 03 Aug 2023, Caleb Marshall, Forum, Issues with Universe II Driver
|
I am looking into compiling the 32 bit midas.
In the meantime, here is the kernel info:
|
|
04 Aug 2023, Caleb Marshall, Forum, Issues with Universe II Driver
|
I can compile 32 bit midas. Unless I am interpreting the linking error, I don't
think I can use the driver as built.
|
|
04 Aug 2023, Konstantin Olchanski, Forum, Issues with Universe II Driver
|
> I can compile 32 bit midas. Unless I am interpreting the linking error, I don't
> think I can use the driver as built.
|
|
09 Aug 2023, Konstantin Olchanski, Forum, pull request for PostgreSQL support
|
> The compilation of midas was broken by the last modification. The reason is that
> Pgsql *fPgsql = NULL;
> was not protected by #ifdef HAVE_PGSQL
|
 08 Sep 2023, Nick Hastings, Forum, Hide start and stop buttons
|
The wiki documents an odb variable to enable the hiding of the Start and Stop buttons on the mhttpd status page
https://daq00.triumf.ca/MidasWiki/index.php//Experiment_ODB_tree#Start-Stop_Buttons
|
|
08 Sep 2023, Nick Hastings, Forum, Hide start and stop buttons
|
> Is there now some other mechanism to hide the start and stop buttons?
> Note that this is for a pure slow control system that does not take runs.
|
|
13 Sep 2023, Stefan Ritt, Forum, Hide start and stop buttons
|
Indeed the ODB settings are obsolete. Now that the status page is fully dynamic
(JavaScript), it's much more powerful to modify the status.html page directly. You
can not only hide the buttons, but also remove the run numbers, the running time,
|
13 Sep 2023, Nick Hastings, Forum, Hide start and stop buttons 
|
Hi Stefan,
> Indeed the ODB settings are obsolete.
|
|
13 Sep 2023, Stefan Ritt, Forum, Hide start and stop buttons
|
> Hi Stefan,
>
> > Indeed the ODB settings are obsolete.
|
|
14 Sep 2023, Konstantin Olchanski, Forum, Hide start and stop buttons
|
I believe the original "hide run start / stop" was added specifically for ND280 GSC MIDAS. I do not know
why it was removed. "hide pause / resume" is still there. I will restore them. Hiding logger channel
section should probably be automatic of there is no /logger/channels, I can check if it works and what
|
|
14 Sep 2023, Nick Hastings, Forum, Hide start and stop buttons
|
Hi
> > > Indeed the ODB settings are obsolete.
|
|
14 Sep 2023, Stefan Ritt, Forum, Hide start and stop buttons
|
> I believe the original "hide run start / stop" was added specifically for ND280 GSC MIDAS. I do not know
> why it was removed. "hide pause / resume" is still there. I will restore them. Hiding logger channel
> section should probably be automatic of there is no /logger/channels, I can check if it works and what
|
|
15 Sep 2023, Stefan Ritt, Forum, Hide start and stop buttons
|
> I believe the original "hide run start / stop" was added specifically for ND280 GSC MIDAS. I do not know
> why it was removed. "hide pause / resume" is still there. I will restore them. Hiding logger channel
> section should probably be automatic of there is no /logger/channels, I can check if it works and what
|
|
23 Oct 2023, Francesco Renga, Forum, Device with inputs and outputs
|
Dear all,
I'm writing a very simple device driver starting from the nulldev.cxx
example.
|
|
24 Oct 2023, Stefan Ritt, Forum, Device with inputs and outputs
|
The "multi" class driver takes care of that. It properly calls the SET and GET functions
with the correct index. The code for that is in multi.cxx:105:
|
|
13 Nov 2023, Ivo Schulthess, Forum, mlogger does not HAVE_ROOT
|
Good evening,
I am setting up Midas (v2.1) for a new experiment. We want to save the data in the ROOT format. We installed ROOT from source (v6.28/06), and ROOTSYS is |
|
13 Nov 2023, Konstantin Olchanski, Forum, mlogger does not HAVE_ROOT
|
> I am setting up Midas (v2.1) for a new experiment. We want to save the data in the ROOT format. We installed ROOT from source (v6.28/06), and ROOTSYS
is set. When we compile Midas, it says that it found ROOT. We set up a second logger channel where we set the filename to run%05d.root, the format to ROOT,
and the output to ROOT. Nevertheless, when starting a run, the logger writes the error that "channel '1' requested ROOT output, but mlogger is built without |
|
13 Nov 2023, Stefan Ritt, Forum, mlogger does not HAVE_ROOT
|
When you do "cmake .." in the build directory, you will see
-- MIDAS: Found ROOT version xxx in yyy
|
|
14 Nov 2023, Konstantin Olchanski, Forum, mlogger does not HAVE_ROOT
|
> Finally, make sure you start "rmlogger" and not "mlogger". Only "rmlogger" contains the ROOT binding.
Stefan is right. I forgot this. As solution to our troubles, mlogger is built without root support. use rmlogger instead.
|
|
14 Nov 2023, Ivo Schulthess, Forum, mlogger does not HAVE_ROOT
|
> Stefan is right. I forgot this. As solution to our troubles, mlogger is built without root support. use rmlogger instead.
>
> K.O.
|