Back Midas Rome Roody Rootana
  Midas DAQ System, Page 132 of 152  Not logged in ELOG logo
New entries since:Wed Dec 31 16:00:00 1969
    Reply  08 Oct 2024, Mark Grimes, Bug Report, Difficulty running MIDAS on Rocky 9.4 
We run Midas with no problems on Rocky 9.4, although not in a virtual machine.  We're very close to the head of `develop`.

I'm fairly sure I've seen an error like this before.  I didn't pay it much attention because it was transitory and I was doing something weird at the time
    Reply  08 Oct 2024, Amy Roberts, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> > We're trying to install the SuperCDMS version of MIDAS on a Rocky 9.4 Virtual 
> > Machine and are getting a persistent error when we run mserver.  As far as I 
> > know there are minimal changes between this and the MIDAS branch, but Ben Smith 
    Reply  08 Oct 2024, Amy Roberts, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> > We're trying to install the SuperCDMS version of MIDAS on a Rocky 9.4 Virtual 
> > Machine and are getting a persistent error when we run mserver.
> >
    Reply  08 Oct 2024, Konstantin Olchanski, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> I've uploaded the current core dump at: https://gitlab.com/det-lab/coredumps#.

I cannot read the core dump without the corresponding executable (and likely all it's shared libraries).
    Reply  08 Oct 2024, Konstantin Olchanski, Bug Report, Difficulty running MIDAS on Rocky 9.4 
I read these error messages. There is no ODB corruption. ODB semaphore is locked and all midas programs will fail, they will timeout trying to get the lock,
report the timeout, then it looks like a bug was introduced where instead of hard exit or abort() they attempt a clean shutdown which crashes from a recursive
call in db_lock_database(). Amy's 
    Reply  08 Oct 2024, Konstantin Olchanski, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> Basically I think Rocky 9.4 is a red herring.

This is what likely happened:
    Reply  08 Oct 2024, Konstantin Olchanski, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> I read these error messages. There is no ODB corruption. ODB semaphore is locked and all midas programs will fail...

Recovery from this is:
    Reply  10 Oct 2024, Amy Roberts, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> > I've uploaded the current core dump at: https://gitlab.com/det-lab/coredumps#.

> I cannot read the core dump without the corresponding executable (and likely all it's shared libraries).
Entry  11 Oct 2024, Denis Calvet, Bug Report, Frontend name must differ from others by more than the last three characters 
Hi,
I have developed two Midas front-end programs for different hardware. The frontend_name of the first one is "FSCD_SC" (slow control) and that of the second
one is "FSCD_PS" (power supply).
    Reply  11 Oct 2024, Stefan Ritt, Bug Report, Frontend name must differ from others by more than the last three characters 
Hi Denis,

indeed a bug. Will fix it next week.
    Reply  13 Oct 2024, Konstantin Olchanski, Bug Report, Difficulty running MIDAS on Rocky 9.4 
Thank you for the stack trace, I fixed the buglet that cause midas programs to crash twice,
once on failure to lock ODB, then call exit() -> atexit() handlers -> cm_check_connect() -> crash on ODB lock 
failure is the cm_msg() codes.
    Reply  16 Oct 2024, Amy Roberts, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> Thank you for the stack trace, I fixed the buglet that cause midas programs to crash twice,
> once on failure to lock ODB, then call exit() -> atexit() handlers -> cm_check_connect() -> crash on ODB lock 
> failure is the cm_msg() codes.
    Reply  18 Oct 2024, Stefan Ritt, Bug Report, Frontend name must differ from others by more than the last three characters 
Fixed and committed.

Best,
    Reply  18 Oct 2024, Konstantin Olchanski, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> [aroberts@sdfcdmsdaq midas]$ odbedit
> [ODBEdit,ERROR] [odb.cxx:2043:db_open_database,ERROR] Removed ODB client 'ODBEdit', index 0 because process pid 
> 1615051 does not exists
    Reply  18 Oct 2024, Konstantin Olchanski, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> suddenly, an ODB semaphore timeout...

I am wondering if something bizarre is going on, like the system clock going backwards. I heard of things like that 
Entry  23 Oct 2024, Lukas Gerritzen, Bug Report, ODB key picker does not close when creating link / Edit-on-run string box too large Screenshot_2024-10-23_at_11.38.38.png
To reproduce:
In the interactive ODB, click the 🔗 icon to create a link. Next to the target,  click the "..." button to open 
the key picker browser. Then try to close it by either:
Entry  28 Oct 2024, Lukas Gerritzen, Bug Report, Visual glitch in history system Screen_Recording_2024-10-28_at_17.23.57.movScreenshot_2024-10-28_at_17.29.34.png
Today, I encountered the bug shown in the attached video. The value of the plotted curve does not match the mouseover number.

When trying to understand it better, I stopped being able to replicate. Has anyone else observed a similar problem? 
    Reply  28 Oct 2024, Lukas Gerritzen, Bug Report, Visual glitch in history system Screenshot_2024-10-28_at_17.34.26.png
 
    Reply  28 Oct 2024, Amy Roberts, Bug Report, Difficulty running MIDAS on Rocky 9.4 
> Now for each timeout it will print detailed syscall and timing information, if time goes backwards, it should catch it.

It appears that time is moving forward:
    Reply  06 Nov 2024, Amy Roberts, Bug Report, Difficulty running MIDAS on Rocky 9.4 
After following Konstantin's debugging suggestions, I thought I would try to replicate 
the issue on my own computer.  My hope was that I could provide instructions for 
replicating the bug so that the MIDAS team could try debugging things more easily.
ELOG V3.1.4-2e1708b5