It turns out that the new priority sequencing of run state transitions had a
flaw: the frontends, the analyzer and the logger all registered at priority 500
and were invoked in essentially a random order. For example the frontend could
get a begin-run transition before the logger and so start sending data before
the logger opened the output file. Same for the analyzer and same for the end of
run. Also the sequencing for pause/resume run and begin/end run was different
when the two pairs ought to have identical sequencing.

I now commited changes to mana.c and mlogger.c changing their transition sequencing:

start and resume:
200 - logger (mlogger.c, no change)
300 - analyzer (mana.c, was 500)
500 - frontends (mfe.c, no change)

stop and pause:
500 - frontends (mfe.c, no change)
700 - analyzer (mana.c, was 500)
800 - mlogger (mlogger.c, was 500)

P.S. However, even after this change, the TRIUMF ISAC/Dragon experiment still
see an anomaly in the analyzer, where it receives data events after the
end-of-run transition.

K.O.

Minor changes to run transitions code:
- improve debug messages
- fail transition if cannot connect to one of the clients
K.O.

Some time ago, the "remote CAMAC" functionality in mfe.c was made conditional on
HAVE_CAMAC. This flag is not set by default so remote camac calls silently do
not work, unless midas is compiled in a special way. I am too lazy to compile
midas differently depending on what hardware I use, so I split
register_cnaf_callback() into a separate file and made it easy to call directly
from the user front end.

I left the HAVE_CAMAC bits in mfe.c so people who use that would see no change.

Affected files:
Makefile (add cnaf_callback.o)
midas.h (add void register_cnaf_callback(int debug);
mfe.c (move the rpc code to cnaf_callback.c, call register_cnaf_callback())
cnaf_callback.c (new file)

K.O.

Minor Makefile changes:
- add "-m32" gcc flag to force 32-bit compilation on 64-bit Linux.
- do not link ybos.o into lazylogger and mdump.
K.O.

I have been plagued by ODB corruption when I run the analyzer for the first time
after setting up the new experiment. Some time ago, I traced this to
mana.c::book_ttree() and now I found and fixed the bug, fix now commited to
midas cvs. In book_ttree(), db_find("/Analyzer/Bank switches") was returning an
error and setting hkey to zero. Then we called db_open_record() with hkey==0,
which cased ODB corruption later on. The normal db_validate_hkey() did not catch
this because it considers hkey==0 to be valid (when most likely it is not). K.O.

I fixed some minor bit rot in the example experiment: a few minor Makefile
problems, make the analyzer use the current histogram creation macros, etc. I
also added startup and shutdown scripts. These will be documented as we work
through them with our Summer student. K.O.

I had to move strlcpy & strlcat into a separate file "strlcpy.c". A header file
"strlcpy.h" was added as well. This way one can omit the old HAVE_STRLCPY which
made life hard. The windows and linux makefiles were adjusted accordingly, but
for Max OS X there might be some fixes necessary which I could not test.

> Current MIDAS versions nag me about setting the env.variable MIDASSYS to the
> "midas installation directory", but I do not have one, so what should I set
> MIDASSYS to? I checkout MIDAS from cvs into /home/olchansk/daq/midas, build it
> there, run it from there. I never do "make install" (I am not "root" on every
> machine; I am not the only MIDAS user on every machine). What should I set
> MIDASSYS to? K.O.

Then set it to /home/olchansk/daq/midas. The reason for MIDASSYS is the same as
for ROOTSYS. Having it allows other packages like ROME to access the Midas source
code, include files and libraries.

Current MIDAS versions nag me about setting the env.variable MIDASSYS to the
"midas installation directory", but I do not have one, so what should I set
MIDASSYS to? I checkout MIDAS from cvs into /home/olchansk/daq/midas, build it
there, run it from there. I never do "make install" (I am not "root" on every
machine; I am not the only MIDAS user on every machine). What should I set
MIDASSYS to? K.O.

> I'm getting segfaults in yb_any_file_rclose (closing a file opened with
> yb_any_file_ropen with type MIDAS).
> 
> I think there are bugs with freeing from uninitialized pointers my.pmagta,
> my.pyh, and my.pylrl (which are only set when opening a YBOS file).  These
> should be set to NULL in yb_any_file_ropen (case MIDAS).  Likewise, the MIDAS
> format pointers my.pmp and my.pmrd should be NULLed for YBOS opens. 
> 
> It might be wise to also initialize the pointers in the "my" structure to null.

Do you see this crash even after my fix to (another?) double free?

K.O.

I'm getting segfaults in yb_any_file_rclose (closing a file opened with
yb_any_file_ropen with type MIDAS).

I think there are bugs with freeing from uninitialized pointers my.pmagta,
my.pyh, and my.pylrl (which are only set when opening a YBOS file).  These
should be set to NULL in yb_any_file_ropen (case MIDAS).  Likewise, the MIDAS
format pointers my.pmp and my.pmrd should be NULLed for YBOS opens. 

It might be wise to also initialize the pointers in the "my" structure to null.

--Donald              

> Looks like the midas mxml Makefile bits did not make it to CVS. Current Makefile
> revision 1.67 does not have them and building midas from cvs sources fails because it
> does not find mxml.h and mxml.c

I forgot to commit the new Makefile, thanks for reminding me. Now it should be fine.

> > All the XML functionality is implemented in the new mxml.c/h library
> 
> mxml.c/h ... I separated it's CVS tree.
>
> The midas Makefile has been adjusted accordingly.

Looks like the midas mxml Makefile bits did not make it to CVS. Current Makefile
revision 1.67 does not have them and building midas from cvs sources fails because it
does not find mxml.h and mxml.c

K.O.

> All the XML functionality is implemented in the new mxml.c/h library, which has
> been added to the distribution, and which can be used in other projects as well
> (XML configuration of ROODY?). It has already been successfully implemented in
> ROME, so ROME is no longer dependent on libxml.

Since mxml.c/h is used in several projects (midas, ROME, elog), I separated it's
CVS tree. So in order to compile midas from scratch, you have to check out midas
AND mxml like

cd ~
cvs -d :ext:cvs@midas.psi.ch:/usr/local/cvsroot checkout midas
cvs -d :ext:cvs@midas.psi.ch:/usr/local/cvsroot checkout mxml

cd midas
make

so the "mxml" tree is ABOVE the "midas" tree. The midas Makefile has been adjusted
accordingly. If you decide to put the mxml somwhere else, you have to change
MXML_DIR in the Makefile accordingly.

- Stefan

Dear midas users,

I have changed the ODB dump format to XML. As you might know, the logger writes
a special begin-of-run event to the .mid file which includes an ASCII dump of
the ODB. The same at the end-of-run. To read these ODB dumps back in offline
analysis, this requires setting up a ODB just to read back these values. In
order to avoid this, we switched the format to XML instead of the old ASCII
format. That way ROME can read the ODB dump and extract individual values from
it without setting up a shared memory.

A similar thing has been made for the ODB dumps to separate .odb files, which
are controlled by "/Logger/ODB Dump" and "/Logger/ODB Dump file". If the dump
file has the extension .xml, the file is dumped in XML format as well.

All the XML functionality is implemented in the new mxml.c/h library, which has
been added to the distribution, and which can be used in other projects as well
(XML configuration of ROODY?). It has already been successfully implemented in
ROME, so ROME is no longer dependent on libxml.

- Stefan

Dear Midas users,

may I kindly invite you present your work at the Real-Time 2005 Conference in
Stockholm, June 4-10. The conference deals with all kinds of real time
applications like DAQ, control systems etc. It is a small conference with no
paralles sessions, and with two interesting short courses. The deadline has been
prolonged until March 13, 2005. If you are interested, please register under

http://www.physto.se/RT2005/

Here is the official letter from the chairman:

=====================================================================
               14th IEEE-NPSS Real Time Conference 2005
                  Stockholm, Sweden, 4-10 June, 2005
              Conference web site: www.physto.se/RT2005/

**********************************************************************
*                                                                    *
*        ABSTRACT SUBMISSION PROLONGED! DEADLINE: March 13, 2005     *
*                                                                    *
**********************************************************************

Considering that the Real Time conference is a highly meritorious and
multidisciplinary conference with purely plenary sessions and that the
accepted papers may be submitted to a special issue of the IEEE
Transactions on Nuclear Science we would like to give more people the
opportunity to participate. Therefore we have organized the program so
that there is now more time for talks than at the RT2003 and we are
extending the abstract submission to March 13. We strongly encourage
you to participate!

Submit your abstract and a summary through the conference web site
"Abstract submission" link. Please, make sure that your colleagues know
about the conference and invite them.

I would also like to take this opportunity to announce the two short
courses we have organized for Sunday 5/6:

- "Gigabit Networking for Data Acquisition Systems - A practical
introduction"
  Artur Barczyk, CERN

- "System On Programmable Chip - A design tutorial"
  Marco Riccioli, Xilinx

Please find the abstracts and more information about the conference on
www.physto.se/RT2005/

Thank you if you have already submitted an abstract.

Richard Jacobsson
General Chairman, RT2005 Conference

Email: RT2005@cern.ch
Phone: +41-22-767 36 19
Fax:   +41-22-767 94 25
CERN Meyrin
1211 Geneva 23
Switzerland

We stumbled upon and fixed a "double free" bug in src/ybos.c causing crashes in
lazylogger writing .mid files in the FORMAT_MIDAS format (why does it use
ybos.c? Pierre says- for generic file i/o). Why this code had ever worked before
remains a mystery. K.O.

> is there a reason why histograms are not saved after a replay?
> 
>    /* save histos if requested */
>    if (out_info.histo_dump && clp.online) {
>                               ^^^^^^^^^^
> 
> perhaps the && should be ||?

The original reason for that is the for running online, you want some histos for
monitoring after each run. For running offline, you specify a root output file via
"-o xxx.root" which contains trees AND histos. So the histos would there be twice
if you remove the "clp.online" from above.

Having "-o xxx.root" is IMHO a cleaner way, since you might want to analyze a run
in different ways (like using different calibrations). So what you do is specify
different "-o cal00123.root", "-o final00123.root" and so on, while with the
mechanism in eor() you always get the same file name. So try using "-o xxx.root"
and see if that fits your needs.

is there a reason why histograms are not saved after a replay?

   /* save histos if requested */
   if (out_info.histo_dump && clp.online) {
                              ^^^^^^^^^^

perhaps the && should be ||?

> (preliminary, untested. I will keep this updated as I get testing feedback)
> 
> With recent changes to mana.c, creation of user ROOT objects in the MIDAS
> analyser has changed. Here is the new example code for creating ROOT objects
> that are visible in ROODY and are saved into the histogram file.
> 
> 1) in the "global" context (outside of any function)
> 
> #include <TH1D.h>
> #include <TProfile.h>
> 
> static TH1D* gMyHist1 = 0;
> static TProfile* gMyHist2 = 0;
> 
> 2) In the analyzer "init" or "begin run" method, create the histogram:
> 
> //extern TFolder *gManaHistosFolder; // from midas.h
> gMyHist1 = new TH1D("gMyHist1",...);
> gMyHist2 = new TProfile("gMyHist2",...);
> gManaHistosFolder->Add(gMyHist1);
> gManaHistosFolder->Add(gMyHist2);
> 
> (note: this will produce an warning about "possible memory leak")
> 
> 3) In the per-event method, fill the histograms
> 
> gMyHist1->Fill(x);
> gMyHist2->Fill(x,y);
> 
> K.O.


the book functions provide a convenient place to check against object duplication
and memory leaks etc., and a place to ensure that consistent subfolders are being
used.  eg. a while back we decided that TCutGs should be in a "cuts" subfolder.

To extend the booking to TProfile is fairly easy.  In fact if you want to
use the simple constructor TProfile::TProfile (const char *, const char *, Int_t,
Axis_t, Axis_t), then you could infact just use h1_book<TProfile>.

It now seems to me that the names h1_book, h2_book, cut_book are all too long
and even more upsetting are inconsistent.  Some of them are templates (most) and
some are not.  Perhaps they should all be templates, and all have the same name.
The attached patch accomplishes this (without deleting the old names).  With this
patch you can now do

gMyHist1 = book<TProfile>( "gMyHist2",...);

New book templates are needed when you (1) wish to change the subfolder, or (2)
need to use a different argument list in the constructor.  If you need help with
this for the TProfile constructors which are different from TH1D constructors then
let me know.  They should be easy to do.

For TGraph at lot depends on how you want to initialise the data points.