if (script.substring(0, 1) === "[") {
   // refuse to load script if the selected a subdirectory
   return;
}

diff --git a/resources/load_script.html b/resources/load_script.html
index 41bfdccd..36caa57f 100644
--- a/resources/load_script.html
+++ b/resources/load_script.html
@@ -59,6 +59,28 @@
 </div>

 <script>
+   document.getElementById("msg_sel").onchange = function() {
+      script = this.value;
+      button = document.getElementById("load_button");
+      if (script.substring(0, 4) === "[..]") {
+         // Change button to go back
+         enable_button_by_id("load_button");
+         button.innerHTML = "Back";
+         button.onclick = up_subdir;
+      } else if (script.substring(0, 1) === "[") {
+         // Change button to load subdirectory
+         enable_button_by_id("load_button");
+         button.innerHTML = "Enter subdirectory";
+         button.onclick = load_subdir;
+      } else {
+         // Change button to load script
+         enable_button_by_id("load_button");
+         button = document.getElementById("load_button");
+         button.innerHTML = "Load script";
+         button.onclick = load_script;
+      }
+   }
+
 function set_if_changed(id, value)
 {
    var e = document.getElementById(id);

/usr/include/string.h:506:15: error: declaration of ‘size_t strlcpy(char*, const char*, size_t) noexcept’ has a 
different exception specifier
  506 | extern size_t strlcpy (char *__restrict __dest,
      |               ^~~~~~~
In file included from /home/luk/midas/src/midas.cxx:14:
/home/luk/midas/include/midas.h:2190:17: note: from previous declaration ‘size_t strlcpy(char*, const 
char*, size_t)’

#if (__GLIBC__ > 2) || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 38)
#ifndef HAVE_STRLCPY
#define HAVE_STRLCPY 1
#endif
#endif

Using the mouse to click and drag on a logarithmic y axis triggers a zooming behaviour as if the user zoomed in on a linear axis. 

How to reproduce:
Take a plot that ranges from 1e-20 to 100, for example. Click around the middle of the axis and drag the mouse up to about 3/4.

Expected result:
Limit the y axis to the approximate range 1e-10 to 1e-4

Actual result:
The y axis limits are around 50 and 75.


P.S. Is there a way to configure the history plot in a way that values of 0.00 are ignored rather than showing up as 1e-20?

("0" + leftDate.getUTCMonth() + 1).slice(-2)

("0" + (leftDate.getUTCMonth() + 1)).slice(-2)

[mhist,ERROR] [midas.cxx:5949:bm_validate_client_index,ERROR] My client index 10 in buffer 'SYSMSG' 
is invalid: client name '', pid 0 should be my pid 3773321
[mhist,ERROR] [midas.cxx:5952:bm_validate_client_index,ERROR] Maybe this client was removed by a 
timeout. See midas.log. Cannot continue, aborting...
Aborted (core dumped)

mhist -e "Xenon" -l

$ mhist -e "Xenon" -v "Det XeTmp 0-0" -t 100000 -s 200101 -p 250101 -f 
/data2/history/2022/mhf_1644698398_20220212_xenon.dat
ID 980316009, Aug 13 19:10:56, size 1851749486

• Bug: mhist -l crashes
  
• Bug: mhist -f does not work with "FILE" history format
  
• Feature request: mhist -e "Name" -l to only show variables of event "Name"
  
• Feature request: Set temporary history dir with a flag
  

• cd command: Typing cd without arguments now changes the directory to /, similar to the behaviour of the cd command in Linux sending you to the home directory.
  
• Exit behavior: Upon exiting the program with Ctrl+C, a newline character is printed so that the command line starts on an empty line rather than the last line from odbedit.
  

@@ -1668,7 +1668,10 @@ int command_loop(char *host_name, char *exp_name, char *cmd, char *start_dir)

       /* cd */
       else if (param[0][0] == 'c' && param[0][1] == 'd') {
-         compose_name(pwd, param[1], str);
+         if (strlen(param[1]) == 0)
+            strcpy(str, "/");
+         else
+            compose_name(pwd, param[1], str);

          status = db_find_key(hDB, 0, str, &hKey);

@@ -2962,6 +2965,7 @@ void ctrlc_odbedit(INT i)

    cm_disconnect_experiment();

+   printf("\n");
    exit(EXIT_SUCCESS);
 }

Hello, 
I'm trying to make Wiener PCIVME link work with MIDAS. 
In documentation/VME dirvers/ it's saying: "wevmemm.c PCI/VME Wiener board
supported. (see Wiener PCI)".
Provided link is dead. Does anyone have that file? I would appreciate very very
much if someone could send it to me.

Thank you and best regards, 
L.P.

Good afternoon,

After updating Midas to the latest develop commit 
(0f5436d901a1dfaf6da2b94e2d87f870e3611cf1) we found out a bug when starting 
sequencer. If we have a simple loop from start value to stop value and step 
size, just printing the value at each iteration, we see everything good (see 
first attachment). Then we included another script though, which contains 
several subroutines we defined for our detector, and we try to run the same 
script. Unfortunately after this the parameters seem uninitialized, and the 
value at each loop does not make sense (see second attachment). Also, sometimes 
when pressing run the set parameter window would pop-up, but sometimes not.

The script is this one:

>>>
COMMENT Test script to check for a specific bug

INCLUDE global_basic_functions

#CALL setup_paths
#CALL generate_DUT_params

PARAM lv_start, "Start of LV", 1.8
PARAM lv_stop, "Stop of LV", 2.1
PARAM lv_step, "Step of LV", 0.02

n_iterations = (($lv_stop - $lv_start)/$lv_step)

MSG "Parameters:"
MSG $lv_start
MSG $lv_stop
MSG $lv_step
MSG $n_iterations

MSG "Start of looping"

LOOP n, $n_iterations
   lv_now = $lv_start + $n * $lv_step
   MSG $lv_now
   WAIT SECONDS, 1
ENDLOOP
<<<

and the only difference comes from commenting the line:

>>>
INCLUDE global_basic_functions
<<<

as global_basic_functions is defined as a LIBRARY and it includes 75 (!) 
subroutines...

Is it possible that when loading a large script it messes up the loading of 
parameters?

Thank you very much,
Regards,
Luigi.

It is pretty much the same as Stefan, I attach here the screenshots. Also in my case it works sometimes, and sometimes partially (one or 2 params, like in 
attachment 3).

> Could you please export and send me the /Sequencer ODB tree (or just /Sequencer/Param and /Sequencer/Variables) in both cases while the sequence is running. 
> 
> thanks,
> Zaher
> 
> 
> > Good afternoon,
> > 
> > After updating Midas to the latest develop commit 
> > (0f5436d901a1dfaf6da2b94e2d87f870e3611cf1) we found out a bug when starting 
> > sequencer. If we have a simple loop from start value to stop value and step 
> > size, just printing the value at each iteration, we see everything good (see 
> > first attachment). Then we included another script though, which contains 
> > several subroutines we defined for our detector, and we try to run the same 
> > script. Unfortunately after this the parameters seem uninitialized, and the 
> > value at each loop does not make sense (see second attachment). Also, sometimes 
> > when pressing run the set parameter window would pop-up, but sometimes not.
> > 
> > The script is this one:
> > 
> > >>>
> > COMMENT Test script to check for a specific bug
> > 
> > INCLUDE global_basic_functions
> > 
> > #CALL setup_paths
> > #CALL generate_DUT_params
> > 
> > PARAM lv_start, "Start of LV", 1.8
> > PARAM lv_stop, "Stop of LV", 2.1
> > PARAM lv_step, "Step of LV", 0.02
> > 
> > n_iterations = (($lv_stop - $lv_start)/$lv_step)
> > 
> > MSG "Parameters:"
> > MSG $lv_start
> > MSG $lv_stop
> > MSG $lv_step
> > MSG $n_iterations
> > 
> > MSG "Start of looping"
> > 
> > LOOP n, $n_iterations
> >    lv_now = $lv_start + $n * $lv_step
> >    MSG $lv_now
> >    WAIT SECONDS, 1
> > ENDLOOP
> > <<<
> > 
> > and the only difference comes from commenting the line:
> > 
> > >>>
> > INCLUDE global_basic_functions
> > <<<
> > 
> > as global_basic_functions is defined as a LIBRARY and it includes 75 (!) 
> > subroutines...
> > 
> > Is it possible that when loading a large script it messes up the loading of 
> > parameters?
> > 
> > Thank you very much,
> > Regards,
> > Luigi.

[quote="Zaher Salman"]I think that I finally managed to fix the problem. The default values of the parameters are now written first in one go, then the sequencer waits for confirmation that everything is completed before proceeding. Please test and let me know if there are still any issues. Zaher [/quote]

> I have the following problems after updating to midas SVN 4936: the history 
> system (web-page via mhttpd) seems to stop working. I checked the history files 
> themself and they are indeed written, except that the events ID's are not the 
> same anymore (I mean the ones defined under /Equipment/XXX/Common/Event ID), 
> rather the mlogger seems to choose an ID by itself.
> Currently the only way to get things working again was to recompile midas with 
> adding -DOLD_HISTORY to the CFLAGS which is troublesome since it is likely to be 
> forgotton with the next SVN update. When looking into the SVN I have the 
> impression there is something going on concerning the history system, however
> I couldn't find any documentation.
> What is the best practice for the future, in order not to run into any problems 
> but still being able to look at the old history (also from within the web-page 
> via mhttpd)?

Hi... 

Do you mind giving little more detail? We might have the same issue, where we got
complaints that midas history stops working after a certain time.

L

> > 
> > Do you mind giving little more detail? We might have the same issue, where we got
> > complaints that midas history stops working after a certain time.
> > 
> 
> 
> Yes, please do supply more information. What problems do *you* see?
> 
> 
> K.O.

Hi.

uhm, mine might be completely unrelated to this, but it just so happened that the rev.
4936 was one that was used in a recent experiment, in which there was complaints about
the responsiveness of the history plots. The history plots would take up to 30 seconds
to respond, if the run was about 30-40 minutes old. When the run is about  < 10 minutes
old , the history plot was responsive to within 1-2 seconds.

I received rather limited information regarding this problem. So hence my apprehension
on stating it as a *problem* or bug. It could be something related to hardware/beam etc.

Lee

> For our MIDAS installation at Fermilab, it is necessary that we be able to write to a PosgresQL 
> database (MySQL is not supported here). This will be required of both mlogger and mscb. 
> 
> Has anyone done this before? And do you know of a relatively simple way of implementing it, or do 
> we need to replicate the mysql functions that are already in the mlogger/mscb code to add functions 
> that perform the equivalent Posgres commands?
> 
> Thanks!
> Wes

Hi Wes

I did this a few years ago, and replicated the mysql functions within mlogger. 

Lee

Hi

> On one side, such checksums help me confirm that uncompressed data contents is the same as original 
> data (compression/decompression is okey).
> 

> I can write the computed checksums into midas.log, or into runNNN.crc32, runNNN.sha256, etc files. (or 
> both).
> 

Just a thought on my side. I have been using a checksum, on data produced  by our experiments via mlogger, the runxxxx.mid.gz, in 
the same manner you proposed and I see now implemented. 

I have a slight, objection, if I may call it that, to how the checksum is saved to disk, in 
run00007.mid.gz.sha256 as an example.


$ cat ~/Data/run00007.mid.gz.sha256
f315af7caf6ca204cc082132862cb4227d77066cb60c6e2b1039d6dc5b04d1ee 650597 Data/run00007.mid.gz


It seems a little misleading to have the gzip'd filename paired with the checksum of the uncompressed content.

May I suggest that the pairing should be ,

f315af7caf6ca204cc082132862cb4227d77066cb60c6e2b1039d6dc5b04d1ee  run00007.mid as an example.

As I find, this information will sit in an archive, database in my case for a long period, and it might
be confusing later on, when verification of the checksum is required.

Hi,

So I finally got around to "publish" work I did in 2009/2010 with RTEMS.

The work was mainly between myself and Till Straumann (SLAC), and Dr. Joel 
Sherill, to get VME support for vme universe/vme tsi148 ( basic support ), into 
the i386 bsp.

https://bitbucket.org/lcpool2/midas-k600/src/develop/ ( our rtems port ).


What this did was to allow us to run our various VME single board controllers, 
with a single frontend application.

It is still classified testing but its been very successful, so
far, and I hope to use it in the next experiment, if possible.

The midas port, contains a makefile, and some changes to the 
midas.c/system.c/mfe.c files. I've not tested  the full functionality
as I'm super time limited.

Hope this is help full to others...

> We're using the History Logger MIDAS feature and writing to mySQL tables, but 
> in some cases have run into issues installing mySQL on centos7 systems.
> 
> Has anyone ever tried running this MIDAS feature with MariaDB rather than 
> mySQL?

Hi

I've used MIDAS Logger feature with MariaDB and had no issue thus far .