Dear experts,
I am a new user of MIDAS. I try to follow the instruction from 
https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux
to install MIDAS in Fedora 39.

When I try to have a try in the section of "Clients run on Localhost only"
https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux#Clients_run_on_Localhost_only

I get the error of "undefined reference to" several variables in the mfe.cxx. For example the variable "max_event_size_frag". May I know any idea about this issue? Thank you.


Best,
Terry

I think this may only be an issue on the development branch.
Can you confirm that that is what you are using?

If so, I suggest you try the most recent stable tag 2022-05-c.

> Dear experts,
> I am a new user of MIDAS. I try to follow the instruction from 
> https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux
> to install MIDAS in Fedora 39.
> 
> When I try to have a try in the section of "Clients run on Localhost only"
> https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux#Clients_run_on_Localhost_only
> 
> I get the error of "undefined reference to" several variables in the mfe.cxx. For example the variable "max_event_size_frag". May I know any idea about this issue? Thank you.
> 
> 
> Best,
> Terry

I commited a fix to mhttpd logic that decides which messages should be shown in
"red" colour- before, any message with square brackets and colons would be
highlighted in red. Now only messages matching the pattern [...:...] are
highlighted. The decision logic was moved into a function message_red(). K.O.

Problem:
If cm_set_transition_sequence() is used for changing the sequence number, the 
command odbedit> start/stop/resume/pause -v report the propre sequence but the
action on the client side is actually not performed!

Fix:
Local transition table updated in midas.c (1.226)

Note:
The transition number under /system/clients/<pid>/transition...
is used internally. Changing it won't have any effect on the client action
if sequence number is not registered.

We stumbled upon and fixed a "double free" bug in src/ybos.c causing crashes in
lazylogger writing .mid files in the FORMAT_MIDAS format (why does it use
ybos.c? Pierre says- for generic file i/o). Why this code had ever worked before
remains a mystery. K.O.

I fixed some minor bit rot in the example experiment: a few minor Makefile
problems, make the analyzer use the current histogram creation macros, etc. I
also added startup and shutdown scripts. These will be documented as we work
through them with our Summer student. K.O.

I have been plagued by ODB corruption when I run the analyzer for the first time
after setting up the new experiment. Some time ago, I traced this to
mana.c::book_ttree() and now I found and fixed the bug, fix now commited to
midas cvs. In book_ttree(), db_find("/Analyzer/Bank switches") was returning an
error and setting hkey to zero. Then we called db_open_record() with hkey==0,
which cased ODB corruption later on. The normal db_validate_hkey() did not catch
this because it considers hkey==0 to be valid (when most likely it is not). K.O.

It turns out that the new priority sequencing of run state transitions had a
flaw: the frontends, the analyzer and the logger all registered at priority 500
and were invoked in essentially a random order. For example the frontend could
get a begin-run transition before the logger and so start sending data before
the logger opened the output file. Same for the analyzer and same for the end of
run. Also the sequencing for pause/resume run and begin/end run was different
when the two pairs ought to have identical sequencing.

I now commited changes to mana.c and mlogger.c changing their transition sequencing:

start and resume:
200 - logger (mlogger.c, no change)
300 - analyzer (mana.c, was 500)
500 - frontends (mfe.c, no change)

stop and pause:
500 - frontends (mfe.c, no change)
700 - analyzer (mana.c, was 500)
800 - mlogger (mlogger.c, was 500)

P.S. However, even after this change, the TRIUMF ISAC/Dragon experiment still
see an anomaly in the analyzer, where it receives data events after the
end-of-run transition.

K.O.

> It turns out that the new priority sequencing of run state transitions had a
> flaw: the frontends, the analyzer and the logger all registered at priority 500
> and were invoked in essentially a random order. For example the frontend could
> get a begin-run transition before the logger and so start sending data before
> the logger opened the output file. Same for the analyzer and same for the end of
> run. Also the sequencing for pause/resume run and begin/end run was different
> when the two pairs ought to have identical sequencing.
> 
> I now commited changes to mana.c and mlogger.c changing their transition sequencing:
> 
> start and resume:
> 200 - logger (mlogger.c, no change)
> 300 - analyzer (mana.c, was 500)
> 500 - frontends (mfe.c, no change)
> 
> stop and pause:
> 500 - frontends (mfe.c, no change)
> 700 - analyzer (mana.c, was 500)
> 800 - mlogger (mlogger.c, was 500)
> 
> P.S. However, even after this change, the TRIUMF ISAC/Dragon experiment still
> see an anomaly in the analyzer, where it receives data events after the
> end-of-run transition.
> 
> K.O.

Thanks for fixing that bug. It happend because during the implementatoin of the priority
sequencing we have up the pre/post tansition, which took care of the proper sequence
between the logger, frontend and analyzer. The way you modified the sequence is
absolutely correct. It is important to have >10 numbers "around" the frontends (like
450...550) in case one has an experiment with >10 frontends which need to make a
transition in a certain sequence (like the DANCE experiment in Los Alamos).

...
install: darwin/bin/dio: No such file or directory
make: *** [install] Error 71

404,405c404,405
< $(BIN_DIR)/mcnaf: $(UTL_DIR)/mcnaf.c $(DRV_DIR)/camac/camacrpc.c
<       $(CC) $(CFLAGS) $(OSFLAGS) -o $@ $(UTL_DIR)/mcnaf.c $(DRV_DIR)/camac/camacrpc.c $(LIB) $(LIBS)
---
> $(BIN_DIR)/mcnaf: $(UTL_DIR)/mcnaf.c $(DRV_DIR)/bus/camacrpc.c
>       $(CC) $(CFLAGS) $(OSFLAGS) -o $@ $(UTL_DIR)/mcnaf.c $(DRV_DIR)/bus/camacrpc.c $(LIB) $(LIBS)
438c438,439
<       @for i in mserver mhttpd odbedit mlogger ; \
---
> 
>       @for i in mserver mhttpd odbedit mlogger dio ; \
444,447d444
<       chmod +s $(SYSBIN_DIR)/mhttpd
< 
< ifeq ($(OSTYPE),linux)
<       install -v -m 755 $(BIN_DIR)/dio $(SYSBIN_DIR)
449c446
< endif
---
>       chmod +s $(SYSBIN_DIR)/mhttpd

  /* swap event header if in wrong format */
  if (pevent->serial_number > 0x1000000) {
     WORD_SWAP(&pevent->event_id);
     WORD_SWAP(&pevent->trigger_mask);
     DWORD_SWAP(&pevent->serial_number);
     DWORD_SWAP(&pevent->time_stamp);
     DWORD_SWAP(&pevent->data_size);
  }

  /* swap event header if in wrong format */
#ifdef SWAP_EVENTS
  WORD_SWAP(&pevent->event_id);
  WORD_SWAP(&pevent->trigger_mask);
  DWORD_SWAP(&pevent->serial_number);
  DWORD_SWAP(&pevent->time_stamp);
  DWORD_SWAP(&pevent->data_size);
#endif

I commited fixes for a few minor compilation errors in the VME drivers
(vmicvme.c, etc)
I also added new drivers for the v513 latch and v560 scaler that I wrote for
CERN-ALPHA.

(Maybe I should mention that we also have drivers for the SIS 3820 multiscaler,
the v895 VME discriminator and a few more modules. Will commit them as they mature).

K.O.