 15 Apr 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
>
> I shall check on the use of MAX_STRING_LENGTH at least in odb itself...
>
|
|
15 Apr 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> >
> > I shall check on the use of MAX_STRING_LENGTH at least in odb itself...
> >
|
|
19 Apr 2017, Stefan Ritt, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
ODB name lengths (the name of a key) are limited to 256 characters, the length of strings in the ODB should NOT be limited. At some point we wanted to have
complete web pages inside the ODB,
which for sure are longer than 256 characters. While this was the idea, I see now that db_paste & co. is hopelessly broken. To fix it, everything should |
|
19 Apr 2017, Stefan Ritt, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> Fixed a small buglet, now saving and reloading odb in the old ".odb" format will silently truncate all overlong strings to 256 bytes. (I think it always
did that).
|
|
22 Apr 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> > Fixed a small buglet, now saving and reloading odb in the old ".odb" format will silently truncate all overlong strings to 256 bytes. (I think it always
did that).
>
|
|
22 Apr 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> ODB name lengths (the name of a key) are limited to 256 characters, the length of strings in the ODB should NOT be limited.
Right, I was not ever aware of such limitation until I just now looked at the .odb and .xml writing code. Definitely string length
|
|
06 Jun 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> ... the xml reader, probably has same problem
> ... xml writer truncates long strings via truncation in db_sprintf()
|
 24 Jul 2015, Konstantin Olchanski, Info, MAX_EVENT_SIZE removed
|
The define for MAX_EVENT_SIZE was removed from midas.h.
Replacing it is DEFAULT_MAX_EVENT_SIZE set to 4 MiBytes and DEFAULT_BUFFER_SIZE
|
|
05 Jan 2021, Isaac Labrie Boulay, Bug Report, Logger: Disk nearly full.
|
Hi all,
I've ran into a problem where my experiment gets interrupted with a message from
|
|
06 Jan 2021, Stefan Ritt, Bug Report, Logger: Disk nearly full.
|
The logger simple requests the disk free space level from the operating system in the same
way as the "df" command does. Can you do a "df" on your system? I have seen that some file
systems free up space not immediately if you delete files, but some times later (like 24h).
|
|
06 Jan 2021, Isaac Labrie Boulay, Bug Report, Logger: Disk nearly full.
|
> The logger simple requests the disk free space level from the operating system in the same
> way as the "df" command does. Can you do a "df" on your system? I have seen that some file
> systems free up space not immediately if you delete files, but some times later (like 24h).
|
|
25 Oct 2021, Francesco Renga, Forum, Logger crash
|
Hello,
I'm experiencing crashes of the mlogger program on the time scale of a couple
of days. The only messages from MIDAS are:
|
|
25 Oct 2021, Stefan Ritt, Forum, Logger crash
|
The short term solution would be to increase the logger timeout in the ODB under
/Programs/Logger/Watchdog timeout
|
|
12 May 2020, Ruslan Podviianiuk, Forum, List of sequencer files
|
Hello,
We are going to implement a list of sequencer files to allow users to select one
|
13 May 2020, Stefan Ritt, Forum, List of sequencer files 
|
If you load a file into the sequencer from the web interface, you get a list of all files in that directory.
This basically gives you a list of possible sequencer files. It's even more powerful, since you can
create subdirectories and thus group the sequencer files. Attached an example from our
|
|
18 May 2020, Ruslan Podviianiuk, Forum, List of sequencer files
|
> If you load a file into the sequencer from the web interface, you get a list of all files in that directory.
> This basically gives you a list of possible sequencer files. It's even more powerful, since you can
> create subdirectories and thus group the sequencer files. Attached an example from our
|
|
19 May 2020, Ruslan Podviianiuk, Forum, List of sequencer files
|
> If you load a file into the sequencer from the web interface, you get a list of all files in that directory.
> This basically gives you a list of possible sequencer files. It's even more powerful, since you can
> create subdirectories and thus group the sequencer files. Attached an example from our
|
|
20 May 2020, Konstantin Olchanski, Forum, List of sequencer files
|
>
> We have a custom webpage and trying to get list of files from the custom webpage and need jrpc command to show it
> in custom page. Is there a jrpc command to get this file list?
|
|
28 Jun 2004, Exaos Lee, , Linking Error: g++ -rpath?
|
I cannot checkout from the cvs server. So I download each latest file from the WWW
interface of CVS. While compiling these files, I encountered the following problems:
-------------
|
|
28 Jun 2004, Konstantin Olchanski, , Linking Error: g++ -rpath?
|
> ld: unknown flag: -rpath
> gmake: *** [darwin/bin/mlogger] Error 1
|