Hi,

> What's the best way to make these messages go away? 
1.
> - Change the logic in db_validate_and_repair_key_wlocked() to not worry if keys are 10+ years old? 
2.
> - Write a script to "touch" all the old keys so they've been modified recently?
3.
> - Something else?

I wondered about this just under a year ago, and Konstantin forwarded my query here:
https://daq00.triumf.ca/elog-midas/Midas/2470

I am now of the opinion that 2 is not a good approach since it removes potentially
useful information.

I think some version of 1. is the correct choice. Whatever it fix is, I think it
should not care that timestamps of when variables are set are "old" (or at least
it should be user configurable via some odb setting).

Nick.

> What's the best way to make these messages go away? 
> - Change the logic in db_validate_and_repair_key_wlocked() to not worry if keys are 10+ years old? 
> - Write a script to "touch" all the old keys so they've been modified recently?
> - Something else?

The function db_validate_and_repair_key_wlocked() has been written by KO so he should reply here.

In my opinion, I would go with the first one. Changing the function is easier than to write a script
and teach everybody how to use it. This would be one more thing not to forget.

Now changing the function is not so obvious. We could extend the check to let's say 20 years, but
then we meet here again in ten years. Maybe the best choice would be to just check that the time
is not in the future.

Anyhow, most people don't realize, but we all will have fun on Jan 19, 2038, when the Unix time
overflows in 32-bit signed integers. I don't know if midas will be around by then (I will be 74 years),
but before that date one has to worry about many places in midas where we use Unix time. At that time
your date stamps from 2013 would be 25 years old, so we either remove the date check (just keep
the check of not being in the future), or extend it to 26 years.

Stefan

We have an experiment that's been running for a long time and has some ODB keys that haven't been touched in ages. Mostly related to features that we don't use like the elog and lazylogger, or things that don't change often (like the logger data directory).

When we start any program, we now got dozens of error messages in the log with lines like:
hkey 297088, path "/Elog/Display run number", invalid pkey->last_written time 1377040124

That timestamp is reasonable though, as the experiment was set up in 2013!

What's the best way to make these messages go away? 
- Change the logic in db_validate_and_repair_key_wlocked() to not worry if keys are 10+ years old? 
- Write a script to "touch" all the old keys so they've been modified recently?
- Something else?

I fixed both in the current version, so please give it a try.

Stefan

This part of the system has been designed by KO, so he should reply here.

Stefan

I have two more questions related to Units, Format for Equipment/Settings:

1) It looks as if I can have units per channel only for the Input/Output channels but not for Demand/Measured channels. 
For instance we do have HV FE which collect devices with kV and V demand settings. It looks like this is not possible (see attachment) to have per channel units.
Is this right, or do I miss something here?

2) This new functionality needs entries under /Equipment/<eq-name>/Settings. The class driver generates the necessary structures if they are missing at the startup
of the scfe. It would be nice that the new, additional entries would be generate as well: Editable, Unit Input, Unit Format, etc. Perhaps optionally, if a DD is providing it?

Best,
  Andreas 

Great! This is it.
Sorry that I missed it in the docu.

Best,
  Andreas

> Have you updated to the current midas version? This issue has been fixed a while ago. 

Hi Stefan, thanks a lot! I pulled from the head, and the scrolling works now. -- regards, Pasha

Dear experts,
         I would like to have some clarification about the meaning and use of the 
tags in the ODB under /History/Tags.

I noticed that, if a history plot is created, but the name of the corresponding 
variable is changed later and the plot is modified accordingly, the old name 
persists in the /History/Tags list along with the new one. So, it appears in the 
list of variables when a new history plot is created.

It seems not to compromise the functionalities of the history system, but it is 
prone to create confusion.

Is it the expected behavior? What is the correct procedure to follow if the name 
of a variable has to be changed?

Thank you,
     Francesco

> 1) In the attached snapshot you see that the values shown from our vacuum Pirani and Penning cells are all zero, which of course is not true.
> It would be nice to have under the equipment settings some formatting options, like the possibility to add units.

You have a 

  /Equipment/LEMVAC/Settings/Format Input

array where you can specify the format for every value. Default is "%f2" for two digits after the period. For vacuum levels you might want to 
consider "%e3" which give you exponential format with three significant digits. The "format" setting is described at

  https://daq00.triumf.ca/MidasWiki/index.php//Equipment_ODB_tree#Format_%3Cvariable%3E

and the details are at

  https://daq00.triumf.ca/MidasWiki/index.php/Custom_Page#Formatting

The was a bug with the format handling, so please pull the current develop branch.


> 2) If one of the number evaluates to Infinity, the table is not shown properly anymore.

I fixed that as well in the current version.

Best,
Stefan

Hi,

I like the new eqtable, but stumbled over some issues.

1) In the attached snapshot you see that the values shown from our vacuum Pirani and Penning cells are all zero, which of course is not true.
It would be nice to have under the equipment settings some formatting options, like the possibility to add units.

2) If one of the number evaluates to Infinity, the table is not shown properly anymore.

Best,
  Andreas

Have you updated to the current midas version? This issue has been fixed a while ago. Below 
you see a screenshot of a long list scrolled all the way to the bottom.

Revision: Thu Dec 7 14:26:37 2023 +0100 - midas-2022-05-c-762-g1eb9f627-dirty on branch 
develop

Chrome on MacOSX 14.2.1

The fix is actually in "controls.js", so make sure your browser does not cache an old 
version of that file. I usually have to clear my browser history to get the new file from 
mhttpd.

Best regards,
Stefan

Dear all,

I have a "slow control" frontend which reads out 100 slow control parameters.
When I'm interactively adding a parameter to a history plot, 
a nice "Add history variable" pops up .. , but with 100 parameters in the list, 
it doesn't fit within the screen... 

The browser becomes passive, and I didn't find any easy way of scrolling.

In the attached example, adding a channel 32 variable becomes rather cumbersome, 
not speaking about channel 99.

Two questions:

a) how do people get around this "no-scrolling" issue? - perhaps there is a workaround

b) how big of a deal is it to add a scroll bar to the "Add history variables" popup ? 
   - I do not know javascript myself, but could find help to contribute..

-- many thanks, regards, Pasha

We switched from the history files from MIDAS to FILE, so we have *.dat files now (per variable), instead of the old *.hst. 

How shoul
d one now extract data from these data files? With the old *,hst files I can e.g. mhdump -E 102 231010.hst 

but with the new *.dat files I get

...2023/history$ mhdump -E 0 -T "Run number" mhf_1697445335_20231016_run_transitions.dat | head -n 15
event name: [Run transitions], time [1697445335]
tag: tag: /DWORD 1 4 /timestamp
tag: tag: UINT32 1 4 State
tag: tag: UINT32 1 4 Run number
record size: 12, data offset: 1024
record 0, time 1697557722, incr 112387
record 1, time 1697557783, incr 61
record 2, time 1697557804, incr 21
record 3, time 1697557834, incr 30
record 4, time 1697557888, incr 54
record 5, time 1697558318, incr 430
record 6, time 1697558323, incr 5
record 7, time 1697558659, incr 336
record 8, time 1697558668, incr 9
record 9, time 1697558753, incr 85

not very intelligible

Yes, I can do csv export on the webpage. But it would be nice to be able to extract from just the files. Also, the webpage export only saves the data shown ( range limited and/or downsampled)

> Hi Stefan, thanks a lot !
> 
> I just thought that for the EQ_SLOW type equipment calls to sleep() could be hidden in mfe.cxx 
> and handled based on the requested frequency of the history updates.

Most people combine EQ_SLOW with EQ_POLLED, so they want to read out as quickly as possible. Since 
the framework cannot "guess" what the users want there, I removed all sleep() in the framework.



> Doing the same in the user side is straighforward - the important part is to know where the 
> responsibility line goes (: smile :) 


Pushing this to the user gives you more freedom. Like you can add sleep() for some frontends, but not 
for others, only when the run is stopped and more.

Stefan

Hi Stefan, thanks a lot !

I just thought that for the EQ_SLOW type equipment calls to sleep() could be hidden in mfe.cxx 
and handled based on the requested frequency of the history updates.

Doing the same in the user side is straighforward - the important part is to know where the 
responsibility line goes (: smile :) 

-- regards, Pasha

Put a 

  ss_sleep(10);

into your frontend_loop(), then you should be fine.

The event loop runs as fast as possible in order not to miss any (triggered) event, so no seep in the 
event loop, because this would limit the (triggered) event rate to 100 Hz (minimum sleep is 10 ms). 
Therefore, you have to slow down the event loop manually with the method described above.

Best,
Stefan

Dear all,

I have implemented a number of slow control frontends which are directed to update the 
history once in every 10 sec, and they do just that. 

I expected that such frontends would be spending most of the time sleeping and waking up 
once in ten seconds to call their respective drivers and send the data to the server. 

However I observe that each frontend process consumes almost 100% of a single core CPU time 
and the frontend driver is called many times per second. 

Is that the expected behavior ?

So far, I couldn't find the place in the system part of the frontend code (is that the right 
place to look for?) which regulates the frequency of the frontend driver calls, so I'd greatly 
appreciate if someone could point me to that place.

I'm using the following commit:

commit 30a03c4c develop origin/develop Make sure line numbers and sequence lines are aligned.

-- many thanks, regards, Pasha

> I found the first issue: The link to
> https://midas.triumf.ca/MidasWiki/index.php/Custom_plots_with_mplot

fixed.

https://midas.triumf.ca/Custom_plots_with_mplot

also works.

I tried to get rid of redirect to daq00 completely and make the whole MidasWiki show up 
under midas.triumf.ca, but discovered/remembered that I cannot do this without changing 
MidasWiki config [$wgServer = "https://daq00.triumf.ca";] which causes mediawiki to 
redirect everything to daq00 (using the 301 "moved permanently" reply, ouch!). In theory, 
if I change it to "https://midas.triumf.ca" it will redirect everything there instead, 
but I am hesitant to make this change. It has been like this since forever and I have no 
idea what else will break if I change it.

K.O.

> > git pull
> > git submodule update
> 
> confirmed. just run into this myself. I think "make" should warn about out of 
> date git modules. Also check that the build git version is tagged with "-dirty".
> 
> K.O.

The submodule business becomes kind of annoying. I updated the documentation at

https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux#MIDAS_Package_Installatio
n

to tell people to use 

1) "git clone ... --recurse-submodules" during the first clone
2) "git submodule update --init --recursive" in case they forgot 1)
3) "git pull --recurse-submodules" for each update or to use
4) "git config submodule.recurse true" to make the --recurse-submodules the default

I use 4) since a while and it works nicely, so one does not have to remember to pull 
recursively each time.

Stefan