 24 Dec 2005, Stefan Ritt, Bug Report, minor changes to run transition code
|
> I am now considering allowing the run to end even if some clients cannot be
> contacted. The begin, pause and resume transitions would continue to fail if
> clients cannot be contacted.
|
 02 Sep 2003, Pierre-André Amaudruz, , minor fix, window build
|
- makefile.nt (/examples/experiment, /hbook)
adjusted for local hmana.obj build as for rmana.obj, add cvs tag for
revision comment entry.
|
|
19 Aug 2003, Pierre-André Amaudruz, , minor fixes, new tarball 1.9.3-1
|
- add pthread lib to examples/... makefile
- fix ybos_simfe.c for max_event_size
- fix camacnul.c for cam_inhibit_test(), cam_interrupt_test()
|
|
10 Aug 2009, Konstantin Olchanski, Info, misc changes from PIENU and T2K
|
FYI - committed the last changes from TRIUMF DAQ systems for PIENU and T2K/ND280 FGD and TPC
tests:
|
|
10 Aug 2009, Konstantin Olchanski, Info, misc changes from PIENU and T2K
|
> FYI - committed the last changes from TRIUMF DAQ systems for PIENU and T2K/ND280 FGD and TPC
> tests:
> svn rev 4541
|
|
14 Dec 2005, Konstantin Olchanski, Bug Report, misc problems
|
I would like to document a few problems I ran into while setting up a new
experiment (two USB interfaces to Alice TPC electronics, plus maybe a USB
interface to CAMAC). I am using a midas cvs checkout from last October, so I am
|
|
26 Sep 2023, Stefan Ritt, Info, mjsonrpc_db_save / mjsonrpc_db_load have been dropped
|
The JavaScript function
mjsonrpc_db_save / mjonrpc_db_load
|
|
14 Sep 2013, Konstantin Olchanski, Info, mktime() and daylight savings time
|
I would like to share with you a silly problem with mktime() and daylight savings time (Summer
time/Winter time) that I have run into while working on the mhttpd history query page.
|
|
24 Sep 2013, Stefan Ritt, Info, mktime() and daylight savings time
|
I vaguely remember that I had a similar problem with ELOG. The solution was to call tzset() at the beginning of the program. The man page says that
this function is called automatically by programs using time zones, but apparently it is not. Can you try that? There is also the TZ environment
variable and /etc/localtime. I never understood the details, but playing with these things can influence mktime() and localtime().
|
|
24 Sep 2013, Konstantin Olchanski, Info, mktime() and daylight savings time
|
> I vaguely remember that I had a similar problem with ELOG. The solution was to call tzset() at the beginning of the program. The man page says that
> this function is called automatically by programs using time zones, but apparently it is not. Can you try that? There is also the TZ environment
> variable and /etc/localtime. I never understood the details, but playing with these things can influence mktime() and localtime().
|
|
24 Sep 2013, Stefan Ritt, Info, mktime() and daylight savings time
|
> > I vaguely remember that I had a similar problem with ELOG. The solution was to call tzset() at the beginning of the program. The man page says that
> > this function is called automatically by programs using time zones, but apparently it is not. Can you try that? There is also the TZ environment
|
|
24 Sep 2013, Stefan Ritt, Info, mktime() and daylight savings time
|
> > > I vaguely remember that I had a similar problem with ELOG. The solution was to call tzset() at the beginning of the program. The man page says that
> > > this function is called automatically by programs using time zones, but apparently it is not. Can you try that? There is also the TZ environment |
|
17 Oct 2008, Konstantin Olchanski, Info, mlogger async transitions, etc
|
As we were looking into problems with starting and stopping runs in one of our
daq systems, we found that the mlogger does something differently compared to
mhttpd and odbedit. Starting and stopping runs from mhttpd and odbedit works
|
|
18 Oct 2008, Stefan Ritt, Info, mlogger async transitions, etc
|
> I suspect mlogger uses ASYNC transactions exactly to avoid
> this type of deadlock (mlogger used ASYNC transactions since svn revision 2, the
> beginning of time).
|
|
31 Aug 2004, Konstantin Olchanski, , mlogger crash if using mserver.
|
Our users keep making a simple mistake- they set MIDAS_SERVER_HOST in their
environement. Most midas programs do not mind this- they go through the
mserver, inefficient but benign- except for the mlogger, which dumps core
|
|
07 Sep 2004, Stefan Ritt, , mlogger crash if using mserver.
|
I trapped myself into that problem recently so it's the right time to fix it (;-).
We have two options:
|
|
15 Sep 2004, Konstantin Olchanski, , mlogger crash if using mserver.
|
> I trapped myself into that problem recently so it's the right time to fix it (;-).
> We have two options:
> a) Make the logger work remotely, even if it's suboptimal and
|
|
13 Nov 2023, Ivo Schulthess, Forum, mlogger does not HAVE_ROOT
|
Good evening,
I am setting up Midas (v2.1) for a new experiment. We want to save the data in the ROOT format. We installed ROOT from source (v6.28/06), and ROOTSYS is |
|
13 Nov 2023, Konstantin Olchanski, Forum, mlogger does not HAVE_ROOT
|
> I am setting up Midas (v2.1) for a new experiment. We want to save the data in the ROOT format. We installed ROOT from source (v6.28/06), and ROOTSYS
is set. When we compile Midas, it says that it found ROOT. We set up a second logger channel where we set the filename to run%05d.root, the format to ROOT,
and the output to ROOT. Nevertheless, when starting a run, the logger writes the error that "channel '1' requested ROOT output, but mlogger is built without |
|
13 Nov 2023, Stefan Ritt, Forum, mlogger does not HAVE_ROOT
|
When you do "cmake .." in the build directory, you will see
-- MIDAS: Found ROOT version xxx in yyy
|