So there is no error on run start anymore? To debug the stuck run stop, please use "stop -v" 
to see where it got stuck. You can also play with the RPC timeouts (the connect timeout and 
the response timeout), to make it get "unstuck" quicker. Definitely it should not be stuck 
forever, it should timeout at maximum of "rpc timeout * number of clients". K.O.

> BTW, for production use I recommend midas from the "release" branches, unless one 
> needs a bug fix or new feature from the development branch.

Fair point. I would suggest adding that recommendation to the wiki instructions. I 
forget to add that step otherwise.

> So there is no error on run start anymore? To debug the stuck run stop, please use "stop -v" 
> to see where it got stuck. You can also play with the RPC timeouts (the connect timeout and 
> the response timeout), to make it get "unstuck" quicker. Definitely it should not be stuck 
> forever, it should timeout at maximum of "rpc timeout * number of clients". K.O.

You're right it does not stay stuck forever, it eventually gets unstuck. I forgot to mention this. 
I will try to play with these timeout parameters. It does not get stuck if I run my DAQ using the 
odbedit commands (start/stop). I don't know if this is relevant information that could help us 
identify the problem.

Thanks for all your help as always!

Isaac

> It does not get stuck if I run my DAQ using the odbedit commands (start/stop).

Interesting. Run start/stop from odbedit works but from mhttpd gets stuck.

I think they do not run the transition quite the same way. mhttpd uses the multithreaded transition.

So we can debug this using the "mtransition" program. Try:

- mtransition -v -d 1 START/STOP -- this should be same as odbedit
- mtransition -m -v -d 1 START/STOP -- this should be same as mhttpd

The "-v" and "-d 1" flags should cause lots of output, for failed transitions,
cut-and-paste it all into this elog here, should give us plenty of meat to debug.

K.O.

Hello!

Could you help me solve the problem of compatibility between our frontend (created in 2017) and the fresh MIDAS? The old MIDAS (2017) worked well, then we did not use it.
While compiling the frontend, I get a lot of warnings and a few compilation errors.

Any help will be greatly appreciated.

Thanks in advance.
With the best regards,
Svetlana

Version: release/midas-2020-12

I'm exporting the history data shown in elog:2132/1 to CSV, but when I look at the 
CSV data, the step no longer occurs at the same time in both data sets (elog:2132/2)

History is from two separate equipments/frontends, but both have "Log history" set to 1.

Tried with export of two different time ranges, and the shift appears to remain the same, 
about 4040 rows.

I confirm there is a problem. If variables are from the same equipment, they have the same 
time stamps, like

t1 v1(t1) v2(t1)
t2 v1(t2) v2(t2)
t3 v1(t3) v2(t3)

when they are from different equipments, they have however different time stamps

t1 v1(t1)
t2    v2(t2)
t3 v1(t3)
t4    v2(t4)

The bug in the current code is that all variables use the time stamps of the first variable, 
which is wrong in the case of different equipments, like

t1 v1(t1) v2(*t2*)
t3 v1(t3) v2(*t4*)

So I can change the code, but I'm not sure what would be the bast way. The easiest would be to 
export one array per variable, like

t1 v1(t1)
t2 v1(t2)
...
t3 v2(t3)
t4 v2(t4)
...

Putting that into a single array would leave gaps, like

t1 v1(t1) [gap]
t2 [gap]  v2(t2)
t3 v1(t3) [gap]
t4 [ga]]  v2(t4)

plus this is programmatically more complicated, since I have to merge two arrays. So which 
export format would you prefer?

Stefan

I think from my perspective the separate files are fine. I personally don't really like the format 
with the gaps, so don't see an advantage in putting in the extra work.
I'm surprised the shift is this big, though, it was more than a whole hour in my case, is it the 
time difference between when the frontends were started?

Version: release/midas-2020-12

In the new history display, the checkbox "Change all time axes together" works 
well with the mouse-based zoom, but does not apply to the +- buttons.

I finally found some time to fix this issue in the latest commit. Please update and check if it's 
working for you.

Stefan

> Version: release/midas-2020-12
> 
> In the new history display, the checkbox "Change all time axes together" works 
> well with the mouse-based zoom, but does not apply to the +- buttons.

Fixed in current commit.

Stefan

It seems that a modbselect triggers a "change" in an ODB which has a hot link. This happens onload (or whenever the custom page is reloaded) and otherwise it behaves as expected, i.e. no change unless the modbselect is actually changed. Is this the intended behaviour? can this be modified?

Thanks for reporting that bug, I fixed it in the last commit.

Stefan

Hi,

Using midas version 12-2020,  I am trying to run mhttpd from within a docker container using docker-compose.
Starting from an empty ODB, I simply run `mhttpd` and this is the output I have:
midas_hatfe_1  | <Warning> Starting mhttpd...
midas_hatfe_1  | [mhttpd,INFO] ODB subtree /Runinfo corrected successfully
midas_hatfe_1  | MVOdb::SetMidasStatus: Error: MIDAS db_find_key() at ODB path "/WebServer/Host list" returned status 312
midas_hatfe_1  | Mongoose web server will not use password protection
midas_hatfe_1  | Mongoose web server will not use the hostlist, connections from anywhere will be accepted
midas_hatfe_1  | Mongoose web server listening on http address "localhost:8080", passwords OFF, hostlist OFF
midas_hatfe_1  | [mhttpd,ERROR] [mhttpd.cxx:19160:mongoose_listen,ERROR] Cannot mg_bind address "[::1]:8080"

According to the documentation, the WebServer tree should be created automatically when starting the mhttpd; but it seems not as it doesn't find the entry "/WebServer/Host list".
If I create it by end (using "create STRING /WebServer/Host list"), I still get the error message that mhttpd didn't bind properly to the local port 8080.
I am not sure what it wrong, as mhttpd is working perfectly well in this exact container for midas 03-2020.

Any idea what difference makes it not possible anymore to run into these container?

Thanks very much for your help.
Cheers
Mathieu

> midas_hatfe_1  | Mongoose web server listening on http address "localhost:8080", passwords OFF, hostlist OFF
> midas_hatfe_1  | [mhttpd,ERROR] [mhttpd.cxx:19160:mongoose_listen,ERROR] Cannot mg_bind address "[::1]:8080"

It looks like mhttpd managed to bind to the IPv4 address (localhost), but not the IPv6 address (::1). If you don't need it, try setting "/Webserver/Enable IPv6" to false.

> It looks like mhttpd managed to bind to the IPv4 address (localhost), but not the IPv6 address (::1). If you don't need it, try setting "/Webserver/Enable IPv6" to false.

We had this issue already several times. This info should be put into the documentation at a prominent location.

Stefan

OS: OSX 10.14.6 Mojave
MIDAS: Downloaded from repo on April 2021.

I have a slow control frontend doing the command/readout of a MPOD HV/LV. Since I am reading out the current that are in nA (after updating snmp), I wanted to multiply the number by 1e9.

I noticed the new "Formula" field (introduced in 2019 it seems) instead of the "Factor/Offset" I was used to. None of my entries seems to be accepted (after hitting save, when coming back thee field is empty).

Looking in ODB in "/History/Display/MPOD/HV (Current)/", the field "Formula" is a string of size 32 (even if I have multiple plots in that display). I noticed that the fields "Factor" and "Offset" are still existing and they are arrays with the correct size. However, changing the values does not seem to do anything.

Deleting "Formula" by hand and creating a new field as an array of string (of correct length) seems to do the trick: the formula is displayed in the History display config, and correctly used.

> > It looks like mhttpd managed to bind to the IPv4 address (localhost), but not the IPv6 address (::1). If you don't need it, try setting "/Webserver/Enable IPv6" to false.
> 
> We had this issue already several times. This info should be put into the documentation at a prominent location.
> 
> Stefan

Thanks a lot, this solved my issue!