Dear experts,
         I would like to have some clarification about the meaning and use of the 
tags in the ODB under /History/Tags.

I noticed that, if a history plot is created, but the name of the corresponding 
variable is changed later and the plot is modified accordingly, the old name 
persists in the /History/Tags list along with the new one. So, it appears in the 
list of variables when a new history plot is created.

It seems not to compromise the functionalities of the history system, but it is 
prone to create confusion.

Is it the expected behavior? What is the correct procedure to follow if the name 
of a variable has to be changed?

Thank you,
     Francesco

Dear experts,
      in the CYGNO experiment, we readout CMOS cameras for optical readout of GEM-TPCs. So far, we only developed the readout for a single camera. In the future, we will have multiple cameras to read out (up to 18 in the next phase of the experiment), and we are investigating how to optimize the readout by exploiting parallelization.

One idea is to start parallel threads within a single equipment. Alternatively, one could associate different equipment with each camera and run an Event Builder. Perhaps other solutions did not come to mind. Which one would you regard as the most effective and elegant?

Thank you very much,
           Francesco

Hi,

I've been doing some preliminary work to use at least the MIDAS
SQL history component for a new CERN experiment (Aegis). I wonder
whether there is any plan to support 64-bit signed/unsigned integer data types
in MIDAS. time_t on 64-bit architectures is actually signed 64-bit
(the 'easy' way to work around the 2038 crisis), and this may be enough to
cause problems.

Thanks.
Francesco Prelz
INFN Milano

Hello,

When I  connect to analyzer on a x86_64 processor(with Roody),  
a analyzer break with segmentation violation in the root_server_thread  function.
Same code are working fine on a 32bit processor.
As I found the problem are in exchanging of pointers between analyzer and client.
Before to send a pointer, it is saved a pointer in int (size=4, instead of 8) at
this place:
Index: src/mana.c
===================================================================
--- src/mana.c  (revision 3498)
+++ src/mana.c  (working copy)
@@ -5386,7 +5386,7 @@

             //write pointer
             message->Reset(kMESS_ANY);
-            int p = (POINTER_T) obj;
+            POINTER_T p = (POINTER_T) obj;
             *message << p;
             sock->Send(*message);


Sincerely Yours,
Fedor Ignatov 

Yes right, Problem of a segmentation violation is solved with this patch. Now it works
fine on x86_64.

Fedor 

> Do I understand you right? With your patch it works even on 64 bit, right? Or do you
> mean there is still a segmentation violation? Anyhow I committed your patch since the
> "int" is clearly incorrect.
> 
> - Stefan

After starting midas (mhttpd &, and mlogger -D) and running the `fetest` frontend I went into the midas/python/examples directory and ran basic_hist_script.py, and, even though I could see the 'pytest' program in the Programs page,

Valid events are:
Enter event name:

was printed out, which signified that no events were found. No errors were displayed.

Instead, when trying to do the same in javascript (using mjsonrpc_send_request( mjsonrpc_make_request("hs_get_events")).then(console.log)), I was able to get the expected events.

The History page also displayed the expected data and the plots worked correctly.

Device info: Chip: Apple M1 Pro, OS: Sequoia (15.3)

MIDAS version: bitbucket commit 84c7ef7

Python version: 3.13.2

> After starting midas (mhttpd &, and mlogger -D) and running the `fetest` frontend I went into the midas/python/examples directory and ran basic_hist_script.py, and, even though I could see the 'pytest' program in the Programs page,
> 
> Valid events are:
> Enter event name:
> 
> was printed out, which signified that no events were found. No errors were displayed.
> 
> Instead, when trying to do the same in javascript (using mjsonrpc_send_request( mjsonrpc_make_request("hs_get_events")).then(console.log)), I was able to get the expected events.
> 
> The History page also displayed the expected data and the plots worked correctly.
> 
> Device info: Chip: Apple M1 Pro, OS: Sequoia (15.3)
> 
> MIDAS version: bitbucket commit 84c7ef7
> 
> Python version: 3.13.2


I tested the command this morning and it worked. The most likely cause of the errors was that I was on a beta version of macOS: Switching beta updates off fixed the issue. Thanks for the help!

Setup:
setting up midas, starting mhttpd and mlogger and running fetest.

The History page and the javascript mjsonrpc client are both able to fetch historical data for test_slow/data. Javascript code used is included here:

mjsonrpc_call(
  "hs_read_arraybuffer",
  {
    start_time: Math.floor((new Date()).getTime() /1000) - 1000,
    end_time: Math.floor((new Date()).getTime() /1000),
    events: ["test_slow/data"],
    tags: ["data"],
    index: [0],
  },
  "arraybuffer"
).then(console.log)

However, the python client does not find any valid events:

Setup:
An exptab is created and the environment variables MIDAS_EXPTAB and MIDAS_EXPT_NAME and MIDASSYS are set (together with the correct PATH)

Running /midas/python/examples/basic_hist_script.py and typing in data:

Valid events are:
* Run transitions
* rrandom/SLOW
* test_slow/data
Enter event name: test_slow/data
Valid tags for test_slow/data are:
* data
Enter tag name: data
Event/tag test_slow/data/data has 1 elements
How many hours: 1
Interval in seconds: 1 # other values were also tested, without success
0 entries found

We expect entries to be found, however do not.

Tested setups:
Macbook Pro Sequoia 15.3 with Python 3.13.2, ROOT latest, midas bitbucket commit 84c7ef7
Windows 11 with Python 3.11, ROOT latest, midas latest commit (development branch)

> Unfortunately I again cannot reproduce this:
> 
> $ python ~/DAQ/midas_latest/python/examples/basic_hist_script.py
> Valid events are:
> * Run transitions
> * test_slow/data
> Enter event name: test_slow/data
> Valid tags for test_slow/data are:
> * data
> Enter tag name: data
> Event/tag test_slow/data/data has 1 elements
> How many hours: 1
> Interval in seconds: 1
> 78 entries found
> 2025/03/17 17:00:56 => 98.097391
> 2025/03/17 17:00:57 => 98.982151
> 2025/03/17 17:00:58 => 99.589187
> 2025/03/17 17:00:59 => 99.926821
> 2025/03/17 17:01:00 => 99.989878
> 2025/03/17 17:01:01 => 99.778216
> 2025/03/17 17:01:02 => 99.292485
> .......
> 
> 
> I want to narrow down whether the issue is in the basic_hist_script.py or the lower-level code. So there are a few steps of debugging to do.
> 
> 
> 
> 1) Run code directly in the python interpreter: 
> 
> Can you run the following and send the output please?
> 
> ```
> import midas.client
> c = midas.client.MidasClient("history_test")
> data = c.hist_get_recent_data(1,1,"test_slow/data","data")
> print(f"event_name='{data[0]['event_name']}', tag_name='{data[0]['tag_name']}', num_entries={data[0]['num_entries']}, status={data[0]['status']}, arrlen={len(data[0]['values'])}")
> ```
> 
> For me, I get:
> event_name='test_slow/data', tag_name='data', num_entries=441, status=1, arrlen=441
> 
> 
> 
> 2) If things look sensible for you (status=1, non-zero num_entries), then the problem is in the basic_hist_script.py. Can you add the same print() statement in basic_hist_script.py immediately after the call to hist_get_recent_data(), then run that script again and send the output of that?
> 
> 
> 
> 3) Debug the python/C conversions.
> 
> In midas/client.py add the following line to hist_get_data() immediately before the call to self.lib.c_hs_read():
> 
> ```
>         print(f"c_start_time={c_start_time.value}, c_end_time={c_end_time.value}, c_interval={c_interval.value}, c_event_name={c_event_name.value}, c_tag_name={c_tag_name.value}")
> ```
> 
> Then run the following and send the output:
> 
> ```
> import midas.client
> c = midas.client.MidasClient("history_test")
> data = c.hist_get_recent_data(1,1,"test_slow/data","data")
> ```
> 
> For me, I get:
> c_start_time=1742254428, c_end_time=1742258028, c_interval=1, c_event_name=b'test_slow/data', c_tag_name=b'data'
> 
> I want to check that the UNIX timestamps match what you expect for your server, and that nothing weird is going on with the python/C string conversions.
> 
> 
> Thanks,
> Ben

Hi, thank you for the support!

1)
event_name='test_slow/data', tag_name='data', num_entries=0, status=1, arrlen=0
2)
The number of entries is zero
3)
I get
c_start_time=1742275653, c_end_time=1742279253, c_interval=1, c_event_name=b'test_slow/data', c_tag_name=b'data'

> Unfortunately I again cannot reproduce this:
> 
> $ python ~/DAQ/midas_latest/python/examples/basic_hist_script.py
> Valid events are:
> * Run transitions
> * test_slow/data
> Enter event name: test_slow/data
> Valid tags for test_slow/data are:
> * data
> Enter tag name: data
> Event/tag test_slow/data/data has 1 elements
> How many hours: 1
> Interval in seconds: 1
> 78 entries found
> 2025/03/17 17:00:56 => 98.097391
> 2025/03/17 17:00:57 => 98.982151
> 2025/03/17 17:00:58 => 99.589187
> 2025/03/17 17:00:59 => 99.926821
> 2025/03/17 17:01:00 => 99.989878
> 2025/03/17 17:01:01 => 99.778216
> 2025/03/17 17:01:02 => 99.292485
> .......
> 
> 
> I want to narrow down whether the issue is in the basic_hist_script.py or the lower-level code. So there are a few steps of debugging to do.
> 
> 
> 
> 1) Run code directly in the python interpreter: 
> 
> Can you run the following and send the output please?
> 
> ```
> import midas.client
> c = midas.client.MidasClient("history_test")
> data = c.hist_get_recent_data(1,1,"test_slow/data","data")
> print(f"event_name='{data[0]['event_name']}', tag_name='{data[0]['tag_name']}', num_entries={data[0]['num_entries']}, status={data[0]['status']}, arrlen={len(data[0]['values'])}")
> ```
> 
> For me, I get:
> event_name='test_slow/data', tag_name='data', num_entries=441, status=1, arrlen=441
> 
> 
> 
> 2) If things look sensible for you (status=1, non-zero num_entries), then the problem is in the basic_hist_script.py. Can you add the same print() statement in basic_hist_script.py immediately after the call to hist_get_recent_data(), then run that script again and send the output of that?
> 
> 
> 
> 3) Debug the python/C conversions.
> 
> In midas/client.py add the following line to hist_get_data() immediately before the call to self.lib.c_hs_read():
> 
> ```
>         print(f"c_start_time={c_start_time.value}, c_end_time={c_end_time.value}, c_interval={c_interval.value}, c_event_name={c_event_name.value}, c_tag_name={c_tag_name.value}")
> ```
> 
> Then run the following and send the output:
> 
> ```
> import midas.client
> c = midas.client.MidasClient("history_test")
> data = c.hist_get_recent_data(1,1,"test_slow/data","data")
> ```
> 
> For me, I get:
> c_start_time=1742254428, c_end_time=1742258028, c_interval=1, c_event_name=b'test_slow/data', c_tag_name=b'data'
> 
> I want to check that the UNIX timestamps match what you expect for your server, and that nothing weird is going on with the python/C string conversions.
> 
> 
> Thanks,
> Ben

Hi, thank you for the support!

Running the commands on the Macbook pro leads to
1)
event_name='test_slow/data', tag_name='data', num_entries=0, status=1, arrlen=0
2)
The number of entries is zero
3)
I get
c_start_time=1742275653, c_end_time=1742279253, c_interval=1, c_event_name=b'test_slow/data', c_tag_name=b'data'

However right after running these commands I removed a .SHM_HOST.TXT file
(due to me working both at home and at PSI, my computer hostname changes when I switch the network, so I remove .SHM_HOST.TXT to be able to run experiments)

and reran the code, and it suddenly worked! This is good, but I do not know what fixed it... I had done more extensive tests yesterday and also had to delete .SHM_HOST.TXT multiple times, to no avail.
Do you have any ideas as to what could be happening? Similarly to my previous bug report, which was fixed by updating macOS to a more stable version, could this have been due to an automatic update?

If the problem still persists on the Windows machine I will post an update.

I add the following to makefile and try to treat Darwin as FreeBSD/Linux.
But I failed.
============ 
#-----------------------
# This is for MacOS X
#
ifeq ($(OSTYPE), Darwin)
CC = gcc
OS_DIR = Darwin
OSFLAGS = -DOS_DARWIN -DOS_LINUX
LIBS = -lbsd -lcompat
SPECIFIC_OS_PRG =
endif
============

I got the following errors:
=============
gcc -c -g -O2 -Wall -Iinclude -Idrivers -LDarwin/lib -DINCLUDE_FTPLIB  
-DOS_DARWIN -DOS_FREEBSD -o Darwin/lib/midas.o src/midas.c
In file included from include/midasinc.h:45,
                 from include/msystem.h:114,
                 from src/midas.c:623:
/usr/include/string.h:112: error: conflicting types for `strlcat'
include/midas.h:1701: error: previous declaration of `strlcat'
/usr/include/string.h:113: error: conflicting types for `strlcpy'
include/midas.h:1700: error: previous declaration of `strlcpy'
In file included from include/msystem.h:114,
                 from src/midas.c:623:
include/midasinc.h:161:21: sys/vfs.h: No such file or directory
include/midasinc.h:164:17: pty.h: No such file or directory
src/midas.c:780: error: conflicting types for `dbg_malloc'
include/midas.h:1478: error: previous declaration of `dbg_malloc'
src/midas.c:817: error: conflicting types for `dbg_calloc'
include/midas.h:1479: error: previous declaration of `dbg_calloc'
src/midas.c:858: error: conflicting types for `strlcpy'
/usr/include/string.h:113: error: previous declaration of `strlcpy'
src/midas.c:892: error: conflicting types for `strlcat'
/usr/include/string.h:112: error: previous declaration of `strlcat'
gmake: *** [Darwin/lib/midas.o] Error 1
==========

Could anyone give me some hints. Thanks!

> In the Midas doc under "Quick Start"
> http://midas.triumf.ca/doc/html/quickstart.html
> you will find the proper cvs command for accessing the latest cvs Midas
> version. The public pwd is cvs. You will only be able to checkout/update the
> package.

I cannot checkout module:
------------
01:52:16: pc2075.psi.ch: Operation timed out
01:52:16: cvs [checkout aborted]: end of file from server (consult above
messages if any)
------------

Could anybody add download tar package in the WWW interface of CVS repository.
I know the original CGI script has such a feature. Thanks.

> The current (cvs) version of MIDAS should build on Mac OS X right out of the
> box- I fixed all the problems you report back in February(?)- see the macosx
> thread in this forum. A few weeks ago I verified that it still compiles on Mac
> OS 10.3.4. The Mac OS port received minimal testing- I checked that "odbedit"
> and "mhttpd" run, that's about it. K.O.
> 

Thanks a lot. But I cannot checkout module:
------------
01:52:16: pc2075.psi.ch: Operation timed out
01:52:16: cvs [checkout aborted]: end of file from server (consult above
messages if any)
------------

Could anybody add download tar package in the WWW interface of CVS repository.
I know the original CGI script has such a feature. Thanks.

P.S.
I use these commands to checkout:
   cvs -e ssh -d :ext:cvs@midas.psi.ch:/usr/local/cvsroot checkout midas
   cvs -e ssh -d :ext:cvs@midas.psi.ch:/usr/local/cvsroot update

> 
> Should work fine, just tried from outside PSI. Please check again.

Unfortunately, I still encounter the same problem. 
---
pc2075.psi.ch: Operation timed out
cvs [checkout aborted]: end of file from server (consult above messages if any)
---

I am in LNS-INFN (Italy), i.e., I am outside PSI. So ... what's the problem? I try to
ping the host, and it is reachable:
--------
[exaos@exaos cvsnew]$ ping midas.psi.ch
PING pc2075.psi.ch (129.129.228.23): 56 data bytes
64 bytes from 129.129.228.23: icmp_seq=0 ttl=50 time=67.237 ms
64 bytes from 129.129.228.23: icmp_seq=1 ttl=50 time=64.202 ms
64 bytes from 129.129.228.23: icmp_seq=2 ttl=50 time=56.278 ms
...
--------
Is it the problem of firewall? I am not sure. So strange.

> 
> The tar package is only done for a new release (which will happen in the next days
> BTW), so http://midas.psi.ch/download/tar/ contains the most recent packages. Upon
> request I make a midas-snapshot.tar.gz, but since there will be a 1.9.4 soon, it's
> maybe not necessary right now.

Waiting for the new release ...

I cannot checkout from the cvs server. So I download each latest file from the WWW
interface of CVS. While compiling these files, I encountered the following problems:
-------------
...
g++ -DHAVE_ROOT -c -g -O2 -Wall -Iinclude -Idrivers -Ldarwin/lib -DINCLUDE_FTPLIB  
-DOS_LINUX -DOS_DARWIN -DHAVE_STRLCPY -fPIC -Wno-unused-function -D_REENTRANT
-I/sw/include -I/opt/root/current/include -Wl,-rpath,/opt/root/current/lib -o
darwin/lib/rmana.o src/mana.c
g++: -rpath: linker input file unused because linking not done
g++: /opt/root/current/lib: linker input file unused because linking not done
...
g++ -g -O2 -Wall -Iinclude -Idrivers -Ldarwin/lib -DINCLUDE_FTPLIB   -DOS_LINUX
-DOS_DARWIN -DHAVE_STRLCPY -fPIC -Wno-unused-function -DHAVE_ROOT -D_REENTRANT
-I/sw/include -I/opt/root/current/include -Wl,-rpath,/opt/root/current/lib -o
darwin/bin/mlogger src/mlogger.c darwin/lib/libmidas.a -L/opt/root/current/lib -u
_G__cpp_setupG__Hist -u _G__cpp_setupG__Graf1 -u _G__cpp_setupG__G3D -u
_G__cpp_setupG__GPad -u _G__cpp_setupG__Tree -u _G__cpp_setupG__Rint -u
_G__cpp_setupG__PostScript -u _G__cpp_setupG__Matrix -u _G__cpp_setupG__Quadp -u
_G__cpp_setupG__Physics -lCore -lCint -lHist -lGraf -lGraf3d -lGpad -lTree -lRint
-lPostscript -lMatrix -lQuadp -lPhysics -lpthread -lm -L/sw/lib -ldl -lpthread
ld: unknown flag: -rpath
gmake: *** [darwin/bin/mlogger] Error 1
---------------
What does '-rpath' mean? It is just a linking error. Thanks.

I have compiled the sources on Darwin 7.4.0 with gcc 3.3. After the compilation of source codes, I 
try to execute "gmake install". I got the following message:
-------
Nothing to be done for "install".
-------

The install target could not be executed. Then I add the following line to the Makefile:
------
.PHONY: install
------

The install target can be executed. But when it is tring to copy "dio" to the proper directory, it 
cannot find the file. Then I found that the "utils" target isn't built. 
I try to build the target: darwin/bin/dio, I got the following error:
-------
cc -g -O2 -Wall -Iinclude -Idrivers -Ldarwin/lib -DINCLUDE_FTPLIB   -DOS_LINUX -DOS_DARWIN 
-DHAVE_STRLCPY -fPIC -Wno-unused-function -o darwin/bin/dio utils/dio.c
utils/dio.c:39:20: sys/io.h: No such file or directory
utils/dio.c: In function `main':
utils/dio.c:46: warning: implicit declaration of function `iopl'
gmake: *** [darwin/bin/dio] Error 1
--------
So, the include file "sys/io.h" may be changed under Darwin. I don't know how. I will try later. I 
hope somebody can notice this. 
Best regards.

There are not such a file "io.h" inside my MacOS X. In fact, I didn't find any file containing function iopl().
So what is the equivalent function of iopl() under MacOS X? The utility dio should be modified in order to be compiled under Darwin-
gcc platform. 

diff Makefile Makefile.modify
-------------------------------------
404,405c404,405
< $(BIN_DIR)/mcnaf: $(UTL_DIR)/mcnaf.c $(DRV_DIR)/bus/camacrpc.c
<       $(CC) $(CFLAGS) $(OSFLAGS) -o $@ $(UTL_DIR)/mcnaf.c $(DRV_DIR)/bus/camacrpc.c $(LIB) $(LIBS)
---
> $(BIN_DIR)/mcnaf: $(UTL_DIR)/mcnaf.c $(DRV_DIR)/camac/camacrpc.c
>       $(CC) $(CFLAGS) $(OSFLAGS) -o $@ $(UTL_DIR)/mcnaf.c $(DRV_DIR)/camac/camacrpc.c $(LIB) $(LIBS)

...
install: darwin/bin/dio: No such file or directory
make: *** [install] Error 71

404,405c404,405
< $(BIN_DIR)/mcnaf: $(UTL_DIR)/mcnaf.c $(DRV_DIR)/camac/camacrpc.c
<       $(CC) $(CFLAGS) $(OSFLAGS) -o $@ $(UTL_DIR)/mcnaf.c $(DRV_DIR)/camac/camacrpc.c $(LIB) $(LIBS)
---
> $(BIN_DIR)/mcnaf: $(UTL_DIR)/mcnaf.c $(DRV_DIR)/bus/camacrpc.c
>       $(CC) $(CFLAGS) $(OSFLAGS) -o $@ $(UTL_DIR)/mcnaf.c $(DRV_DIR)/bus/camacrpc.c $(LIB) $(LIBS)
438c438,439
<       @for i in mserver mhttpd odbedit mlogger ; \
---
> 
>       @for i in mserver mhttpd odbedit mlogger dio ; \
444,447d444
<       chmod +s $(SYSBIN_DIR)/mhttpd
< 
< ifeq ($(OSTYPE),linux)
<       install -v -m 755 $(BIN_DIR)/dio $(SYSBIN_DIR)
449c446
< endif
---
>       chmod +s $(SYSBIN_DIR)/mhttpd

src/mana.c: In function ‘write_event_hbook’:
src/mana.c:2881: error: invalid assignment

src/mana.c: In function ‘write_event_hbook’:
src/mana.c:2881: warning: target of assignment not really an lvalue; this will be a hard error in the future

2880            /* shift data pointer to next item */
2881            (char *) pdata += key.item_size * key.num_values;

2880            /* shift data pointer to next item */
2881            pdata += key.item_size * key.num_values * sizeof(char) ;