| ID |
Date |
Author |
Topic |
Subject |
|
754
|
30 Mar 2011 |
Exaos Lee | Forum | How large does "bank32" support? | Reading an FADC buffer often needs large buffer size, especially while several
FADCs work together. I want to know how large a bank32 can support. |
|
768
|
24 Jun 2011 |
Exaos Lee | Suggestion | Build MIDAS debian packages using autoconf/automake. | Here is my story. I deployed several Debian Linux boxes as the DAQ systems in our lab. But I feel it's boring to build and install midas and its related softwares (such as root) on each box. So I need a local debian software repository and put midas and its related packages in it. First of all, I need a midas debian package. After a week's study and searching, I finally finished the job. Hope you feel it useful.
All the work is attached as "daq-midas_deb.tar.gz". The detail is followed. I also created several debian packages. But it's too large to be uploaded. I havn't my own site accessible from internet. So, if you need the debian packages, please give me an accessible ftp or other similar service, then I can upload them to you.
First, I use autoconf/automake to rewrite the building system of MIDAS. You can check it this way:
1. Untar daq-midas_deb.tar.gz somewhere, assumming ~/Temp.
2. cd ~/Temp/daq-midas
3. svn co -r 5065 svn+ssh://svn@savannah.psi.ch/repos/meg/midas/trunk midas
4. svn co -r 68 svn+ssh://svn@savannah.psi.ch/repos/meg/mxml/trunk mxml
5. cp -rvp debian/autoconf/* ./
6. ./configure --help
7. ./configure <--options>
8. make && make install
Then, I created the debian packages based on the new building files. You need to install root-system package from http://lcg-heppkg.web.cern.ch/lcg-heppkg/debian/. You can build debs this way:
1. untar daq-midas_deb.tar.gz somewhere, assuming ~/Temp.
2. cd ~/Temp/daq-midas
3. svn co -r 5065 svn+ssh://svn@savannah.psi.ch/repos/meg/midas/trunk midas
4. svn co -r 68 svn+ssh://svn@savannah.psi.ch/repos/meg/mxml/trunk mxml
5. dpkg-buildpackage -b -us -uc
I split the package into serverals parts:
- daq-midas-doc -- The documents and references
- daq-midas-root -- the midas runtime library and utilities built with root
- daq-midas-noroot -- the midas runtime library and utilities built without root
- daq-midas-dev-root -- the midas devel files (headers, objects, drivers, examples) built with root
- daq-midas-dev-noroot -- the midas devel files (headers, objects, drivers, examples) built without root
Here are the installation:
- executalbes -- /usr/lib/daq-midas/bin
- library and objs -- /usr/lib/daq-midas/lib
- headers -- /usr/lib/daq-midas/include
- sources and drivers -- /usr/share/daq-midas/
- docs and examples -- /usr/share/doc/daq-midas
- mdaq-config -- /usr/bin/mdaq-config
I add an auto-generated shell script -- mdaq-config. It behaves just like "root-config". You can get midas build flags and link flags this way:
gcc `mdaq-config --cflags` -c -o myfe.o myfe.c
gcc `mdaq-config --libs` -o myfe myfe.o `mdaq-config --libdir`/mfe.o
Bugs and suggestions are welcomed.
P.S. Based on debian packages, I am planing to write another script, "mdaq.py":
- each midas experiment will be configured in a file named "mdaq.yaml"
- mdaq.py reads the configure file and prepare the daq environment, just like "examples/experiment/start_daq.sh"
- mdaq.py will handle "start/stop/restart/info" about the daq codes.
The attached "mdaq.py" is the old one. |
| Attachment 1: daq-midas_deb.tar.gz
|
| Attachment 2: mdaq.py
|
#!/usr/bin/env python
'''
Python script to handle daq sessions using MIDAS/PSI.
Auther: Exaos Lee <Exaos DOT Lee AT gmail DOT com>
Date: 2009-07-15
'''
import os, os.path
import sys, signal, time
from commands import getoutput
from ConfigParser import ConfigParser
from pprint import pprint
class mdaq:
_codes_ = { 'MSERVER':"MIDAS Server", 'MHTTPD':"MIDAS HTTPD Server",
'ODBEDIT':"ODB Editor", 'LOGGER':"Data Logger",
'PROG_FE':"Frontend", 'PROG_ANA':"Analyzer" }
_env_ = dict()
def __init__(self,**kws):
env = dict()
if kws.has_key('fname') and kws['fname'] != "":
env = self.parse_conf(kws['fname'])
self.apply_env(env)
def parse_conf(self, fname):
if not os.path.isfile(fname):
print("**WARNING** File \"%s\" does not exist!"%fname)
return None
conf = ConfigParser()
conf.read(fname)
env={'CONF_FILE':fname }
fcpath = os.path.dirname(fname)
sec = 'EXP_INFO' ## Parsing Experiment Information
env['EXP_INFO'] = [ self.safe_parse(conf,sec,'Name'),
self.safe_parse(conf,sec,'Info'), ]
msg = self.safe_parse(conf,sec,'DAQ_DIR')
if msg != "" and os.path.isdir(msg):
dpath = msg
if not os.path.isabs(msg):
dpath = os.path.join(os.path.abspath(fcpath),msg)
env['DAQ_DIR'] = os.path.normpath(dpath)
## Parsing MIDAS configuration
env['MIDASSYS'] = ["MIDAS System Path",
self.safe_parse(conf,"MIDAS","MIDASSYS")]
if env['MIDASSYS'][1]=="": env['MIDASSYS'][1] = self.get_default_msys()
## Parsing Info of programs
for key in self._codes_.keys():
code = self.parse_prog_opt(conf, key, fpath=fcpath)
if code:
env[key] = [self._codes_[key], ]
env[key].extend(code)
port = self.safe_parse(conf, "MHTTPD","PORT")
if port != "":
if not env.has_key('MHTTPD'):
env['MHTTPD'] = ["MIDAS HTTP Server",
os.path.join(env['MIDASSYS'][1],"bin/mhttpd"),
"-h localhost -D"]
if "-p %s"%port not in env['MHTTPD'][2]:
env['MHTTPD'][2] = env['MHTTPD'][2] + " -p %s"%port
return env
def parse_prog_opt(self, cnf, sec, fpath="./"):
name = self.safe_parse(cnf, sec, "NAME")
path = self.safe_parse(cnf, sec, "PATH")
fn = os.path.join(path,name)
if name == "": fn = ""
elif not os.path.isabs(fn):
fn = os.path.normpath(os.path.join(os.path.abspath(fpath),fn))
else:
fn = os.path.normpath(fn)
opts = self.safe_parse(cnf, sec, "Option")
if opts != "" or name != "":
return [fn, opts]
return None
def safe_parse(self, cnf, sec, opt):
try: return cnf.get(sec,opt)
except: return ""
def get_default_msys(self):
if os.environ.has_key('MIDASSYS'): return os.environ['MIDASSYS']
return "/opt/MIDAS.PSI/Version/Current"
def apply_env(self, daq_env=dict()):
env = daq_env
if not env:
print("** WARNING** No environment defined! Using the default values. ****")
env = {'MIDASSYS':['MIDAS System Path', ""], 'CONF_FILE':"", }
if not env.has_key('MIDASSYS'): env['MIDASSYS'] = ['MIDAS System Path',""]
if env['MIDASSYS'][1]=="": env['MIDASSYS'][1] = self.get_default_msys()
def_env = {
'MSERVER' :["MIDAS Server",
os.path.join(env['MIDASSYS'][1],"bin/mserver"),
"-D", True],
'MHTTPD' :["MIDAS HTTP Server",
os.path.join(env['MIDASSYS'][1],"bin/mhttpd"),
"-h localhost -D -p 8080", True],
'ODBEDIT' :["ODB Editor",
os.path.join(env['MIDASSYS'][1],"bin/odbedit"),
"-c clean", False],
'LOGGER' :["Data Logger",
os.path.join(env['MIDASSYS'][1],"bin/mlogger"),
"", True],
'PROG_FE' :["Frontend","", "", True],
'PROG_ANA':["Analyzer","", "", True],
'EXP_INFO':["test","The test experiment"],
'DAQ_DIR':os.path.join(os.environ['HOME'],"online/test") }
for key in def_env.keys():
if not env.has_key(key): env[key] = def_env[key]
for key in self._codes_.keys():
if env[key][1] == "": env[key][1] = def_env[key][1]
if env[key][2] == "": env[key][2] = def_env[key][2]
if not os.path.isdir(env['DAQ_DIR']):
try: os.makedirs(env['DAQ_DIR'])
except: print("ERROR to make file")
## Asign default program options
exp_opt = "-e %s"%env['EXP_INFO'][0]
for key in ['LOGGER', 'PROG_FE', 'PROG_ANA', "MHTTPD"]:
if exp_opt not in env[key][2]:
env[key][2] = exp_opt + ' ' + env[key][2]
if "-D" not in env[key][2]:
env[key][2] = env[key][2] + ' -D'
if exp_opt not in env['ODBEDIT'][2]:
env['ODBEDIT'][2] = env['ODBEDIT'][2] + ' ' + exp_opt
self._env_ = env
def print_conf(self):
print "\n================= DAQ Config ====================="
for key in self._env_.keys():
print key,": ",
pprint(self._env_[key])
def info(self): self.print_conf()
## running programs
def getpids(self, pname):
return [int(k) for k in getoutput("pidof %s"%pname).strip().split()]
def kill_prog(self,pname):
for i in self.getpids(pname): os.kill(i,signal.SIGTERM)
def run_prog(self, prog):
if len(prog)>=4 and not prog[3]: return
if len(prog)>=3 and prog[1]:
print("Starting %s: %s"%(prog[0],prog[1]))
os.system("%s %s"%(prog[1],prog[2]))
else:
print("%s: no executable exist!"%prog[0])
def get_status(self,pfile):
msg = "Not running!"
pids = self.getpids( os.path.basename(pfile) )
if pids: return 'PIDs = ' + str(pids)
return msg
def echo_status(self,pname,pfile):
print("%s:\n %s\n "%(pname,pfile)
+ self.get_status(pfile))
## Session manage: start, stop, status, restart
def status(self):
print( "\n===== Session status for experiment \"%s\" =====\n" %
self._env_['EXP_INFO'][0] )
for code in ['MSERVER','MHTTPD','LOGGER','PROG_FE','PROG_ANA']:
self.echo_status(self._env_[code][0], self._env_[code][1])
def start(self):
## Running mserver & mhttpd
ms_pids = self.getpids(os.path.basename(self._env_['MSERVER'][1]))
if not ms_pids:
self.run_prog(self._env_['MSERVER'])
print("Killing %s ...\n"%self._env_['MHTTPD'][0])
self.kill_prog(self._env_['MHTTPD'][1])
if not self.getpids(os.path.basename(self._env_['MHTTPD'][1])):
self.run_prog(self._env_['MHTTPD'])
## Running FE and Analyzer
old_path = os.getcwd()
os.chdir( self._env_['DAQ_DIR'] )
# Init ODB
print("Initializing ODB for experiment %s ..." % self._env_['EXP_INFO'][0])
self.run_prog(self._env_['ODBEDIT'])
time.sleep(1)
# First stop, then start ...
self.stop()
time.sleep(1)
# Start FE & ANA
self.run_prog(self._env_['PROG_FE'])
self.run_prog(self._env_['PROG_ANA'])
time.sleep(1)
# Start Logger
self.run_prog(self._env_['LOGGER'])
os.chdir(old_path)
def stop(self):
for key in ["LOGGER", "PROG_FE", "PROG_ANA"]:
if self._env_[key][1]:
print("Killing threads:\n %s"%self._env_[key][1])
self.kill_prog(self._env_[key][1])
def stop_all(self):
self.stop()
for key in ['MHTTPD', 'MSERVER']:
if self._env_[key][1]:
print("Killing threads:\n %s"%self._env_[key][1])
self.kill_prog(self._env_[key][1])
def restart(self): self.start()
if __name__=='__main__':
from optparse import OptionParser
usage = "usage: %prog [options] <command>"
parser = OptionParser(usage=usage, version="%prog 0.1")
parser.add_option("-c","--config", metavar="filename",
help="Read config from FILENAME")
cmds = ["start","stop","stop_all","restart","status","info"]
(opts,args) = parser.parse_args( sys.argv[1:] )
if not args or len(args)>2:
parser.print_help()
print "\nCommands:\n\t",
pprint(cmds)
exit()
fcnf = "daq.conf"
if opts.config: fcnf = opts.config
if args[0] in cmds:
daq = mdaq(fname=fcnf)
exec( "daq.%s()"%args[0] )
else:
parser.print_help()
print "\nCommands:\n\t",
pprint(cmds)
|
|
786
|
18 Apr 2012 |
Exaos Lee | Bug Report | Build error with mlogger: invalid conversion from ‘void*’ to ‘gzFile’ | I tried to build MIDAS under ArchLinux, failed on errors as following:src/mlogger.cxx: In function ‘INT midas_flush_buffer(LOG_CHN*)’:
src/mlogger.cxx:1011:54: error: invalid conversion from ‘void*’ to ‘gzFile’ [-fpermissive]
In file included from src/mlogger.cxx:33:0:
/usr/include/zlib.h:1318:21: error: initializing argument 1 of ‘int gzwrite(gzFile, voidpc, unsigned int)’ [-fpermissive]
src/mlogger.cxx: In function ‘INT midas_log_open(LOG_CHN*, INT)’:
src/mlogger.cxx:1200:79: error: invalid conversion from ‘void*’ to ‘gzFile’ [-fpermissive]
In file included from src/mlogger.cxx:33:0: Please refer to attachment elog:786/1 for detail. There are also many warnings listed.
This error can be supressed by adding -fpermissive to CXXFLAGS. But the error message is correct."gzFile" is not equal to "void *"! C allows implicit casts between void* and any pointer type, C++ doesn't allow that. It's better to fix this error. A quick fix would be adding explicit casts. But I'm not sure what is the proper way to fix this. |
| Attachment 1: mlogger-err.log.gz
|
|
794
|
13 Jun 2012 |
Exaos Lee | Bug Report | Cannot start/stop run through mhttpd | Revision: r5286
Platform: Debian Linux 6.0.5 AMD64, with packages from squeeze-backports
Problem:
After building and installation, using the script 'start_daq.sh' to start
'sampleexpt'. Everything seems fine. But I cannot start a run through web. Using
'odbedit' and 'mtransition' to start/stop a run works fine. So, what may cause
such a problem? |
|
797
|
13 Jun 2012 |
Exaos Lee | Bug Report | Cannot start/stop run through mhttpd | > Well, it's mhttpd who cannot start the run, not you. So what happens when you press
> the "start run" button? Any errors in midas.log or in midas messages? Is mtransition
> in your PATH?
After pressing "start run", there is a message displayed: "Run start requested". There
is no error in midas.log. And mtransition is actually in my PATH. I even looked into
"mhttpd.cxx" and found where "cm_transition" is called for starting a run. I have no
clue to grasp the reason. |
|
798
|
14 Jun 2012 |
Exaos Lee | Bug Report | Cannot start/stop run through mhttpd | > > Revision: r5286
> > Platform: Debian Linux 6.0.5 AMD64, with packages from squeeze-backports
> > Problem:
> > After building and installation, using the script 'start_daq.sh' to start
> > 'sampleexpt'. Everything seems fine. But I cannot start a run through web. Using
> > 'odbedit' and 'mtransition' to start/stop a run works fine. So, what may cause
> > such a problem?
>
> Well, it's mhttpd who cannot start the run, not you. So what happens when you press
> the "start run" button? Any errors in midas.log or in midas messages? Is mtransition
> in your PATH?
>
> K.O.
I found the problem only appears when I run mhttpd in scripts, whether bash or python.
And I'm quite sure that the MIDAS environments (e.g. PATH, MIDAS_EXPTAB, MIDASSYS, etc.)
are set in such scripts. If I start mhttpd in an xterm with or without "-D", it works
fine. So, what's the difference between invoking mhttpd directly and through a script? |
|
1905
|
07 May 2020 |
Estelle | Bug Report | Conflic between Rootana and midas about the redefinition of TID_xxx data types | Dear Midas and Rootana people,
We have tried to update our midas DAQ with the new TID definitions describe in https://midas.triumf.ca/elog/Midas/1871
And we have noticed an incompatibility of this new definitions with Rootana when reading an XmlOdb in our offline analyzer.
The problem comes from the function FindArrayPath in XmlOdb.cxx and the comparison of bank type as strings.
Ex: comparing the strings "DWORD" and "UNINT32"
An naive solution would be to print the number associated to the type (ex: '6' for DWORD/UNINT32), but that would mean changing Rootana and Midas source code. Moreover, it does decrease the readability of the XmlOdb file.
Thanks for your time.
Estelle |
|
316
|
27 Dec 2006 |
Eric-Olivier LE BIGOT | Forum | Access to out_info from mana.c | Hello,
Is it possible to access out_info (defined in mana.c) from another program?
In fact, out_info is now defined as an (anonymous) "static struct" in mana.c,
which it seems to me precludes any direct use in another program. Is there an
indirect way of getting ahold of out_info? or of the information it contains?
out_info used to be defined as a *non-static* struct, and the code I'm currently
modifying used to compile seamlessly: it now stops the compilation during
linking time, as out_info is now static and the program I have to compile
contains an "extern struct {} out_info".
Any help would be much appreciated! I searched in vain in this forum for
details about out_info and I really need to access the information it contains!
EOL (a pure MIDAS novice) |
|
317
|
05 Jan 2007 |
Eric-Olivier LE BIGOT | Suggestion | Access to out_info from mana.c | Would it be relevant to transform out_info into a *non-static* variable of a type
defined by a *named* struct?
Currently, programs that try to access out_info cannot do it anymore; and they
typically copy the struct definition from mana.c, which is not robust against future
changes in mana.c.
If mana.c could be changed in the way described above, that would be great .
Otherwise, is it safe to patch it myself for local use? or is there a better way of
accessing out_info from mana.c?
As always, any help would be much appreciated :)
EOL
> Hello,
>
> Is it possible to access out_info (defined in mana.c) from another program?
>
> In fact, out_info is now defined as an (anonymous) "static struct" in mana.c,
> which it seems to me precludes any direct use in another program. Is there an
> indirect way of getting ahold of out_info? or of the information it contains?
>
> out_info used to be defined as a *non-static* struct, and the code I'm currently
> modifying used to compile seamlessly: it now stops the compilation during
> linking time, as out_info is now static and the program I have to compile
> contains an "extern struct {} out_info".
>
> Any help would be much appreciated! I searched in vain in this forum for
> details about out_info and I really need to access the information it contains!
>
> EOL (a pure MIDAS novice) |
|
206
|
05 Apr 2005 |
Donald Arseneau | Bug Report | pointers and segfault in yb_any_file_rclose | I'm getting segfaults in yb_any_file_rclose (closing a file opened with
yb_any_file_ropen with type MIDAS).
I think there are bugs with freeing from uninitialized pointers my.pmagta,
my.pyh, and my.pylrl (which are only set when opening a YBOS file). These
should be set to NULL in yb_any_file_ropen (case MIDAS). Likewise, the MIDAS
format pointers my.pmp and my.pmrd should be NULLed for YBOS opens.
It might be wise to also initialize the pointers in the "my" structure to null.
--Donald |
|
1396
|
24 Sep 2018 |
Devin Burke | Forum | Implementing MIDAS on a Satellite | Hello Everybody,
I am a member of a satellite team with a scientific payload and I am considering
coordinating the payload using MIDAS. This looks to be challenging since MIDAS
would be implemented on an Xilinx Spartan 6 FPGA with minimal hardware
resources. The idea would be to install a soft processor on the Spartan 6 and
run MIDAS through UCLinux either on the FPGA or boot it from SPI Flash. Does
anybody have any comments on how feasible this would be or perhaps have
experience implementing a similar system?
-Devin |
|
1402
|
25 Sep 2018 |
Devin Burke | Forum | Implementing MIDAS on a Satellite | > > Hello Everybody,
> >
> > I am a member of a satellite team with a scientific payload and I am considering
> > coordinating the payload using MIDAS. This looks to be challenging since MIDAS
> > would be implemented on an Xilinx Spartan 6 FPGA with minimal hardware
> > resources. The idea would be to install a soft processor on the Spartan 6 and
> > run MIDAS through UCLinux either on the FPGA or boot it from SPI Flash. Does
> > anybody have any comments on how feasible this would be or perhaps have
> > experience implementing a similar system?
> >
> > -Devin
>
> While some people successfully implemented a midas *client* in an FPGA softcore, the full midas
> backend would probably not fit into a Spartan 6. Having done some FPGA programming and
> working on satellites, I doubt that midas would be well suited for such an environment. It's
> probably some kind of overkill. The complete GUI is likely useless since you want to minimize your
> communication load on the satellite link.
>
> Stefan
Thank you for your comment Stefan. We do have some hardware resources on the board such as RAM, ROM and
Flash storage so we wouldn't necessarily have to virtualize everything. Ideally we would like a
completed and compressed file to be produced on board and regularly sent back to ground without
requiring remote access. MIDAS is appealing to us because its easily automated but we wouldn't
necessarily need functions like a GUI or web interface. Part of the discussion now is whether or not a
microblaze processor would be sufficient or if we need a dedicted ARM processor.
Devin |
|
548
|
09 Jan 2009 |
Derek Escontrias | Forum | mlogger problem | Hi,
I am running Scientific Linux with kernel 2.6.9-34.EL and I have
glibc-2.3.4-2.25. When I run mlogger, I receive the error:
*** glibc detected *** free(): invalid pointer: 0x0073e93e ***
Aborted
Any ideas? |
|
550
|
13 Jan 2009 |
Derek Escontrias | Forum | mlogger problem | > > Hi,
> >
> > I am running Scientific Linux with kernel 2.6.9-34.EL and I have
> > glibc-2.3.4-2.25. When I run mlogger, I receive the error:
> >
> > *** glibc detected *** free(): invalid pointer: 0x0073e93e ***
> > Aborted
> >
> > Any ideas?
>
> Not much. Try to clean up the ODB (delete the .ODB.SHM file, remove all shared
> memory via ipcrm) and run again. I run under kernel 2.6.18 and glibc 2.5 and this
> problem does not occur. If you cannot fix it, try to run mlogger inside gdb and
> make a stack trace to see who called the free().
Sorry for being vague. I cleaned up the ODB, but it doesn't seem to be the
problem. Here is a sample run of mlogger and gdb:
/**************************************************************
/**************************************************************
/**************************************************************
[root@tsunami AL_Test]# mlogger -v -d
*** glibc detected *** free(): invalid pointer: 0x007f793e ***
Aborted (core dumped)
[root@tsunami AL_Test]#
[root@tsunami AL_Test]#
[root@tsunami AL_Test]#
[root@tsunami AL_Test]#
[root@tsunami AL_Test]#
[root@tsunami AL_Test]#
[root@tsunami AL_Test]# gdb mlogger core.23213
GNU gdb Red Hat Linux (6.3.0.0-1.143.el4rh)
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-redhat-linux-gnu"...Using host libthread_db library
"/lib/tls/libthread_db.so.1".
Core was generated by `mlogger -v -d'.
Program terminated with signal 6, Aborted.
Reading symbols from /home/dayabay/Software/Root/lib/libCore.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libCore.so
Reading symbols from /home/dayabay/Software/Root/lib/libCint.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libCint.so
Reading symbols from /home/dayabay/Software/Root/lib/libRIO.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libRIO.so
Reading symbols from /home/dayabay/Software/Root/lib/libNet.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libNet.so
Reading symbols from /home/dayabay/Software/Root/lib/libHist.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libHist.so
Reading symbols from /home/dayabay/Software/Root/lib/libGraf.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libGraf.so
Reading symbols from /home/dayabay/Software/Root/lib/libGraf3d.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libGraf3d.so
Reading symbols from /home/dayabay/Software/Root/lib/libGpad.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libGpad.so
Reading symbols from /home/dayabay/Software/Root/lib/libTree.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libTree.so
Reading symbols from /home/dayabay/Software/Root/lib/libRint.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libRint.so
Reading symbols from /home/dayabay/Software/Root/lib/libPostscript.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libPostscript.so
Reading symbols from /home/dayabay/Software/Root/lib/libMatrix.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libMatrix.so
Reading symbols from /home/dayabay/Software/Root/lib/libPhysics.so...done.
Loaded symbols for /home/dayabay/Software/Root/lib/libPhysics.so
Reading symbols from /lib/libdl.so.2...done.
Loaded symbols for /lib/libdl.so.2
Reading symbols from /lib/libutil.so.1...done.
Loaded symbols for /lib/libutil.so.1
Reading symbols from /lib/tls/libpthread.so.0...done.
Loaded symbols for /lib/tls/libpthread.so.0
Reading symbols from /usr/lib/libstdc++.so.6...done.
Loaded symbols for /usr/lib/libstdc++.so.6
Reading symbols from /lib/tls/libm.so.6...done.
Loaded symbols for /lib/tls/libm.so.6
Reading symbols from /lib/libgcc_s.so.1...done.
Loaded symbols for /lib/libgcc_s.so.1
Reading symbols from /lib/tls/libc.so.6...done.
Loaded symbols for /lib/tls/libc.so.6
Reading symbols from /lib/libpcre.so.0...done.
Loaded symbols for /lib/libpcre.so.0
Reading symbols from /lib/libcrypt.so.1...done.
Loaded symbols for /lib/libcrypt.so.1
Reading symbols from /usr/lib/libfreetype.so.6...done.
Loaded symbols for /usr/lib/libfreetype.so.6
Reading symbols from /usr/lib/libz.so.1...done.
Loaded symbols for /usr/lib/libz.so.1
Reading symbols from /lib/ld-linux.so.2...done.
Loaded symbols for /lib/ld-linux.so.2
Reading symbols from /lib/libnss_files.so.2...done.
Loaded symbols for /lib/libnss_files.so.2
#0 0x002e37a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2
(gdb)
(gdb)
(gdb)
(gdb) where
#0 0x002e37a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2
#1 0x016d68b5 in raise () from /lib/tls/libc.so.6
#2 0x016d8329 in abort () from /lib/tls/libc.so.6
#3 0x0170a40a in __libc_message () from /lib/tls/libc.so.6
#4 0x01710a08 in _int_free () from /lib/tls/libc.so.6
#5 0x01710fda in free () from /lib/tls/libc.so.6
#6 0x08057108 in main (argc=3, argv=0xbff94f14) at src/mlogger.c:3473
(gdb)
/**************************************************************
/**************************************************************
/**************************************************************
I am running Midas 2.0.0 and here is a section of my mlogger.c:
/**************************************************************
/**************************************************************
/**************************************************************
/********************************************************************\
Name: mlogger.c
Created by: Stefan Ritt
Contents: MIDAS logger program
$Id: mlogger.c 3476 2006-12-20 09:00:26Z ritt $
\********************************************************************/
// stuff...
/*------------------------ main ------------------------------------*/
int main(int argc, char *argv[])
{
INT status, msg, i, size, run_number, ch = 0, state;
char host_name[HOST_NAME_LENGTH], exp_name[NAME_LENGTH], dir[256];
BOOL debug, daemon, save_mode;
DWORD last_time_kb = 0;
DWORD last_time_stat = 0;
HNDLE hktemp;
#ifdef HAVE_ROOT
char **rargv;
int rargc;
/* copy first argument */
rargc = 0;
rargv = (char **) malloc(sizeof(char *) * 2);
rargv[rargc] = (char *) malloc(strlen(argv[rargc]) + 1);
strcpy(rargv[rargc], argv[rargc]);
rargc++;
/* append argument "-b" for batch mode without graphics */
rargv[rargc] = (char *) malloc(3);
rargv[rargc++] = "-b";
TApplication theApp("mlogger", &rargc, rargv);
/* free argument memory */
free(rargv[0]);
free(rargv[1]); // Line: 3473
free(rargv);
#endif
// etc...
/**************************************************************
/**************************************************************
/**************************************************************
I'll play with it some, but I wanted to post this info first. |
|
560
|
26 Jan 2009 |
Derek Escontrias | Forum | Question - ODB access from a custom page | Hi, I am looking for a way to mutate ODB values from a custom page. I have been
using the edit attribute for the 'odb' tag, but for some things it would be nice
if a form can handle the change. I have seen references to ODBSet on the forums,
but I haven't been able to find documentation on it. Is there an available
Javascript library for Midas and/or are there more tags than I am aware of (I am
only aware of the 'odb' tag)? |
|
618
|
18 Aug 2009 |
Denis Calvet | Suggestion | Could not create strings other than 32 characters with odbedit -c "..." command | Hi,
I am writing shell scripts to create some tree structure in an ODB. When
creating an array of strings, the default length of each string element is 32
characters. If odbedit is used interactively to create the array of strings,
the user is prompted to enter a different length if desired. But if the
command odbedit is called from a shell script, I did not succeed in passing
the argument to get a different length.
I tried:
odbedit -c "create STRING Test[8][40]"
Or:
odbedit -c "create STRING Test[8] 40"
Or:
odbedit -c "create STRING Test[8] \n 40"
etc. all produce an array of 8 strings with 32 characters each.
I haven't tried all possible syntaxes, but I suspect the length argument is
dropped. If it has not been fixed in a later release than the one I am using,
could this problem be looked at?
Thanks,
Denis.
|
|
2451
|
13 Jan 2023 |
Denis Calvet | Suggestion | Debug printf remaining in mhttpd.cxx | Hi everyone,
It has been a long time since my last message. While porting Midas front-end
programs developed for the T2K experiment in 2008 to a modern version of Midas,
I noticed that some debug printf remain in mhttpd.cxx.
A number of debug messages are printed on stdout each time a graph is displayed
in the OldHistory window (which is the style of history plots that will continue
to be used in the upgraded T2K experiment for some technical reasons).
Here is an example of such debug messages:
Load from ODB History/Display/HA_EP_0/V33: hist plot: 8 variables
timescale: 1h, minimum: 0.000000, maximum: 0.000000, zero_ylow: 0, log_axis: 0,
show_run_markers: 1, show_values: 1, show_fill: 0, show_factor 0, enable_factor:
1
var[0] event [HA_TPC_SC][E0M00FEM_V33] formula [], colour [#00AAFF] label
[Mod_0] show_raw_value 0 factor 1.000000 offset 0.000000 voffset 0.000000 order
10
var[1] event [HA_TPC_SC][E0M01FEM_V33] formula [], colour [#FF9000] label
[Mod_1] show_raw_value 0 factor 1.000000 offset 0.000000 voffset 0.000000 order
20
var[2] event [HA_TPC_SC][E0M02FEM_V33] formula [], colour [#FF00A0] label
[Mod_2] show_raw_value 0 factor 1.000000 offset 0.000000 voffset 0.000000 order
30
var[3] event [HA_TPC_SC][E0M03FEM_V33] formula [], colour [#00C030] label
[Mod_3] show_raw_value 0 factor 1.000000 offset 0.000000 voffset 0.000000 order
40
var[4] event [HA_TPC_SC][E0M04FEM_V33] formula [], colour [#A0C0D0] label
[Mod_4] show_raw_value 0 factor 1.000000 offset 0.000000 voffset 0.000000 order
50
var[5] event [HA_TPC_SC][E0M05FEM_V33] formula [], colour [#D0A060] label
[Mod_5] show_raw_value 0 factor 1.000000 offset 0.000000 voffset 0.000000 order
60
var[6] event [HA_TPC_SC][E0M06FEM_V33] formula [], colour [#C04010] label
[Mod_6] show_raw_value 0 factor 1.000000 offset 0.000000 voffset 0.000000 order
70
var[7] event [HA_TPC_SC][E0M07FEM_V33] formula [], colour [#807060] label
[Mod_7] show_raw_value 0 factor 1.000000 offset 0.000000 voffset 0.000000 order
80
read_history: nvars 10, hs_read() status 1
read_history: 0: event [HA_TPC_SC], var [E0M00FEM_V33], index 0, odb index 0,
status 1, num_entries 475
read_history: 1: event [HA_TPC_SC], var [E0M01FEM_V33], index 0, odb index 1,
status 1, num_entries 475
read_history: 2: event [HA_TPC_SC], var [E0M02FEM_V33], index 0, odb index 2,
status 1, num_entries 475
read_history: 3: event [HA_TPC_SC], var [E0M03FEM_V33], index 0, odb index 3,
status 1, num_entries 475
read_history: 4: event [HA_TPC_SC], var [E0M04FEM_V33], index 0, odb index 4,
status 1, num_entries 475
read_history: 5: event [HA_TPC_SC], var [E0M05FEM_V33], index 0, odb index 5,
status 1, num_entries 475
read_history: 6: event [HA_TPC_SC], var [E0M06FEM_V33], index 0, odb index 6,
status 1, num_entries 475
read_history: 7: event [HA_TPC_SC], var [E0M07FEM_V33], index 0, odb index 7,
status 1, num_entries 475
read_history: 8: event [Run transitions], var [State], index 0, odb index -1,
status 1, num_entries 0
read_history: 9: event [Run transitions], var [Run number], index 0, odb index
-2, status 1, num_entries 0
Looking at the source code of mhttpd, these messages originate from:
[mhttpd.cxx line 10279] printf("Load from ODB %s: ", path.c_str());
[mhttpd.cxx line 10280] PrintHistPlot(*hp);
...
[mhttpd.cxx line 8336] int read_history(...
...
[mhttpd.cxx line 8343] int debug = 1;
...
Although seeing many debug messages in the mhttpd does not hurt, these can hide
important error messages. I would rather suggest to turn off these debug
messages by commenting out the relevant lines of code and setting the debug
variable to 0 in read_history().
That is a minor detail and it is always a pleasure to use Midas.
Best regards,
Denis.
|
|
323
|
21 Jan 2007 |
Denis Bilenko | Bug Report | buffer bugs | Hello,
We've been using midas and have stumbled upon some inconsistent behaviour:
1. Blocking calls to midas api aren't usable when client is connected through
mserver. This is true at least for bm_receive_event, but seems to be a more
general problem - midas application has call cm_yield within 10 seconds (or
whatever timeout is set) to remain alive.
That not the case when RPC is not used.
2. On Windows, two processes on the same machine can send/receive events to
each other only if they both use midas locally (through shared mem) or they
both use midas via RPC (through mserver), but not if they use different ways.
3. Receiving/sending same events from the same process - was possible in
1.9.5-1, not so in the current version (revision 3501, mxml revision 45). Is this an intended behavior fix?
To explain how to reproduce bugs, I will use 2 helper programs evprint.py and
evsend.py - for receiving and sending events respectively. You don't need
them, just something to send and receive events. (These are part of pymidas, which will be
released to public any time soon, but is quite usable already).
They both accept
* --path option in "host/experiment" format (for cm_connect_experiment call)
* --log option which command them to trace all midas' calls to terminal
evprint.py have two ways of receiving events
1) via looping over bm_receive_event
2) via providing callback to bm_request_event and looping over cm_yield(400) call
Example of use:
first-console$ python evprint.py receive
second-console$ python evsend.py 123
[first console]
id=2007 mask=2007 serial=2007 time=1169372833 len=3 '123'
So,
1. Blocking calls to midas api aren't usable when client is connected through
mserver.
$ python evprint.py --log --path 127.0.0.1/online receive"
cm_connect_experiment('127.0.0.1', 'online', 'evprint.py', None)
bm_open_buffer('SYSTEM', 1048576, &c_long(2)) -> BM_CREATED
bm_request_event(2, -1, -1, 2, &c_long(0), None)
... wait for a couple of seconds ...
[midas.c:9348:rpc_call] rpc timeout, routine = "bm_receive_event"
[system.c:3570:send_tcp] send(socket=0,size=8) returned -1, errno: 88 (Socket
operation on non-socket)
[midas.c:9326:rpc_call] send_tcp() failed
bm_receive_event(2, ...) -> RPC_TIMEOUT
bm_remove_event_request(2, 0) -> BM_INVALID_HANDLE
bm_close_buffer(2) -> BM_INVALID_HANDLE
cm_disconnect_experiment()
2. Missing events on windows
a) Both use midas locally - works
1: python evprint.py receive
2: python evsend.py 123
1: id=2007 mask=2007 serial=2007 time=1169372833 len=3 '123'
b) Both use midas via RPC - works
1: python evprint.py --path 127.0.0.1/ dispatch
2: python evsend.py --path 127.0.0.1/ 123
1: id=2007 mask=2007 serial=2007 time=1169373366 len=3 '123'
c) Receiver uses midas locally, sender uses mserver - doesn't work on windows
1: python evprint.py dispatch
2: python evsend.py --path 127.0.0.1/ 123
1: (nothing printed)
d) The other way around - doesn't work on windows
1: python evprint.py --path 127.0.0.1/ dispatch
2: python evsend.py 123
1: (nothing printed)
No such problem on linux.
3. Receiving/sending same events from the same process.
To reproduce this, just request events, send one and then try to receive
it – via cm_yield. I care for this, because I have a test in pymidas which
relies on this behavior.
hope this will help. |
|
327
|
23 Jan 2007 |
Denis Bilenko | Bug Report | buffer bugs | 1 & 3 - thanks for the fix and the explanation, as for 2 - I've tried consume and produce
and still has a problem:
Config: GET_ALL, event id = 1, event size = 10, Receive via callback,
OS = Windows XP SP2
I restart mserver manually from command-line every time (not using system service).
I start produce first, then I start consume.
In two cases of four starting 'consume' causes 'produce' to exit immediatelly.
Guess which two 
both local or both remote - works (i.e. non-zero rates in both consoles)
produce local, consume via rpc and vice versa - 'produce' exits with error
1. produce via rpc, consume locally
first console:D:\denis\cmd\midas\current\06jan21-export\midas\NT\bin>produce.exe
ID of event to produce: 1
Host to connect: 127.0.0.1
Event size: 10
Level: 0.0 %, Rate: 0.64 MB/sec
flush
Level: 0.0 %, Rate: 0.64 MB/sec
Level: 0.0 %, Rate: 0.63 MB/sec
Level: 0.0 %, Rate: 0.64 MB/sec
Level: 0.0 %, Rate: 0.61 MB/sec
Level: 0.0 %, Rate: 0.62 MB/sec
Level: 0.0 %, Rate: 0.62 MB/sec
Level: 0.0 %, Rate: 0.64 MB/sec
Level: 0.0 %, Rate: 0.63 MB/sec
Level: 0.0 %, Rate: 0.63 MB/sec
Level: 0.0 %, Rate: 0.64 MB/sec
flush
Level: 0.0 %, Rate: 0.62 MB/sec
## Now I've started consume in the other console ##
[system.c:3570:send_tcp] send(socket=1900,size=8136) returned -1, errno: 0 (No error)
send_tcp() returned -1
[midas.c:9669:rpc_send_event] send_tcp() failed
rpc_send_event returned error 503, event_size 10 second console:D:\denis\cmd\midas\current\06jan21-export\midas\NT\bin>consume.exe
ID of event to request: 1
Host to connect:
Get all events (0/1): 1
Receive via callback ([y]/n):
Level: 0.0 %, Rate: 0.00 MB/sec, ser mismatches: 0
Level: 0.0 %, Rate: 0.00 MB/sec, ser mismatches: 0
Level: 0.0 %, Rate: 0.00 MB/sec, ser mismatches: 0
Received break. Aborting... mserver's output:D:\denis\cmd\midas\current\06jan21-export\midas\NT\bin\mserver.exe started interactively
[midas.c:2315:bm_validate_client_index] Invalid client index 0 in buffer 'SYSTEM'.
Client name 'Power Consumer', pid 1964 should be 3216 2. produce locally, consume via rpc
D:\denis\cmd\midas\current\06jan21-export\midas\NT\bin>produce.exe
ID of event to produce: 1
Host to connect:
Event size: 10
Client 'Producer' (PID 2584) on 'ODB' removed by cm_watchdog (idle 144.1s,TO 10s)
Level: 0.0 %, Rate: 3.20 MB/sec
flush
Level: 0.0 %, Rate: 3.20 MB/sec
Level: 0.0 %, Rate: 3.11 MB/sec
Level: 0.0 %, Rate: 3.13 MB/sec
Level: 0.0 %, Rate: 3.06 MB/sec
Level: 0.0 %, Rate: 3.20 MB/sec
Level: 0.0 %, Rate: 2.96 MB/sec
Level: 0.0 %, Rate: 3.11 MB/sec
Level: 0.0 %, Rate: 3.18 MB/sec
Level: 0.0 %, Rate: 3.13 MB/sec
Level: 0.0 %, Rate: 3.17 MB/sec
flush
Level: 0.0 %, Rate: 3.19 MB/sec
Level: 0.0 %, Rate: 3.08 MB/sec
Level: 0.0 %, Rate: 3.06 MB/sec
## Now I've started consume ##
[midas.c:2315:bm_validate_client_index] Invalid client index 0 in buffer 'SYSTEM'. Client name '', pid 0 should be 760
Second console:
D:\denis\cmd\midas\current\06jan21-export\midas\NT\bin>consume.exe
ID of event to request: 1
Host to connect: 127.0.0.1
Get all events (0/1): 1
Receive via callback ([y]/n):
Level: 0.0 %, Rate: 0.00 MB/sec, ser mismatches: 0
Level: 0.0 %, Rate: 0.00 MB/sec, ser mismatches: 0
Received break. Aborting...
Level: 0.0 %, Rate: 0.00 MB/sec, ser mismatches: 0
mserver haven't said anything.
3. Both remote (just for comparison)
D:\denis\cmd\midas\current\06jan21-export\midas\NT\bin>produce.exe
ID of event to produce: 1
Host to connect: 127.0.0.1
Event size: 10
Level: 0.0 %, Rate: 0.65 MB/sec
flush
Level: 0.0 %, Rate: 0.66 MB/sec
Level: 0.0 %, Rate: 0.65 MB/sec
Level: 0.0 %, Rate: 0.60 MB/sec
Level: 0.0 %, Rate: 0.64 MB/sec
Level: 0.0 %, Rate: 0.63 MB/sec
Level: 0.0 %, Rate: 0.61 MB/sec
Level: 0.0 %, Rate: 0.63 MB/sec
Level: 0.0 %, Rate: 0.65 MB/sec
Level: 0.0 %, Rate: 0.65 MB/sec
Level: 0.0 %, Rate: 0.67 MB/sec
flush
Level: 0.0 %, Rate: 0.66 MB/sec
Level: 0.0 %, Rate: 0.65 MB/sec
Level: 0.0 %, Rate: 0.65 MB/sec
Level: 0.0 %, Rate: 0.66 MB/sec
Level: 0.0 %, Rate: 0.66 MB/sec
Level: 0.0 %, Rate: 0.65 MB/sec
Level: 0.0 %, Rate: 0.66 MB/sec
Level: 0.0 %, Rate: 0.66 MB/sec
Level: 0.0 %, Rate: 0.66 MB/sec
Level: 66.8 %, Rate: 0.66 MB/sec
flush
Level: 0.0 %, Rate: 0.00 MB/sec
Level: 66.8 %, Rate: 0.31 MB/sec
Level: 57.2 %, Rate: 0.15 MB/sec
Level: 57.3 %, Rate: 0.14 MB/sec
Level: 57.3 %, Rate: 0.15 MB/sec
Level: 57.3 %, Rate: 0.14 MB/sec
Level: 57.3 %, Rate: 0.14 MB/sec
Level: 57.3 %, Rate: 0.14 MB/sec
Received break. Aborting...
Received 2nd break. Hard abort.
[midas.c:1581:] cm_disconnect_experiment not called at end of program
Second console:
D:\denis\cmd\midas\current\06jan21-export\midas\NT\bin>consume.exe
ID of event to request: 1
Host to connect: 127.0.0.1
Get all events (0/1): 1
Receive via callback ([y]/n):
[consume.c:73:process_event] Serial number mismatch: Ser: 1397076, OldSer: 0, ID: 1, size: 10
Level: 37.1 %, Rate: 0.00 MB/sec, ser mismatches: 1
Level: 0.0 %, Rate: 0.15 MB/sec, ser mismatches: 1
Level: 95.4 %, Rate: 0.08 MB/sec, ser mismatches: 1
Level: 66.8 %, Rate: 0.14 MB/sec, ser mismatches: 1
Level: 66.8 %, Rate: 0.12 MB/sec, ser mismatches: 1
Level: 76.3 %, Rate: 0.12 MB/sec, ser mismatches: 1
Level: 95.4 %, Rate: 0.11 MB/sec, ser mismatches: 1
Level: 57.3 %, Rate: 0.15 MB/sec, ser mismatches: 1
Level: 66.8 %, Rate: 0.11 MB/sec, ser mismatches: 1
Level: 85.9 %, Rate: 0.11 MB/sec, ser mismatches: 1
Level: 95.5 %, Rate: 0.12 MB/sec, ser mismatches: 1
Level: 57.4 %, Rate: 0.15 MB/sec, ser mismatches: 1
Level: 9.7 %, Rate: 0.15 MB/sec, ser mismatches: 1
[Producer] [midas.c:1581:] cm_disconnect_experiment not called at end of program
Level: 0.0 %, Rate: 0.03 MB/sec, ser mismatches: 1
Level: 0.0 %, Rate: 0.00 MB/sec, ser mismatches: 1
Received break. Aborting...
|
|
423
|
05 Feb 2008 |
Denis Bilenko | Info | pymidas 0.6.0 released - python bindings for Midas | Hi!
I have released pymidas - Python binding to Midas.
It includes support for Online Database, Buffer, event
construction and parsing.
We have used it for a couple years now here at CMD. (http://cmd.inp.nsk.su)
One of principal DAQ applications here (Slow Control Frontend) is
written in Python using pymidas.
http://cmd.inp.nsk.su/~bilenko/projects/pymidas/pymidas.html |
|