 15 Apr 2024, Konstantin Olchanski, Bug Report, open MIDAS RPC ports
|
we had a bit of trouble with open network ports recently and I now think security of MIDAS RPC
ports needs to be tightened.
|
 15 Apr 2024, Stefan Ritt, Bug Report, open MIDAS RPC ports
|
One thing coming to my mind is the interface binding. If you have a midas host with two networks
("global" and "local"=192.168.x.x), you can tell to which interface a socket should bind.
By default it binds both interfaces, but we could restrict the socket only to bind to the local
|
|
22 Oct 2004, Konstantin Olchanski, Bug Fix, mhttpd message colouring
|
I commited a fix to mhttpd logic that decides which messages should be shown in
"red" colour- before, any message with square brackets and colons would be
highlighted in red. Now only messages matching the pattern [...:...] are
|
|
09 Nov 2004, Pierre-Andre Amaudruz, Bug Fix, New transition scheme
|
Problem:
If cm_set_transition_sequence() is used for changing the sequence number, the
command odbedit> start/stop/resume/pause -v report the propre sequence but the
|
|
25 Feb 2005, Konstantin Olchanski, Bug Fix, fixed: double free in FORMAT_MIDAS ybos.c causing lazylogger crashes
|
We stumbled upon and fixed a "double free" bug in src/ybos.c causing crashes in
lazylogger writing .mid files in the FORMAT_MIDAS format (why does it use
ybos.c? Pierre says- for generic file i/o). Why this code had ever worked before
|
|
05 May 2005, Konstantin Olchanski, Bug Fix, fix: minor bit rot in the example experiment
|
I fixed some minor bit rot in the example experiment: a few minor Makefile
problems, make the analyzer use the current histogram creation macros, etc. I
also added startup and shutdown scripts. These will be documented as we work
|
|
02 Aug 2005, Konstantin Olchanski, Bug Fix, fix odb corruption when running analzer for the first time
|
I have been plagued by ODB corruption when I run the analyzer for the first time
after setting up the new experiment. Some time ago, I traced this to
mana.c::book_ttree() and now I found and fixed the bug, fix now commited to
|
|
18 Aug 2005, Konstantin Olchanski, Bug Fix, fix race condition between clients on run start/stop, pause/resume
|
It turns out that the new priority sequencing of run state transitions had a
flaw: the frontends, the analyzer and the logger all registered at priority 500
and were invoked in essentially a random order. For example the frontend could
|
|
01 Sep 2005, Stefan Ritt, Bug Fix, fix race condition between clients on run start/stop, pause/resume
|
> It turns out that the new priority sequencing of run state transitions had a
> flaw: the frontends, the analyzer and the logger all registered at priority 500
> and were invoked in essentially a random order. For example the frontend could
|
|
17 Oct 2005, Exaos Lee, Bug Fix, "make install" error under MacOS X
|
Under MacOS X, "make install" will cours an error like this:
[code]
...
|
|
23 Nov 2005, Stefan Ritt, Bug Fix, Endian swapping in mana.c
|
It was reported that following code in mana.c :
[code]
|
|
07 May 2006, Konstantin Olchanski, Bug Fix, Update & add VME drivers
|
I commited fixes for a few minor compilation errors in the VME drivers
(vmicvme.c, etc)
I also added new drivers for the v513 latch and v560 scaler that I wrote for
|
|
18 May 2006, Konstantin Olchanski, Bug Fix, removed a few "//" comments to fix compilation on VxWorks
|
Our VxWorks C compiler (gcc-2.8-something) does not like the "//" comments. Luckily, on VxWorks, we
only compile a small subset of midas, so there is no point in banning all "//" comments. But I did have to
convert a couple of them to /* commens */ in odb.c to make it compile. Changes to odb.c commited. K.O. |
|
18 May 2006, Stefan Ritt, Bug Fix, Fixed problems with reload of custom pages
|
We had a problem with custom pages and reloading of them. If they contain an ODB field which is editable, one can change the ODB value through the custom
page. The URL then contains a "?cmd=Set&value=x&index=x" section, which stays in the browser's address bar after the ODB value has been updated. If the
value changes later by some other means in the ODB, and one presses "reload" in the browser, the above URL gets executed again and the value gets changed |
|
25 May 2006, Konstantin Olchanski, Bug Fix, fix crash in xml odb load
|
There is a crash in odbedit when loading some xml odb files: a missing check for NULL pointer when
loading an array of strings and one of the array elements is blank. This check is present when loading
other string values. Here is the diff:
|
|
25 May 2006, Stefan Ritt, Bug Fix, Fixed compiler warnings with gcc 3.4.4
|
I fixed a couple of compiler warning which came up with the new gcc 3.4.4. Seems like the compiler gets more and more picky. There a still warning left
in ybos.c and in mcnaf.c, which I leave to the original author ;) |
|
25 May 2006, Pierre-Andre Amaudruz, Bug Fix, Fixed compiler warnings with gcc 3.4.4
|
[quote="Stefan Ritt"]I fixed a couple of compiler warning which came up with the new gcc 3.4.4. Seems like the compiler gets more and more picky. There
a still warning left in ybos.c and in mcnaf.c, which I leave to the original author ;)[/quote]
|
|
31 May 2006, Konstantin Olchanski, Bug Fix, mhist could not look at array data
|
When using mhist interactively, I could not look at array data:
1) if the array is the only variable, the question "what array index to use?"
was not asked, zero was assumed,
|
|
08 Jun 2006, Konstantin Olchanski, Bug Fix, fix compilation of musbstd.h, add it back to libmidas
|
I fixed the compilation of musbstd.h (it required -DHAVE_LIBUSB on Linux, but
nothing knew about defining it) and put musbstd.o back into libmidas (USB
support should be part of the standard base midas library). K.O. |
|
08 Jun 2006, Konstantin Olchanski, Bug Fix, commit latest ccusb.c CAMAC-USB driver
|
I commited the latest driver for the Wiener CCUSB USB-CAMAC driver. It
implements all functions from mcstd.h and has been tested to be plug-compatible
with at least one of our CAMAC frontends. K.O. |