This is a common problem I also encountered in the past. You get a low-level ODB access error (could also be a read of a non-existing key) and you 
have no idea where this comes from. Could be the alarm system, a mhttpd web page, even some user code in a front-end over which the midas library 
has no control.

One option would be to add a complete stack dump to each of these error (ROOT does something like that), but I hear already people shouting "my 
midas.log is flooded with stack dumps!". So what I do in this case is I run a midas program in the debugger and set a breakpoint (in your case at 
odb.cxx:6967). If the breakpoint triggers, I inspect the stack and find out where this comes from.

Not that I print a stack dump for such error in the odbxx API. This goes to stdout, not the midas log, and it helped me in the past. Unfortunately 
stack dumps work only under linux (not MacOSX), and they do not contain all information a debugger can show you.

It is not true that alarm conditions are evaluated when the alarm system is off. I just tried and it works fine. The code is here:

alarm.cxx:591

      /* check global alarm flag */
      flag = TRUE;
      size = sizeof(flag);
      db_get_value(hDB, 0, "/Alarms/Alarm system active", &flag, &size, TID_BOOL, TRUE);
      if (!flag)
         return AL_SUCCESS;

so no idea why you see this error if you correctly st "Alarm system active" to false.

Stefan

I am updating the TRIUMF IRIS experiment to the latest version of MIDAS. I see following error messages in midas.log:

19:06:16.806 2024/05/16 [mhttpd,ERROR] [odb.cxx:6967:db_get_data_index,ERROR] index (29) exceeds array length (20) for key 
"/Equipment/Beamline/Variables/Measured"

19:06:15.806 2024/05/16 [mhttpd,ERROR] [odb.cxx:6967:db_get_data_index,ERROR] index (30) exceeds array length (20) for key 
"/Equipment/Beamline/Variables/Measured"

The errors are correct, there is only 20 elements in that array. The errors are coming every few seconds, they spam midas.log. How do I fix 
them? Where do they come from? There is no additional diagnostics or information to go from.

In the worst case, they come from some custom web page that reads wrong index variables from ODB. mhttpd currently provides no diagnostics to 
find out which web page could be causing this.

But maybe it's internal to MIDAS? I save odb to odb.json, "grep Measured odb.json" yields:
iris00:~> grep Measured odb.json 
        "Condition" : "/Equipment/Beamline/Variables/Measured[29] > 1e-5",
        "Condition" : "/Equipment/Beamline/Variables/Measured[30] < 0.5",

So wrong index errors is coming from evaluated alarms.
ODB "/Alarms/Alarm system active" is set to "no" (alarm system is disabled), the errors are coming.
ODB "/Alarms/Alarms/TP4/Active" is set to "no" (specific alarm is disabled), the errors are coming.
WTF? (and this is recentish borkage, old IRIS MIDAS had the same wrong index alarms and did not generate these errors).

Breakage:
- where is the error message "evaluated alarm XXX cannot be computed because YYY cannot be read from ODB!"
- disabled alarm should not be computed
- alarm system is disabled, alarms should not be computed

K.O.

P.S. I am filing bug reports here, I cannot be bothered with the 25-factor authentication to access bitbucket.

root_v6.30.06.Linux-ubuntu22.04-x86_64-gcc11.4 the libtbb-dev package.

This is a new requirement and it is not listed in the ROOT dependancies page (I left a note on the ROOT forum, hopefully it will be 
fixed quickly). https://root.cern/install/dependencies/

Symptom is when starting ROOT, you get an error:
cling::DynamicLibraryManager::loadLibrary(): libtbb.so.12: cannot open shared object file: No such file or directory
and things do not work.

Fix is to:
apt install libtbb-dev

K.O.

[quote="Zaher Salman"]I think that I finally managed to fix the problem. The default values of the parameters are now written first in one go, then the sequencer waits for confirmation that everything is completed before proceeding. Please test and let me know if there are still any issues. Zaher [/quote]

> Actually I realized that a 1ms wait still works, so I reduced it to that.
> 
> Stefan

Thank you so much, Stefan. I have tested your changes, and it seems like this does 
the job for our purposes. Very appreciated!

Best regards,
Musaab Faozi

Actually I realized that a 1ms wait still works, so I reduced it to that.

Stefan

Indeed there was a sleep(100ms) in the sequencer in each loop. I reduced it now to 10ms. I need at least 10ms since otherwise 
the sequencer would run in an infinite loop during the wait and burn 100% CPU. The smallest time slice on Linux to sleep is 
10ms, so that's why I set it to that. Give it a try.

Stefan

> > Ok, I implemented the float second wait function. Internally it works in ms, so the maximum resolution is 0.001 s.
> > 
> > Best,
> > Stefan
> 
> Thank you, we will test this soon and let you know if we see any issues (but we're not expecting any).

Hello Stefan,

Thank you for the help you provided for us so far. I tried your code changes on our midas fork. Now, I notice that any 
wait command takes at least 0.2 seconds to run. 

For example, when I use the following script:
SCRIPT source scripts/time_print.sh
WAIT Seconds, 0.1
SCRIPT source scripts/time_print.sh
WAIT Seconds, 0.1
SCRIPT source scripts/time_print.sh

The time_print.sh script prints time segments separated by almost exactly 0.2 seconds. Same goes for when I use 0.01 
second waits.

However, when I use 0.2 seconds wait, then I get time segments separated by 0.3 seconds. I also tried something like 
this:
SCRIPT source scripts/time_print.sh
WAIT Seconds, 0.2
WAIT Seconds, 0.2
SCRIPT source scripts/time_print.sh
WAIT Seconds, 0.2
WAIT Seconds, 0.2
SCRIPT source scripts/time_print.sh

This script results in time segements of 0.6 seconds difference. It is not immidiately clear to me from the sequencer 
code what causes this effect. The code as it stands is a lot better than what we had before the changes, but I am 
wondering if this can be reduced to the order of 1ms or 10ms.

Best regards,
Musaab Faozi

Seems to me like the problem happens less frequently, but I still see it (1 out of 5 or so). The fact that /Sequencer/Params/Value is empty tells me that the GUI 
has the problem and not the sequencer side.

Stefan

Thanks for the hint Stefan. I pushed a possible fix but I cannot test it since I cannot reproduce the issue.

> Ahh, that rings a bell:
> 
> 1) JS opens start dialog box
> 2) User enters parameters and presses start
> 3) JS writes parameters
> 4) JS starts sequencer
> 5) Sequencer copies parameters to variables
> 
> Now how do you handle 3) and 4). Just issue two mjsonrpc commands together? What then could happen is that 4) is executed before 3) and we get the garbage.
> You have to do 3) and WAIT for the return ("then" in the JS promise), and only then issue 4) from there.
> 
> Stefan

Ahh, that rings a bell:

1) JS opens start dialog box
2) User enters parameters and presses start
3) JS writes parameters
4) JS starts sequencer
5) Sequencer copies parameters to variables

Now how do you handle 3) and 4). Just issue two mjsonrpc commands together? What then could happen is that 4) is executed before 3) and we get the garbage.
You have to do 3) and WAIT for the return ("then" in the JS promise), and only then issue 4) from there.

Stefan

I have been able to reproduce the problem only once. From what I see, it seems that the Variables ODB tree is not initialized properly from the Param tree. Below are the messages from the failed run compared to a successful one. As far as I could see, the javascript code does not change anything in the Variables ODB tree (only monitors it). The actual changes are done by the sequencer program, or am I wrong?

Failed run:
16:14:25.849 2024/05/03 [Sequencer,INFO]  + 3 * 
16:14:24.722 2024/05/03 [Sequencer,INFO]  + 2 * 
16:14:23.594 2024/05/03 [Sequencer,INFO]  + 1 * 
16:14:23.592 2024/05/03 [Sequencer,INFO] Start of looping
16:14:23.591 2024/05/03 [Sequencer,INFO] (( - )/)
16:14:23.591 2024/05/03 [Sequencer,INFO] 
16:14:23.590 2024/05/03 [Sequencer,INFO] 
16:14:23.590 2024/05/03 [Sequencer,INFO] 
16:14:23.589 2024/05/03 [Sequencer,INFO] Parameters:
16:14:23.562 2024/05/03 [Sequencer,TALK] Sequencer started with script "testpars.msl".


Successful run:
16:15:37.472 2024/05/03 [Sequencer,INFO] 1.820000
16:15:37.471 2024/05/03 [Sequencer,INFO] Start of looping
16:15:37.471 2024/05/03 [Sequencer,INFO] 15
16:15:37.470 2024/05/03 [Sequencer,INFO] 0.020000
16:15:37.470 2024/05/03 [Sequencer,INFO] 2.100000
16:15:37.469 2024/05/03 [Sequencer,INFO] 1.800000
16:15:37.469 2024/05/03 [Sequencer,INFO] Parameters:
16:15:37.450 2024/05/03 [Sequencer,TALK] Sequencer started with script "testpars.msl".

The tinyexpr library I use to evaluate expressions does not support boolean operations. I would have to switch to the newer 
tineyexpr-plusplus version, which also has much richer functionality:

https://github.com/Blake-Madden/tinyexpr-plusplus/blob/tinyexpr%2B%2B/TinyExprChanges.md

Unfortunately it requires C++17, and at the moment we limit MIDAS to C++11, meaning we would break this requirement. I 
believe at the moment there are still some experiments (mainly at TRIUMF) which are stuck to older OS and therefore cannot 
switch to C++17, but hopefully this will change over time.

Stefan

Hello there, 
in our setup we use many variables with many different exceptions. Would it be possible to implement something like an 
IF or/and IF statement? I believe that this is currently not possible.
Best regards, 
Thomas Senger

It is pretty much the same as Stefan, I attach here the screenshots. Also in my case it works sometimes, and sometimes partially (one or 2 params, like in 
attachment 3).

> Could you please export and send me the /Sequencer ODB tree (or just /Sequencer/Param and /Sequencer/Variables) in both cases while the sequence is running. 
> 
> thanks,
> Zaher
> 
> 
> > Good afternoon,
> > 
> > After updating Midas to the latest develop commit 
> > (0f5436d901a1dfaf6da2b94e2d87f870e3611cf1) we found out a bug when starting 
> > sequencer. If we have a simple loop from start value to stop value and step 
> > size, just printing the value at each iteration, we see everything good (see 
> > first attachment). Then we included another script though, which contains 
> > several subroutines we defined for our detector, and we try to run the same 
> > script. Unfortunately after this the parameters seem uninitialized, and the 
> > value at each loop does not make sense (see second attachment). Also, sometimes 
> > when pressing run the set parameter window would pop-up, but sometimes not.
> > 
> > The script is this one:
> > 
> > >>>
> > COMMENT Test script to check for a specific bug
> > 
> > INCLUDE global_basic_functions
> > 
> > #CALL setup_paths
> > #CALL generate_DUT_params
> > 
> > PARAM lv_start, "Start of LV", 1.8
> > PARAM lv_stop, "Stop of LV", 2.1
> > PARAM lv_step, "Step of LV", 0.02
> > 
> > n_iterations = (($lv_stop - $lv_start)/$lv_step)
> > 
> > MSG "Parameters:"
> > MSG $lv_start
> > MSG $lv_stop
> > MSG $lv_step
> > MSG $n_iterations
> > 
> > MSG "Start of looping"
> > 
> > LOOP n, $n_iterations
> >    lv_now = $lv_start + $n * $lv_step
> >    MSG $lv_now
> >    WAIT SECONDS, 1
> > ENDLOOP
> > <<<
> > 
> > and the only difference comes from commenting the line:
> > 
> > >>>
> > INCLUDE global_basic_functions
> > <<<
> > 
> > as global_basic_functions is defined as a LIBRARY and it includes 75 (!) 
> > subroutines...
> > 
> > Is it possible that when loading a large script it messes up the loading of 
> > parameters?
> > 
> > Thank you very much,
> > Regards,
> > Luigi.

Ok, here is the complete code to reproduce the problem. Load parameter_test.msl which includes functions.msl. From the screenshot you see the variables containing 
garbage, and you also see that from the ODB screenshot. For completeness, I added Sequencer.json which contains the whole sequencer tree.

The interesting thing is that this works sometimes, and sometimes not. I'm not sure if this in the GUI or in the sequencer program, so we have to sort out who can 
fix it ;-)

Best,
Stefan

Could you please export and send me the /Sequencer ODB tree (or just /Sequencer/Param and /Sequencer/Variables) in both cases while the sequence is running. 

thanks,
Zaher


> Good afternoon,
> 
> After updating Midas to the latest develop commit 
> (0f5436d901a1dfaf6da2b94e2d87f870e3611cf1) we found out a bug when starting 
> sequencer. If we have a simple loop from start value to stop value and step 
> size, just printing the value at each iteration, we see everything good (see 
> first attachment). Then we included another script though, which contains 
> several subroutines we defined for our detector, and we try to run the same 
> script. Unfortunately after this the parameters seem uninitialized, and the 
> value at each loop does not make sense (see second attachment). Also, sometimes 
> when pressing run the set parameter window would pop-up, but sometimes not.
> 
> The script is this one:
> 
> >>>
> COMMENT Test script to check for a specific bug
> 
> INCLUDE global_basic_functions
> 
> #CALL setup_paths
> #CALL generate_DUT_params
> 
> PARAM lv_start, "Start of LV", 1.8
> PARAM lv_stop, "Stop of LV", 2.1
> PARAM lv_step, "Step of LV", 0.02
> 
> n_iterations = (($lv_stop - $lv_start)/$lv_step)
> 
> MSG "Parameters:"
> MSG $lv_start
> MSG $lv_stop
> MSG $lv_step
> MSG $n_iterations
> 
> MSG "Start of looping"
> 
> LOOP n, $n_iterations
>    lv_now = $lv_start + $n * $lv_step
>    MSG $lv_now
>    WAIT SECONDS, 1
> ENDLOOP
> <<<
> 
> and the only difference comes from commenting the line:
> 
> >>>
> INCLUDE global_basic_functions
> <<<
> 
> as global_basic_functions is defined as a LIBRARY and it includes 75 (!) 
> subroutines...
> 
> Is it possible that when loading a large script it messes up the loading of 
> parameters?
> 
> Thank you very much,
> Regards,
> Luigi.

> Ok, I implemented the float second wait function. Internally it works in ms, so the maximum resolution is 0.001 s.
> 
> Best,
> Stefan

Thank you, we will test this soon and let you know if we see any issues (but we're not expecting any).