There was no feedback. This code has been commited. K.O.

> Invalid values of ODB /RunInfo/State cause mhttpd crash in
> show_status_page() because of an out of bounds access to the array of state
> names. Suggest this fix: remove array of state names, use existing ladder of
> if/else statements to explicitely set state name. Verified the fix works for
> TWIST. Will commit this into MIDAS CVS unless get feedback.
> 
> src/mhttpd.c:show_status_page() {
>   ...
>   rsprintf("<tr align=center><td>Run #%d", runinfo.run_number);
> 
>   if (runinfo.state == STATE_STOPPED)
>     rsprintf("<td colspan=1 bgcolor=#FF0000>Stopped");
>   else if (runinfo.state == STATE_PAUSED)
>     rsprintf("<td colspan=1 bgcolor=#FFFF00>Paused");
>   else if (runinfo.state == STATE_RUNNING)
>     rsprintf("<td colspan=1 bgcolor=#00FF00>Running");
>   else
>     rsprintf("<td colspan=1 bgcolor=#FFFFFF>Unknown");
> 
>   if (runinfo.requested_transition)
>   ...
> 
> K.O.

Invalid values of ODB /RunInfo/State cause mhttpd crash in
show_status_page() because of an out of bounds access to the array of state
names. Suggest this fix: remove array of state names, use existing ladder of
if/else statements to explicitely set state name. Verified the fix works for
TWIST. Will commit this into MIDAS CVS unless get feedback.

src/mhttpd.c:show_status_page() {
  ...
  rsprintf("<tr align=center><td>Run #%d", runinfo.run_number);

  if (runinfo.state == STATE_STOPPED)
    rsprintf("<td colspan=1 bgcolor=#FF0000>Stopped");
  else if (runinfo.state == STATE_PAUSED)
    rsprintf("<td colspan=1 bgcolor=#FFFF00>Paused");
  else if (runinfo.state == STATE_RUNNING)
    rsprintf("<td colspan=1 bgcolor=#00FF00>Running");
  else
    rsprintf("<td colspan=1 bgcolor=#FFFFFF>Unknown");

  if (runinfo.requested_transition)
  ...

K.O.

> I am debugging the frequent problem where the run number is mysteriously
> reset to zero. As a first step, I am commiting changes to mhttpd.c and midas.c:
> - abort on obviously corrupted "run number < 0"
> - abort on cm_transition() to run 0 (the only place where the run number is
> explicitely written to ODB)
> - in the mhttpd "Start run" form, reject user setting the run number to <= 0.

- abort on cm_transition() from run 0 to 1 during auto restart in mlogger.

Cvs diff:

RCS file: /usr/local/cvsroot/midas/src/mlogger.c,v
retrieving revision 1.65
diff -r1.65 mlogger.c
3277a3278,3283
>         if (run_number <= 0)
>           {
>           cm_msg(MERROR, "main", "aborting on attempt to use invalid run
number %d", run_number);
>           abort();
>           }
> 

K.O.

I am debugging the frequent problem where the run number is mysteriously
reset to zero. As a first step, I am commiting changes to mhttpd.c and midas.c:
- abort on obviously corrupted "run number < 0"
- abort on cm_transition() to run 0 (the only place where the run number is
explicitely written to ODB)
- in the mhttpd "Start run" form, reject user setting the run number to <= 0.

Here is the CVS diff:

===================================================================
RCS file: /usr/local/cvsroot/midas/src/mhttpd.c,v
retrieving revision 1.253
diff -r1.253 mhttpd.c
2451a2452,2457
>   if (run_number < 0)
>     {
>     cm_msg(MERROR, "show_elog_new", "aborting on attempt to use invalid
run number %d",run_number);
>     abort();
>     }
> 
2506a2513,2519
> 
>     if (run_number < 0)
>       {
>       cm_msg(MERROR, "show_elog_new", "aborting on attempt to use invalid
run number %d",run_number);
>       abort();
>       }
> 
3582a3596,3602
> 
>   if (run_number < 0)
>     {
>     cm_msg(MERROR, "show_form_query", "aborting on attempt to use invalid
run number %d",run_number);
>     abort();
>     }
> 
5730a5751,5756
>   if (rn < 0) // value "zero" is okey
>     {
>     cm_msg(MERROR, "show_start_page", "aborting on attempt to use invalid
run number %d",rn);
>     abort();
>     }
> 
9684a9711,9719
>       if (i <= 0)
>         {
>         cm_msg(MERROR, "interprete", "Start run: invalid run number %d",i);
>         memset(str,0,sizeof(str));
>         snprintf(str,sizeof(str)-1,"Invalid run number %d",i);
>         show_error(str);
>         return;
>         }
> 
Index: src/midas.c
===================================================================
RCS file: /usr/local/cvsroot/midas/src/midas.c,v
retrieving revision 1.193
diff -r1.193 midas.c
3786c3786
<         status = cm_transition(_requested_transition | TR_DEFERRED, 0,
str, 256, SYNC, FALSE);
---
>         status = cm_transition(_requested_transition | TR_DEFERRED, 0,
str, sizeof(str), SYNC, FALSE);
3906a3907,3912
>   if (run_number <= 0)
>     {
>     cm_msg(MERROR, "cm_transition", "aborting on attempt to use invalid
run number %d",run_number);
>     abort();
>     }
> 
16069a16076,16081
>     }
> 
>   if (run_number < 0)
>     {
>     cm_msg(MERROR, "el_submit", "aborting on attempt to use invalid run
number %d", run_number);
>     abort();

K.O.

> > > While adding new functionality to submit_elog() ....
> 
> The whole elog functionality in mhttpd will be replaced (sometime) ...

I humbly submit that this has been the standard reply for the last 2 years since I was aware of 
the "last N days does not always work" problem (just saw it again yesterday).

K.O.

> > While adding new functionality to submit_elog() (add the message text to 
the
> > outgoing email), I noticed that the email text is being stored into an 
array
> > of size 256, mail_text[256], without any checks for array overrun. This
> > cannot be good. How should this be corrected?
> > K.O.
> 
> Similar problem exists in midas.c::el_submit(). The array "message[10000]" 
is
> easy to overrun by submitting a long elog message.
> 
> K.O.

The whole elog functionality in mhttpd will be replaced (sometime) by the 
standalone ELOG package, linked against mhttpd. The ELOG functionality is 
much richer and does not conatin all the mentioned problems which have been 
fixed there some time ago. For the time being it might however be worth to 
fix the mentioned problems, but without spending too much time on it.

> While adding new functionality to submit_elog() (add the message text to the
> outgoing email), I noticed that the email text is being stored into an array
> of size 256, mail_text[256], without any checks for array overrun. This
> cannot be good. How should this be corrected?
> K.O.

Similar problem exists in midas.c::el_submit(). The array "message[10000]" is
easy to overrun by submitting a long elog message.

K.O.

While adding new functionality to submit_elog() (add the message text to the
outgoing email), I noticed that the email text is being stored into an array
of size 256, mail_text[256], without any checks for array overrun. This
cannot be good. How should this be corrected?
K.O.

> > > around to implement it, until now. I also added assert() traps for the 
most
> > > common array overruns in the Elog code.
> > 
> > In addition to the assert() one should use strlcat() and strlcpy() all 
over 
> > the code to avoid buffer overruns. The ELOG standalone code does that 
already 
> > properly.
> > 
> > - Stefan
> 
> Yes, the original authors should have used strlcat(). Now that I uncovered 
this source of mhttpd 
> memory corruption, maybe some volunteer will fix it up properly.
> 
> K.O.

I am the original author and will fix all that once I merged mhttpd and elog. 
Due to my current task list, this will happen probably in November.

- Stefan

> > around to implement it, until now. I also added assert() traps for the most
> > common array overruns in the Elog code.
> 
> In addition to the assert() one should use strlcat() and strlcpy() all over 
> the code to avoid buffer overruns. The ELOG standalone code does that already 
> properly.
> 
> - Stefan

Yes, the original authors should have used strlcat(). Now that I uncovered this source of mhttpd 
memory corruption, maybe some volunteer will fix it up properly.

K.O.

> around to implement it, until now. I also added assert() traps for the most
> common array overruns in the Elog code.

In addition to the assert() one should use strlcat() and strlcpy() all over 
the code to avoid buffer overruns. The ELOG standalone code does that already 
properly.

- Stefan

This commit adds the elog message text to the outgoing email message. This
functionality has been requested a logn time ago, but I guess nobody got
around to implement it, until now. I also added assert() traps for the most
common array overruns in the Elog code.

Here is the cvs diff:

Index: src/mhttpd.c
===================================================================
RCS file: /usr/local/cvsroot/midas/src/mhttpd.c,v
retrieving revision 1.252
diff -r1.252 mhttpd.c
768a769
> #include <assert.h>
3740c3741
< char   mail_to[256], mail_from[256], mail_text[256], mail_list[256],
---
> char   mail_to[256], mail_from[256], mail_text[10000], mail_list[256],
3921a3923,3925
>         // zero out the array. needed because later strncat() does not
always add the trailing '\0'
>         memset(mail_text,0,sizeof(mail_text));
> 
3931a3936,3945
> 
>         assert(strlen(mail_text) + 100 < sizeof(mail_text)); // bomb out
on array overrun.
> 
>         strcat(mail_text+strlen(mail_text),"\n");
>         // this strncat() depends on the mail_text array being zeroed out:
>         // strncat() does not always add the trailing '\0'
>        
strncat(mail_text+strlen(mail_text),getparam("text"),sizeof(mail_text)-strlen(mail_text)-50);
>         strcat(mail_text+strlen(mail_text),"\n");
> 
>         assert(strlen(mail_text) < sizeof(mail_text)); // bomb out on
array overrun.
Index: src/midas.c
===================================================================
RCS file: /usr/local/cvsroot/midas/src/midas.c,v
retrieving revision 1.192
diff -r1.192 midas.c
604a605
> #include <assert.h>
16267a16269,16270
> 
>   assert(strlen(message) < sizeof(message)); // bomb out on array overrun.

K.O.

> > test
> > test
> > test
> 
> another test
> 
> K.O.

I got the two email notifications, if you have tried that...

> test
> test
> test

another test

K.O.

test
test
test

> ss_thread_create now returns the thread ID on success, and zero on failure.
> Previously returned SS_SUCCESS or SS_NO_THREAD. User must now test the
> return value to determine result.
> 
> ss_thread_kill added to kill the passed thread ID. Returns SS_SUCCESS or
> SS_NO_THREAD.
> 
> Any thread creation must be verified now, and old code must be examined to
> ensure the return value is checked.

Thank you for that post. Internally, threads are not use in midas, so there 
should be no problem. Only experiments using threads explicitly should take 
care.

ss_thread_create now returns the thread ID on success, and zero on failure.
Previously returned SS_SUCCESS or SS_NO_THREAD. User must now test the
return value to determine result.

ss_thread_kill added to kill the passed thread ID. Returns SS_SUCCESS or
SS_NO_THREAD.

Any thread creation must be verified now, and old code must be examined to
ensure the return value is checked.

I had to add a 'umask' opiton to the loggers (lazy and mlogger) for the new 
PSI archive. One can now put a filename into the settings like:

archive,21,user,pw,dir,run%05d.mid,026

where the optional last parameter is used for a "umask 026" command just 
sent to the FTP server after the connection has been established. This 
changes the mode bits of the newly transferred file. We needed that so that 
the files are group readable, since several people from one group want to 
read the data.

I committed mlogger.c and ybos.c which contains the ftp code (should 
actually go into lazylogger.c instead of ybos.c).

I just realized that db_set_value, db_set_data, db_set_num_values and 
db_merge_data do not check for num_values == 0. With such a parameter the 
ODB can become corrupted, since zero length ODB entries are not allowed. I 
fixed the according places in odb.c and committed the changes. Everyone 
with ODB corruption problems should update that code.

The default C indentation style in xemacs uses "tab" characters, violating
the MIDAS coding convention. To disable this misfeature in xemacs (emacs
too?), put this incantation in your .xemacs/custom.el file:

(custom-set-variables
 '(indent-tabs-mode nil))

K.O.