h"

...
   try {
   
      // connect to node 10 at submaster mscb123
      midas::mscb m("mscb123", 10);

      // print a variable
      std::cout << m["Input0"] << std::endl;
   
   } catch (mexception e) {
      std::cout << e << std::endl; // simply print exception
   }
...

Hi,
 has anyone tried runnning midas frontend on a Linux running 
on a Motorola MVME167 motorola embedded CPU?
I have seen people running Linux on a MV167 
(http://www.sleepie.demon.co.uk/linuxvme/)
so in principle this can be done.

The reason I am asking is that we have a lot of them in house 
and we would like to avoid paying for VxWorks
(I have succesfully run Midas on a mvme167/VxWorks node)

Or maybe one has come up with a much better solution 
[short of dumping mv167 into a sewer :)]

Piotr

I would like to know whether all parameters used by the frontend code have to be in the "Experiment/
Run Parameters" section.  This section can become big and difficult to maintain, because it is one single 
big section of experim.h (EXP_PARAM_DEFINED).  I have parameters the various frontends read at the 
beginning of each run, which set the hardware settings of various devices.  I would like to place these in 
a section all their own, organized by device.  Is this doable? 

Hi Jan,

I usually keep under /Experiment/Run Parameters only those settings which are kind of "global" and thus of
interest to frontend *and* analyzer, like a run mode (data/calibration/cosmic/...). Settings more specific to a
frontend I keep under /Equipment/<name>/Settings where <name> is the equipment name the specific frontend
produces. In your case each frontend will then get its own tree (related to each fragment). Please note that
both discussed trees can contain a whole tree with subdirectories, which lets you organize your data better.

Best regards, Stefan.

   We've had mhttpd aborting regularly since upgrading from midas-1.9.3.  This
happens during elog queries, and is due to an elog file that was incorrectly
modified by hand.  The modification to the file occurred 6 months ago.
   el_retrieve(midas.c:15683) now has several assert statements, one of which
aborts the program on reading the bad entry.

   Why is assert used, instead of an error return from the function (if
necessary), and maybe an error message in the log file?  Assert statements are
often removed, using NDEBUG, for normal use.

Chris

   The problem elog entry had one character removed, so end-of-file came before
the end of the message.  This could probably occur without the file being
altered, if the disk containing the elog fills.

>    We've had mhttpd aborting regularly since upgrading from midas-1.9.3.  This
> happens during elog queries, and is due to an elog file that was incorrectly
> modified by hand.

(sorry for delayed reply, for reasons unknown, I did not get an email notice when this was posted)

Yes, I agree, error handling in midas elog code is insufficient (note missing error checks for
read() and lseek() system calls). Anything but "perfect" elog files would cause funny errors and
malfunctions.

>  The modification to the file occurred 6 months ago.
>    el_retrieve(midas.c:15683) now has several assert statements, one of which
> aborts the program on reading the bad entry.

I added those to fix problems with "broken last NN days" and with infinite looping in the elog code
that we observed in TWIST.

You are welcome to replace the assert() statements with proper error handling. I used to have some code
that could report the filename of the bad elog file. Can we also report the exact file location for broken
files.

Please send me the diff, I will commit it to midas cvs.

>    Why is assert used, instead of an error return from the function (if
> necessary), and maybe an error message in the log file?  Assert statements are
> often removed, using NDEBUG, for normal use.

I use assert() in several ways:

0) I want a core dump each time X happens. (This is the only reasonable action when facing memory/stack
corruption. The problems in the elog code were stack corruption).
1) "I am too lazy to write proper error handling code" so I just crash and burn. This includes the
case where "proper error handling" would be "too invasive".
2) the error is too bad (or too deep) and there is no reasonable way to recover. Print an error message
and dump core (for later analysis). I sometimes use "cm_msg(); abort()". (assert is "printf("error"); abort()")

Please refer to literature for philosophic discussions on uses of assert() (Argh! Stefan will have my
head again!), but I will mention that "abort() early, abort() often" I find very effective. BTW, this technique
is heavily used in the Linux kernel (oops(), bug(), panic()) with some good effect, too.

>    The problem elog entry had one character removed, so end-of-file came before
> the end of the message.  This could probably occur without the file being
> altered, if the disk containing the elog fills.

Yes, I think you are right. In TWIST, we have seen disk-full conditions break both elog and history.

K.O.

What is the api call to determine the index of the frontend when specifying the
-i parameter during execution of the frontend? 

> What is the api call to determine the index of the frontend when specifying the
> -i parameter during execution of the frontend? 

INT get_frontend_index();

- Stefan

When i compile the experiment example of 1.9.5 the problem happened:

adccalib.c: In function `INT adc_calib_init()':
adccalib.c:114: `H1_BOOK' undeclared (first use this function)
adccalib.c:114: (Each undeclared identifier is reported only once for each
   function it appears in.)
make: *** [adccalib.o] Error 1

my ROOT is 4.01 and Zlib is 1.2.2

> When i compile the experiment example of 1.9.5 the problem happened:
> 
> adccalib.c: In function `INT adc_calib_init()':
> adccalib.c:114: `H1_BOOK' undeclared (first use this function)
> adccalib.c:114: (Each undeclared identifier is reported only once for each
>    function it appears in.)
> make: *** [adccalib.o] Error 1
> 
> my ROOT is 4.01 and Zlib is 1.2.2

We're in the process of fixing in the proper manner this problem, in the mean time
please add to the analyzer makefile the definition: -DUSE_ROOT at the line:
...
ROOTCFLAGS += -DHAVE_ROOT -DUSE_ROOT

Could someone please explain to me how cm_msg, cm_msg1, etc. all work.  The
documentation is very terse.  

I want to setup a fairly significant set of debugging, and error messages for a
new frontend.  I need to get these messages to a logging file.  I also would
like to get the error messages to the user through whatever interface Midas
normally uses for error reporting.  

Jan

> Could someone please explain to me how cm_msg, cm_msg1, etc. all work.  The
> documentation is very terse.  
> 
> I want to setup a fairly significant set of debugging, and error messages for a
> new frontend.  I need to get these messages to a logging file.  I also would
> like to get the error messages to the user through whatever interface Midas
> normally uses for error reporting.  

For errors, use

  cm_msg(MERROR, "routine_name", "Your error message, code=%d", i);

This produces an error message which is logged to midas.log, and distributed to all
clients which have called cm_msg_register(). For example odbedit will just print
that message. The syntax of the second half of cm_msg is the same as for printf(),
so you can add format specifiers and variable arguments as you do for printf(). The
first argument is the message type (MDEBUG for example is only distributed but not
logged). 

For a more detailed list of message types, please refer to

http://midas.triumf.ca/doc/html/AppendixE.html#midas_macro

For the record, the MIDAS (& co) forums have been physically moved from
dasdevpc.triumf.ca to our new server machine ladd00.triumf.ca. This change
should be transparent to all users, but if anything stops working, please let me
know at olchansk-at-triumf-dot-ca. K.O.

We are new to MIDAS and try to setup a simple system with one ortec camac ADC
AD413A and the hytec1331 controler. Has anyone used this module in MIDAS we
would be grateful for the corresponding frontend.c etc. 

It would be very useful to have somewhere examples of files used by various
experiments in addition to the example files provided in the installation.

Best regards,
Hans