 01 Sep 2006, pohl, Forum, Hytec 5331 CAMAC kernel 2.6 driver problem
|
Grüezi,
I am new to this list.
|
|
11 Feb 2014, Randolf Pohl, Forum, Huge events (>10MB) every second or so
|
I'm looking into using MIDAS for an experiment that creates one large event
(20MB or more) every second.
|
 11 Feb 2014, Stefan Ritt, Forum, Huge events (>10MB) every second or so
|
> I'm looking into using MIDAS for an experiment that creates one large event
> (20MB or more) every second.
>
|
|
18 Feb 2014, Konstantin Olchanski, Forum, Huge events (>10MB) every second or so
|
> I'm looking into using MIDAS for an experiment that creates one large event
> (20MB or more) every second.
|
01 Mar 2014, Randolf Pohl, Forum, Huge events (>10MB) every second or so 
|
Works, and here is how I did it. The attached example is based on the standard MIDAS
example in "src/midas/examples/experiment".
|
|
01 Mar 2014, Stefan Ritt, Forum, Huge events (>10MB) every second or so
|
> Works, and here is how I did it. The attached example is based on the standard MIDAS
> example in "src/midas/examples/experiment".
|
|
08 Apr 2010, Exaos Lee, Forum, How to stop a run with a timer?
|
I want to let the run stop and start periodically. But I looked through the ODB
and didn't find anything may help. I also checked the FAQ online and didn't find
answer either. Who can help me? Thank you. |
|
22 Apr 2010, Jimmy Ngai, Forum, How to stop a run with a timer?
|
Hi Exaos,
This may help: https://ladd00.triumf.ca/elog/Midas/645
|
|
05 Nov 2024, Jack Carlton, Forum, How to properly write a client listens for events on a given buffer?
|
If there's some template for writing a client to access event data, that would be
very useful (and you can probably just ignore the context I gave below in that
case).
|
|
05 Nov 2024, Maia Henriksson-Ward, Forum, How to properly write a client listens for events on a given buffer?
|
> If there's some template for writing a client to access event data, that would be
> very useful (and you can probably just ignore the context I gave below in that
> case).
|
|
03 Aug 2009, Exaos Lee, Forum, How to distinguish the status and value returned from "mvme_read_value(...)"
|
The definition of mvme_read_value is as the following:
[CODE]unsigned int EXPRT mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
|
|
03 Aug 2009, Stefan Ritt, Forum, How to distinguish the status and value returned from "mvme_read_value(...)"
|
[quote="Exaos Lee"]The definition of mvme_read_value is as the following:
[CODE]unsigned int EXPRT mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
|
|
03 Aug 2009, Konstantin Olchanski, Forum, How to distinguish the status and value returned from "mvme_read_value(...)"
|
> uint32_t mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
> Question: How to distinguish the status and value returned?
|
|
13 Jan 2020, Konstantin Olchanski, Info, How to convert C midas frontends to C++, CAEN libraries
|
Big thanks to Peter Kunz - specifically when using the CAEN libraries:
>
|
|
25 Jul 2019, Frederik Wauters, Forum, How to convert C midas frontends to C++ (my problem solved)
|
Ok, so the detail that I missed was that the dummy functions
|
|
30 Jul 2019, Stefan Ritt, Forum, How to convert C midas frontends to C++ (my problem solved)
|
> as a side comment, not all drivers are c++ compatible yet (e.g. mscbvr), so changes needed are small
Right. We recently switched the whole midas to c++, but we could not cover all drivers. Most of them just need some type
|
|
01 Aug 2019, Stefan Ritt, Forum, How to convert C midas frontends to C++ (my problem solved)
|
>
> Ok, so the detail that I missed was that the dummy functions
>
|
|
30 Apr 2019, Konstantin Olchanski, Info, How to convert C midas frontends to C++
|
To convert a MIDAS frontend to C++ follow this checklist:
a) add #include "mfe.h" after include of midas.h and fix all compilation errors.
|
|
05 Jun 2019, Konstantin Olchanski, Info, How to convert C midas frontends to C++
|
> To convert a MIDAS frontend to C++ follow this checklist:
Pierre A.-A. reminded me that include files for CAEN libraries have to
|
|
23 Jul 2019, Frederik Wauters, Forum, How to convert C midas frontends to C++
|
I am moving our fe code to c++ midas with cmake. I did encounter your a) problems.
How do I solve mismatched declarations in the mfe (or other places in the midas code)? It is having issues with the midas defined BOOL/... types. This |