 03 May 2024, Luigi Vigani, Bug Report, Params not initialized when starting sequencer 
|
It is pretty much the same as Stefan, I attach here the screenshots. Also in my case it works sometimes, and sometimes partially (one or 2 params, like
in
attachment 3).
|
|
03 May 2024, Zaher Salman, Bug Report, Params not initialized when starting sequencer
|
I have been able to reproduce the problem only once. From what I see, it seems that the Variables ODB tree is not initialized properly from the Param tree.
Below are the messages from the failed run compared to a successful one. As far as I could see, the javascript code does not change anything in the Variables
ODB tree (only monitors it). The actual changes are done by the sequencer program, or am I wrong?
|
|
03 May 2024, Stefan Ritt, Bug Report, Params not initialized when starting sequencer
|
Ahh, that rings a bell:
1) JS opens start dialog box
|
|
03 May 2024, Zaher Salman, Bug Report, Params not initialized when starting sequencer
|
Thanks for the hint Stefan. I pushed a possible fix but I cannot test it since I cannot reproduce the issue.
> Ahh, that rings a bell:
|
|
03 May 2024, Stefan Ritt, Bug Report, Params not initialized when starting sequencer
|
Seems to me like the problem happens less frequently, but I still see it (1 out of 5 or so). The fact that /Sequencer/Params/Value is empty tells me that
the GUI
has the problem and not the sequencer side.
|
 22 Oct 2004, Konstantin Olchanski, Bug Fix, mhttpd message colouring
|
I commited a fix to mhttpd logic that decides which messages should be shown in
"red" colour- before, any message with square brackets and colons would be
highlighted in red. Now only messages matching the pattern [...:...] are
|
|
09 Nov 2004, Pierre-Andre Amaudruz, Bug Fix, New transition scheme
|
Problem:
If cm_set_transition_sequence() is used for changing the sequence number, the
command odbedit> start/stop/resume/pause -v report the propre sequence but the
|
|
25 Feb 2005, Konstantin Olchanski, Bug Fix, fixed: double free in FORMAT_MIDAS ybos.c causing lazylogger crashes
|
We stumbled upon and fixed a "double free" bug in src/ybos.c causing crashes in
lazylogger writing .mid files in the FORMAT_MIDAS format (why does it use
ybos.c? Pierre says- for generic file i/o). Why this code had ever worked before
|
|
05 May 2005, Konstantin Olchanski, Bug Fix, fix: minor bit rot in the example experiment
|
I fixed some minor bit rot in the example experiment: a few minor Makefile
problems, make the analyzer use the current histogram creation macros, etc. I
also added startup and shutdown scripts. These will be documented as we work
|
|
02 Aug 2005, Konstantin Olchanski, Bug Fix, fix odb corruption when running analzer for the first time
|
I have been plagued by ODB corruption when I run the analyzer for the first time
after setting up the new experiment. Some time ago, I traced this to
mana.c::book_ttree() and now I found and fixed the bug, fix now commited to
|
|
18 Aug 2005, Konstantin Olchanski, Bug Fix, fix race condition between clients on run start/stop, pause/resume
|
It turns out that the new priority sequencing of run state transitions had a
flaw: the frontends, the analyzer and the logger all registered at priority 500
and were invoked in essentially a random order. For example the frontend could
|
|
01 Sep 2005, Stefan Ritt, Bug Fix, fix race condition between clients on run start/stop, pause/resume
|
> It turns out that the new priority sequencing of run state transitions had a
> flaw: the frontends, the analyzer and the logger all registered at priority 500
> and were invoked in essentially a random order. For example the frontend could
|
|
17 Oct 2005, Exaos Lee, Bug Fix, "make install" error under MacOS X
|
Under MacOS X, "make install" will cours an error like this:
[code]
...
|
|
23 Nov 2005, Stefan Ritt, Bug Fix, Endian swapping in mana.c
|
It was reported that following code in mana.c :
[code]
|
|
07 May 2006, Konstantin Olchanski, Bug Fix, Update & add VME drivers
|
I commited fixes for a few minor compilation errors in the VME drivers
(vmicvme.c, etc)
I also added new drivers for the v513 latch and v560 scaler that I wrote for
|
|
18 May 2006, Konstantin Olchanski, Bug Fix, removed a few "//" comments to fix compilation on VxWorks
|
Our VxWorks C compiler (gcc-2.8-something) does not like the "//" comments. Luckily, on VxWorks, we
only compile a small subset of midas, so there is no point in banning all "//" comments. But I did have to
convert a couple of them to /* commens */ in odb.c to make it compile. Changes to odb.c commited. K.O. |
|
18 May 2006, Stefan Ritt, Bug Fix, Fixed problems with reload of custom pages
|
We had a problem with custom pages and reloading of them. If they contain an ODB field which is editable, one can change the ODB value through the custom
page. The URL then contains a "?cmd=Set&value=x&index=x" section, which stays in the browser's address bar after the ODB value has been updated. If the
value changes later by some other means in the ODB, and one presses "reload" in the browser, the above URL gets executed again and the value gets changed |
|
25 May 2006, Konstantin Olchanski, Bug Fix, fix crash in xml odb load
|
There is a crash in odbedit when loading some xml odb files: a missing check for NULL pointer when
loading an array of strings and one of the array elements is blank. This check is present when loading
other string values. Here is the diff:
|
|
25 May 2006, Stefan Ritt, Bug Fix, Fixed compiler warnings with gcc 3.4.4
|
I fixed a couple of compiler warning which came up with the new gcc 3.4.4. Seems like the compiler gets more and more picky. There a still warning left
in ybos.c and in mcnaf.c, which I leave to the original author ;) |
|
25 May 2006, Pierre-Andre Amaudruz, Bug Fix, Fixed compiler warnings with gcc 3.4.4
|
[quote="Stefan Ritt"]I fixed a couple of compiler warning which came up with the new gcc 3.4.4. Seems like the compiler gets more and more picky. There
a still warning left in ybos.c and in mcnaf.c, which I leave to the original author ;)[/quote]
|