Recently, default values of steering parameters in romeConfig.xml are always 0. They are not as same 
as values in SPFieldInitialization of definition XML file.

In online mode, ROME often stops before finishing to analyze all events of runs. 
 When it happens, gAnalyzer->GetCurrentEventNumber() starts not from 1 but from analyzed event 
number at previous run. And unanalyzed events at the previous run are mixed with the new run.

In mana.c of MIDAS, I found a part to wait until all events in buffers are analyzed when analyzer gets 
TR_STOP signal, while ROME does not have.

I personaly don't need that all events are analyzed, but it is really problem that data of two runs are 
mixed.

One way is to take similar way as midas analyzer, and the another way is just discard unanalyzed 
events.

We sometimes want to use trees in ROME.

One way is to read it by TSocket connection. But treees are larger than histograms in general, and it 
takes time to download. 
 And I need to make shared library when I changed the structure of folders.

So, I want to propose is to prepare Cint mode with continueing analysis in background.

Currently, when user press "i", ROME stops analysis and goes into cint mode. This is good for offline 
mode, but this is not good for online mode. So I propose that when user press "I", ROME goes cint 
mode, and continue analysis in background.

Then we can see Trees at run time.

In addition, If you are going to implement this feature, please prepare short way to call trees in cint mode.
If I understand correctly, the way to call a tree is like,
gAnalyzer->GetTreeObjectAt(0)->GetTree()->Draw("");
but it is too long to use in interactively and we need to remeber the number of trees.
gAnalyzer->GetTree("trigger")->Draw();  is better.

We usually use ROME framework without specifying run number in romeConfig.xml and command line 
in online mode.

Then it warns that "Error in <TArrayI::At>: index 0 out of bounds" when gROME-
>GetRunNumberStringAt(runNumberString,0) is called in ROMEEventLoop::Initialize.

About <EventHeader> in xml definition file.

In description page in ROME homepage, It is wirtten that <EventId> specifies the field.
But It seems that 'd' shoud be capital.

> > I implemented the cm_msg calls.
> 
> You should implement a central "message dispatcher". So all errors etc. should go to someting linke
> rome_msg(). If compiled with midas online support, rome_msg() should call cm_msg(). If rome is compiled
> without midas libraries, a printf() there would be enough. If someone uses rome in a different
> environment, only can function needs to be changed to reroute all messages to somewhere else.

Of course, that's the way I implemented that.

> I implemented the cm_msg calls.

You should implement a central "message dispatcher". So all errors etc. should go to someting linke
rome_msg(). If compiled with midas online support, rome_msg() should call cm_msg(). If rome is compiled
without midas libraries, a printf() there would be enough. If someone uses rome in a different
environment, only can function needs to be changed to reroute all messages to somewhere else.

> About warnings,errors and informations output in online mode.
> 
> Probably we lauch ROME from web interface of MIDAS. And we don't see console of ROME.
> But we need to hear what ROME is saying.
> 
> Normally midas analyzer and other applications use cm_msg function. This function shows messages 
> proper place like web interface or ODBEdit windows and so on.
> 
> I do not have much knowledge about it. Stefan may know better way.

I implemented the cm_msg calls.

> These are not critical, but someone may complain some day.
> 
> 1. ROMEBuilder.cpp:2315
>  I wonder if maxNumberOfTasks should be maxNumberOfSteering.
>  // count steering parameters
>    2316    numOfSteering[iTask]++;
>    2317    currentNumberOfSteerings = numOfSteering[iTask];
>    2318    if (numOfSteering[iTask]>=maxNumberOfTasks+1) {
>    2319       cout << "Maximal number of steering parameters reached : " << (max   2319 
> NumberOfTasks+1) << " !" << endl;
>    2320       cout << "Terminating program." << endl;
>    2321       return false;
>    2322    }
> 
> 2. ROMEBuilder.cpp:2437
>  I wonder if maxNumberOfSteering should be maxNumberOfSteeringField.
>     if (numOfSteerFields[iTask][actualSteerIndex]>=maxNumberOfSteer   
>    2437 ing) {
>    2438             cout << "Maximal number of steering parameter fields in task   2438  '" << 
> taskName[iTask].Data() << "' reached : " << maxNumberOfSteering <   2438 < " !" << endl;
>    2439             cout << "Terminating program." << endl;
>    2440             return false;
>    2441          }
> 
> 
> 3. ROMEBuilder.cpp:6327
>  I wonder if ROOTSYS should be ROOTSYS/include.
>  6327 #if defined( _MSC_VER )
>    6328    buffer.AppendFormatted("-I%%ROMESYS%%/include ");
>    6329    buffer.AppendFormatted("-I%%ROOTSYS%% ");
>    6330 #endif
>    6331 #if defined ( __linux__ ) || defined ( __APPLE__ )
>    6332    buffer.AppendFormatted("-I$ROMESYS/include ");
>    6333    buffer.AppendFormatted("-I$ROOTSYS ");
>    6334 #endif
> 
> 4. ROMEBuilder.cpp:6806
> in ROMEBuilder::isNumber, there are some missing number types such as.
> Double32_t,Long64_t,ULong64_t
> 
> 5. ROMEBuilder.cpp:6821
> in ROMEBuilder::isFloatingType, there are some missing floating types such as.
> Double32_t


Thanks

These are not critical, but someone may complain some day.

1. ROMEBuilder.cpp:2315
 I wonder if maxNumberOfTasks should be maxNumberOfSteering.
 // count steering parameters
   2316    numOfSteering[iTask]++;
   2317    currentNumberOfSteerings = numOfSteering[iTask];
   2318    if (numOfSteering[iTask]>=maxNumberOfTasks+1) {
   2319       cout << "Maximal number of steering parameters reached : " << (max   2319 
NumberOfTasks+1) << " !" << endl;
   2320       cout << "Terminating program." << endl;
   2321       return false;
   2322    }

2. ROMEBuilder.cpp:2437
 I wonder if maxNumberOfSteering should be maxNumberOfSteeringField.
    if (numOfSteerFields[iTask][actualSteerIndex]>=maxNumberOfSteer   
   2437 ing) {
   2438             cout << "Maximal number of steering parameter fields in task   2438  '" << 
taskName[iTask].Data() << "' reached : " << maxNumberOfSteering <   2438 < " !" << endl;
   2439             cout << "Terminating program." << endl;
   2440             return false;
   2441          }


3. ROMEBuilder.cpp:6327
 I wonder if ROOTSYS should be ROOTSYS/include.
 6327 #if defined( _MSC_VER )
   6328    buffer.AppendFormatted("-I%%ROMESYS%%/include ");
   6329    buffer.AppendFormatted("-I%%ROOTSYS%% ");
   6330 #endif
   6331 #if defined ( __linux__ ) || defined ( __APPLE__ )
   6332    buffer.AppendFormatted("-I$ROMESYS/include ");
   6333    buffer.AppendFormatted("-I$ROOTSYS ");
   6334 #endif

4. ROMEBuilder.cpp:6806
in ROMEBuilder::isNumber, there are some missing number types such as.
Double32_t,Long64_t,ULong64_t

5. ROMEBuilder.cpp:6821
in ROMEBuilder::isFloatingType, there are some missing floating types such as.
Double32_t

> This is not so strong suggestion. I am just wondering.
> 
> Currently ROME include headers of midas, xml2 and mysql.
> There are libraries for windows but no libraries for linux.
> 
> I am afraid that there can be inconsequence between headers and libraries in futrue updates of these 
> libraries, if compiler reads headers from rome/include instead of correct one.
> 
> So, my suggestion is that move midas.h,libxml2 and mysql outside of header files search path for linux.
> 
> for instance
>   Make new directory rome/include/win.
>   Put midas.h,libxml2 and mysql into it.
>   Add $ROMESYS/include/win into header files search path in case of Windows.
> 
> 
> P.S.
> If midas.h is already very different from midas.h in MIDAS. This may be difficult.

I looked into gcc, then I found the header file which is found first is supposed to be used.
In ROME's case $(shell xml2-config --cflags) and $(shell mysql_config --cflags) are located before -I$(ROMESYS)/include/, so in principle 
it is safe.

But about midas.h there still can be inconsequence, because -I$(ROMESYS)/include/ is located before -I$(MIDASSYS)/include/.
It this done on purpose to enable special features for ROME ?


---
One more thing. about libpaths.
If libpaths will be used only for specify the place where midas libraries were put. Followings can also work and more simple.
And I added midascflags, because to use same way as root,xml2 and mysql seems more beautiful. 
And I moved -DHAVE_SQL and -DHAVE_MIDAS to sqlcflags and midascflags.

rootlibs := $(shell root-config --libs)
rootglibs := $(shell root-config --glibs)
rootcflags := $(shell root-config --cflags)
rootthreadlibs := -lThread
xmllibs :=  $(shell xml2-config --libs)
xmlcflags :=  $(shell xml2-config --cflags)
sqllibs := $(shell mysql_config --libs)
sqlcflags := $(shell mysql_config --cflags) -DHAVE_SQL
midaslibs := -L$(MIDASSYS)/lib -lmidas
midascflags := -I$(MIDASSYS)/include -DHAVE_MIDAS
clibs :=-lpthread -lHtml $(SYSLIBS)
clibs += -lutil

Libraries := $(libpaths) $(rootlibs) $(rootglibs) $(rootthreadlibs) $(xmllibs) $(clibs) $(sqllibs) $(midaslibs)
Flags := $(lpuserflags) $(rootcflags) $(xmlcflags) $(sqlcflags) $(midascflags)
Includes := -I$(ROMESYS)/include/ -I. -Iinclude/ -Iinclude/tasks/ -Iinclude/framework/

About warnings,errors and informations output in online mode.

Probably we lauch ROME from web interface of MIDAS. And we don't see console of ROME.
But we need to hear what ROME is saying.

Normally midas analyzer and other applications use cm_msg function. This function shows messages 
proper place like web interface or ODBEdit windows and so on.

I do not have much knowledge about it. Stefan may know better way.

This is not so strong suggestion. I am just wondering.

Currently ROME include headers of midas, xml2 and mysql.
There are libraries for windows but no libraries for linux.

I am afraid that there can be inconsequence between headers and libraries in futrue updates of these 
libraries, if compiler reads headers from rome/include instead of correct one.

So, my suggestion is that move midas.h,libxml2 and mysql outside of header files search path for linux.

for instance
  Make new directory rome/include/win.
  Put midas.h,libxml2 and mysql into it.
  Add $ROMESYS/include/win into header files search path in case of Windows.


P.S.
If midas.h is already very different from midas.h in MIDAS. This may be difficult.

> After change of ROMEEventLoop.cpp 1.39, Program steerings don't work on Linux.

Sorry.

After change of ROMEEventLoop.cpp 1.39, Program steerings don't work on Linux.

When I built my application with romebuilder.
It complained like,
Error : File './/src/tasks/LPTXEGainCalib.cpp' has an invalid header !!!
Error : File './/src/tasks/LPTXETimeCalib.cpp' has an invalid header !!!
Error : File './/src/tasks/LPTUTTask.cpp' has an invalid header !!!

Headers looks like,
//// Author: Ryu Sawada
/////////////^@//////////////////////////////////////////////////////////////////
//                                                                            //

Thre first time to build Just after I removed ^@, builder stopped warning. 
But after that  ^@ appeared again and builder starts warning.

I have several task files, but builder adds ^@ always these three files.

My source files are here.
cvs -d :ext:pc4466.psi.ch:/usr/local/cvsroot co lpframework

> I was asked to put change log of my rome application(LPframewok). I think the best place to put it is the 
> html file which builder created.  But of course to modify it is not good, because it will be overwritten by 
> builder again.
> 
> So, I want to propose to allow user to add links in the html file with the way like followings.
> 
> (i) User defines links.
> ------   in LPframewok.xml   ------
> <DocumentLinks>
> 	<DocumentLink>
> 		<Href>html/changelog.html</Href>
> 		<Text>Change log</Text>
> 	</DocumentLink>
> </DocumentLinks>
> -----------------------------------
> 
> (ii)And html files looks like
> -----------------------------------
> Table of Contents
> 
>   • Introduction
>   • Objects in the LPframework
>       ? Tasks
>       ? Folders
>       ? Trees
>       ? Midas Banks
>   • Access Methods to Objects in the LPframework
>       ? Folders
>       ? Data Base
>       ? Steering Parameters
>       ? Histograms
>       ? Midas Banks
>       ? General
>   • Class Overview
>   • Links
>       ? Change log
> -----------------------------------
> 
> (iii)Users must write the target(html/changelog.html).

There will be a new link available "Additional Info" after "Class Overview".

This points to a file named "UserHTML.html" which can be modified by the user.

> When I made task description longer than about 80 characters. The description was not written in html 
> file propery. It was shorten.
> 
> I guess following lines in ROMEBuilder.cpp are relating to this.
> 
> 
> -----------
>       pos = (char*)taskDescription[iTask].Data();
>       lenTot = taskDescription[iTask].Length();
>       while (pos-taskDescription[iTask].Data() < lenTot) {
>          if (lenTot+(taskDescription[iTask].Data()-pos)<74) 
>             i=TMath::Min(75,lenTot);
>          else for (i=74;pos[i]!=32&&i>0;i--) {}
>          if (i<=0)
>             i=TMath::Min(75,lenTot);
>          pos[i] = 0;
>          buffer.AppendFormatted("// %-74.74s   \n",pos);
>          pos = pos+i+1;
>       }

done. thanks.

> When I made task description longer than about 80 characters. The description was not written in html 
> file propery. It was shorten.
> 
> I guess following lines in ROMEBuilder.cpp are relating to this.
> 
> 
> -----------
>       pos = (char*)taskDescription[iTask].Data();
>       lenTot = taskDescription[iTask].Length();
>       while (pos-taskDescription[iTask].Data() < lenTot) {
>          if (lenTot+(taskDescription[iTask].Data()-pos)<74) 
>             i=TMath::Min(75,lenTot);
>          else for (i=74;pos[i]!=32&&i>0;i--) {}
>          if (i<=0)
>             i=TMath::Min(75,lenTot);
>          pos[i] = 0;
>          buffer.AppendFormatted("// %-74.74s   \n",pos);
>          pos = pos+i+1;
>       }

done. thanks.

When I made task description longer than about 80 characters. The description was not written in html 
file propery. It was shorten.

I guess following lines in ROMEBuilder.cpp are relating to this.


-----------
      pos = (char*)taskDescription[iTask].Data();
      lenTot = taskDescription[iTask].Length();
      while (pos-taskDescription[iTask].Data() < lenTot) {
         if (lenTot+(taskDescription[iTask].Data()-pos)<74) 
            i=TMath::Min(75,lenTot);
         else for (i=74;pos[i]!=32&&i>0;i--) {}
         if (i<=0)
            i=TMath::Min(75,lenTot);
         pos[i] = 0;
         buffer.AppendFormatted("// %-74.74s   \n",pos);
         pos = pos+i+1;
      }