> > > > > > cmake ../ -DCMAKE_INSTALL_PREFIX=/usr/local/midas
> > > > > > Is the cmake setup not relocatable? This is new and was working until recently:
> > > > > Not relocatable. This is because we do not install the header files.
> > > > 
> > > > We do it this way, since the lib and bin needs to be in a place where standard users have no access to. 
> > > 
> > > hmm... i did not get this. "needs to be in a place where standard users have no access to". what do you
> > > mean by this? you install midas in a secret location to prevent somebody from linking to it?
> > > 
> > 
> > This was a wrong wording from my side. We do not want the the users have write access to the midas installation libs and bins.
> > I have submitted the pull request which should resolve this without interfere with your usage.
> > Hope this will resolve the issue.
> 
> Excellent. I think it is good to have midas "install" in a sane manner.
> 
> But I still struggle to understand what you do. Presumably you can "install" midas
> in the "midas account", which is not writable by the experiment and user accounts.
> Then it does not matter if you "install" it in it's build directory (like we do)
> or in some other location (like you do now).
> 
> This does not work of course if you only have one account, so do you build midas
> as root? or install it as root?
> 

We work the following way: there is a production Midas under let's say /usr/local/midas (make install as sudo/root). This is for the running experiment. Since we are doing muSR, we 
have experiments on a daily base, rather than month and years as it is the case for a particle physics experiment. Now, still we would like to test updates, new features of Midas on 
the same machine. For this we us the repo directly. If we are happy with the new feature, and fixes, we again do a 'make install' and hence freeze for the production a specific 
snapshot. Of course we could use various local copies of the Midas repo, but over the last years this approach was very convenient and productive. Hope this explains a bit better 
why we want to work with a CMAKE_INSTALL_PREFIX.

AS

Dear Konstantin,

I have tried your adopted version. You did already quite a job which is more consistent than what I was suggesting.
Yet, I still have a problem (git sha2 2d3872dfd31) when starting on a clean system (i.e. no midas present yet): 
Without CMAKE_INSTALL_PREFIX set, everything is fine. 
However, when setting CMAKE_INSTALL_PREFIX, I get the following error message on the build level (cmake --build ./ -- VERBOSE=1) from the manalyzer:

[ 32%] Building CXX object manalyzer/CMakeFiles/manalyzer.dir/manalyzer.cxx.o
cd /home/l_musr_tst/Tmp/midas/build/manalyzer && /usr/bin/c++  -DHAVE_FTPLIB -DHAVE_MIDAS -DHAVE_ROOT_HTTP -DHAVE_THTTP_SERVER -DHAVE_TMFE -DHAVE_ZLIB -D_LARGEFILE64_SOURCE -I/home/l_musr_tst/Tmp/midas/manalyzer -I/usr/local/root/include  -O2 -g -Wall -Wformat=2 -Wno-format-nonliteral -Wno-strict-aliasing -Wuninitialized -Wno-unused-function -std=c++11 -pipe -fsigned-char -pthread -DHAVE_ROOT -std=gnu++11 -o CMakeFiles/manalyzer.dir/manalyzer.cxx.o -c /home/l_musr_tst/Tmp/midas/manalyzer/manalyzer.cxx
In file included from /home/l_musr_tst/Tmp/midas/manalyzer/manalyzer.cxx:14:0:
/home/l_musr_tst/Tmp/midas/manalyzer/manalyzer.h:13:21: fatal error: midasio.h: No such file or directory
 #include "midasio.h"
                     ^
compilation terminated.

Obviously, still some include paths are missing. I tried quickly to see if an easy fix is possible, but I failed.

Question: is it possible to use manalyzer without midas? I am asking since the MIDAS_FOUND flag is confusing me.

> big thanks to Andreas S. for getting most of this figured out. I now understand
> much better how cmake installs things and how it generates config files, both
> find_package(midas) style and install(export) style.
> 
> with the latest updates, CMAKE_INSTALL_PREFIX should work correctly. I now understand how it works,
> how to use it and how to test it, it should not break again.
> 
> for posterity, my commends to Andreas's pull request:
> 
> thank you for providing this code, it was very helpful. at the end I implemented things slightly differently. It took me a while to understand that I have to provide 2 “install” modes, for your case, I need to 
> “install” the header files and everything works “the cmake way”, for our normal case, we use include files in-place and have to include all the git submodules to the include path. I am quite happy with the 
> result. K.O.
> 
> K.O.

midas version used: midas-2019-05-cxx-1461-g906be8b

I find in the systemd log every couple of days/weeks the following error message related to the mhttpd:

[mhttpd,ERROR] [mhttpd.cxx:18886:on_work_complete,ERROR] Should not send response to request from socket 28 to socket 26, abort!

with various socket numbers of course.

Can anybody hint me what is going wrong here?

The bad thing on the crash is, that sometimes it is leading to a "chain-reaction" killing multiple midas frontends, which essentially stop the experiment.

Help would be very much appreciated!

Andreas 

Dear Konstantin,

thanks for the prompt response, this helps a lot!

> 1) If you see a way to replicate this crash, or some way to reliably cause
> the crash within 5-10 minutes after starting mhttpd, please let me know. I can work with that
> and I wish to fix this problem very much.

I wished I could! This happens 3-4 times per year only, so close to impossible to trigger.

> 2) My "wrong socket" check calls abort() to produce a core dump. In my experience these core dumps
> are useless for debugging the present problem. There is just no way to examine the state of each
> thread and of each http request using gdb by hand.
> 
> 3) this abort() causes linux to write a core dump, this takes a long time and I think it causes
> other MIDAS program to stop, timeout and die. You can try to fix this by disabling core dumps (set "enable core dumps"
> to "false" in ODB and set core dump size limit to 0), or change abort() to exit(). (You can also disable
> the "wrong socket" check, but most likely you will not like the result).
> 

I changed now to exit() rather than abort on the production machine. Perhaps this should be the default?

Andreas

Hi Stefan and Zaher,

there is a problem with the new sequencer interface for midas.

If I understand the msequencer code correctly:
Under '/Sequencer/State/Path' the path can be defined from where the msequencer gets the files, generates the xml, etc.
However, the new javascript code reads/writes the files to '<exp>/userfiles/sequencer/'

If the path in the ODB is different to '<exp>/userfiles/sequencer/', it leads to quite some unexpected behavior. If '<exp>/userfiles/sequencer/' is the place where things should go, the ODB entry of the msequencer and the internal handling should probably adopted, no?

Andreas

> Dear beloved MIDAS users,
> 
> I'm happy to announce a "holiday update" for MIDAS. In countless hours, Zaher from 
> PSI worked hard to introduce syntax highlighting in the midas script editor. In 
> addition, there are additional features like a cleaner user interface, the option 
> to see all variables also in non-debug mode and more. Have a look at the picture 
> below, doesn't it beginning to look a lot like Christmas?
> 
> We have tested this quite a bit and went through many iterations, but no guarantee 
> that it's flawless. So please report any issue here.
> 
> I wish you all a happy holiday season,
> Stefan

> > If I understand the msequencer code correctly:
> > Under '/Sequencer/State/Path' the path can be defined from where the msequencer gets the files, generates the xml, etc.
> > However, the new javascript code reads/writes the files to '<exp>/userfiles/sequencer/'
> > 
> > If the path in the ODB is different to '<exp>/userfiles/sequencer/', it leads to quite some unexpected behavior. If '<exp>/userfiles/sequencer/' is the place where things should go, the ODB entry of the msequencer and the internal handling should probably adopted, no?
> 
> Indeed there is a change in philosophy. Previously, /Sequencer/State/Path could point anywhere in the file system. This was considered a security problem, since one could access system files under /etc for example via the midas interface. When the new file API was 
> introduced recently, it has therefor been decided that all files accessible remotely should reside under <exp>/userfiles. If an experiment needs some files outside of that directory, the experiment could define some symbolic link, but that's then in the responsibility of 
> the experiment. 
> 
> To resolve now the issue between the sequencer path and the userfiles, we have different options, and I would like to get some feedback from the community, since *all experiments* have to do that change.
> 
> 1) Leave thins as they are, but explain that everybody should modify /Sequencer/Stat/Path to some subdirectory of <exp>/userfiles/sequencer
> 
> 2) Drop /Sequencer/State/Path completely and "hard-wire" it to <exp>/usefiles/sequencer
> 
> 3) Make /Sequencer/State/Path relative to <exp>/userfiles. Like if /Sequencer/State/Path=test would then result to a final directory <exp>/userfiles/sequencer/test
> 
> I'm kind of tempted to go with 3), since this allows the experiment to define different subdirectories under <exp>/userfiles/sequencer/... depending on the situation of the experiment.
> 
> Best,
> Stefan

For me the option 3) seems the most coherent one.
Andreas

Hi,

I like the new eqtable, but stumbled over some issues.

1) In the attached snapshot you see that the values shown from our vacuum Pirani and Penning cells are all zero, which of course is not true.
It would be nice to have under the equipment settings some formatting options, like the possibility to add units.

2) If one of the number evaluates to Infinity, the table is not shown properly anymore.

Best,
  Andreas

Great! This is it.
Sorry that I missed it in the docu.

Best,
  Andreas

I have two more questions related to Units, Format for Equipment/Settings:

1) It looks as if I can have units per channel only for the Input/Output channels but not for Demand/Measured channels. 
For instance we do have HV FE which collect devices with kV and V demand settings. It looks like this is not possible (see attachment) to have per channel units.
Is this right, or do I miss something here?

2) This new functionality needs entries under /Equipment/<eq-name>/Settings. The class driver generates the necessary structures if they are missing at the startup
of the scfe. It would be nice that the new, additional entries would be generate as well: Editable, Unit Input, Unit Format, etc. Perhaps optionally, if a DD is providing it?

Best,
  Andreas 

Currently one has to set the required flag in the ODB (e.g., /Programs/Logger/Required) to "y" for the program 
to appear on the "Programs page" and being able to start and stop the program easily.

However, if one wants to run with the "Prevent start on required progs" in /Experiment enabled, all the 
programs in the "Programs page" need to be running and one cannot have one of them stopped while still 
taking a run.

It would be nice to separate these two functionalities: Have a flag that makes the program appear on the 
"Programs page" and have a flag that controls the "Prevent start on required frogs" functionality.

Hi,

I don't know if this actually fits the Bug Report category. I've been trying to install Midas on my Mac OS 
Mavericks and I keep getting errors like "conflicting types for '___builtin____strlcpy_chk' ..." and similarly for 
strlcat. I googled a bit and I think the problem might be that in Mavericks strlcat and strlcpy are already 
defined in string.h, and so there might be a redundant definition somewhere. I'm not sure what the best 
way to fix this would be though. Any help would be appreciated.

Thanks,

Andre

> > 
> > I don't know if this actually fits the Bug Report category. I've been trying to install Midas on my Mac OS 
> > Mavericks and I keep getting errors like "conflicting types for '___builtin____strlcpy_chk' ..." and similarly for 
> > strlcat. I googled a bit and I think the problem might be that in Mavericks strlcat and strlcpy are already 
> > defined in string.h, and so there might be a redundant definition somewhere. I'm not sure what the best 
> > way to fix this would be though. Any help would be appreciated.
> > 
> 
> We have run into this problem - MacOS 10.9 plays funny games with definitions of strlcpy() & co - and it has been fixed since last Summer.
> 
> For the record, current MIDAS builds just fine on MacOS 10.9.2.
> 
> For a pure test, try the instructions posted at midas.triumf.ca:
> 
> cd $HOME
> mkdir packages
> cd packages
> git clone https://bitbucket.org/tmidas/midas
> git clone https://bitbucket.org/tmidas/mscb
> git clone https://bitbucket.org/tmidas/mxml
> cd midas
> make
> 
> K.O.

Thanks, it works like a charm now! I must have obtained an outdated version of Midas.

Andre

Hello,

I'm wondering if it would be possible to add the ability to lock ODB variables as 
a sequencer command.

The "Lock when running" directory in the ODB /Experiment tree seems to apply only 
during a run - I'd like a way to lock a variable outside a run.

Is this possible within the sequencer?  Or have I overlooked existing 
functionality?

Thanks!

Amy

We're using the lazylogger to trigger a script that copies files, and the lag 
between a completed file appearing and the lazylogger trigger occasionally feels 
uncomfortably long.  It's not too bad - at most, around five or so minutes.  But 
of course it's tough to be patient when you're waiting to look at data.

The settings for our lazylogger specify a 'Stay behind' of zero and a 'Period' of 
zero.

Is there a way to make the lazylogger less lazy?  What determines the time 
between the appearance of a file and the lazylogger trigger?

We're using mhttpd for calls that end up working better with asynchronous requests, and we've built up sort of a parallel, asynchronous library using javascript Promises.

The Promises (which are in the ES6 spec) have worked incredibly well for building well-behaved, sequential calls to mhttpd.  Personally, I also find their syntax much easier to wrap my
head around, especially compared to callbacks.

I'd be happy to add these functions to midas.js if there's general interest. 

> If using a synchronous AJAX call, such as "foo=ODBGet("/runinfo/state");", google chrome will prints this to the javascript console:
> 
> "Synchronous XMLHttpRequest on the main thread is deprecated because of its detrimental effects to the end user's experience. For more help, check http://xhr.spec.whatwg.org/."
> 
> The referenced URL has this text:
> 
> "Synchronous XMLHttpRequest outside of workers is in the process of being removed from the web platform as it has detrimental effects to the end user's experience. (This is a long 
> process that takes many years.) Developers must not pass false for the async argument when the JavaScript global environment is a document environment. User agents are strongly 
> encouraged to warn about such usage in developer tools and may experiment with throwing an InvalidAccessError exception when it occurs."
> 
> Then jQuery say this: http://api.jquery.com/jquery.ajax/
> 
> "As of jQuery 1.8, the use of async: false with jqXHR ($.Deferred) is deprecated; you must use the success/error/complete callback options instead of the corresponding methods of the 
> jqXHR object such as jqXHR.done() or the deprecated jqXHR.success()."
> 
> This sounds rather severe but one must flow with the flow. Synchronous RPC is out, async is in.
> 
> Many of the old MIDAS AJAX functions are fully synchronous (i.e. "foo=ODBGet("/blah");"), some more recent ones support both sync and async use (i.e. ODBMCopy()).
> 
> All the newly added functions *must* by async-only. For example, all the new JSON-RPC functions are async-only and require the use of callbacks to get at the data.
> 
> Converting existing javascript custom pages from sync AJAX (hah! it's SJAX, not AJAX) will require some work, and one might as well start today.
> 
> Personally, I think this excessive use of callbacks for all javascript web page programming is an unnecessary PITA, but I also do understand the motivation
> of people who write web browsers and javascript engines - removal of support for synchronous RPC makes many things much simpler -
> and even small speedup of javascript execution and better browser efficiency is welcome improvements (but not free improvements - as old web pages need to be converted).
> 
> K.O.

When using the sequencer to start and stop runs which use a deferred transition,
the sequencer fails with a "Cannot stop run: ..." error.

Checking for the "CM_DEFERRED_TRANSITION" case in the first-pass block of the
'Stop' code in sequencer.cxx is one way to solve the problem - though there may
well be better solutions. 

My edited portion of sequencer.cxx is below.  Is this an acceptable solution
that could be introduced to the master branch?

} else if (equal_ustring(mxml_get_value(pn), "Stop")) {
    if (!seq.transition_request) {
       seq.transition_request = TRUE;
       size = sizeof(state);
       db_get_value(hDB, 0, "/Runinfo/State", &state, &size, TID_INT, FALSE);
       if (state != STATE_STOPPED) {
          status = cm_transition(TR_STOP, 0, str, sizeof(str), TR_MTHREAD |
TR_SYNC, TRUE);
          if (status == CM_DEFERRED_TRANSITION) {
             // do nothing
          } else if (status != CM_SUCCESS) {
             sprintf(str, "Cannot stop run: %s", str);
             seq_error(str);
          }
       }
    } else {
       // Wait until transition has finished
       size = sizeof(state);
       db_get_value(hDB, 0, "/Runinfo/State", &state, &size, TID_INT, FALSE);
       if (state == STATE_STOPPED) {
          seq.transition_request = FALSE;

          if (seq.stop_after_run) {
             seq.stop_after_run = FALSE;
             seq.running = FALSE;
             seq.finished = TRUE;
             cm_msg(MTALK, "sequencer", "Sequencer is finished.");
          } else
             seq.current_line_number++;

          db_set_record(hDB, hKeySeq, &seq, sizeof(seq), 0);
       } else {
         // do nothing
       }
    }
}

> Why don't you post the functions here so that we can have a look? 

Here is (1) my promisified HTTP request function and (2) a function that uses the returned promises to build an asynchronous, sequential chain of requests to Midas.

Note that if something seems ugly, it's likely because I didn't take the time to clean it up, and not because it particularly *needs* to be ugly.

###### promisified HTTP request ######
In addition to promisifying HTTP requests to Midas, I wanted the Promise.resolve from this function to always return valid JSON.  I also wanted the promise to reject if the response from mhttpd indicated
failure - so that we wouldn't have to rewrite this error checking throughout the code.  The function is so long becuase we make many different calls to mhttpd, and most of them need custom error checking
and, if successful, response packaging.

// begin cdms.daq.utilities.get()
cdms.daq.utilities.get = function(url) {
  return new Promise(function(resolve, reject) {
    // XHR request
    var req = new XMLHttpRequest();
    req.open('GET',url);
 
    req.onload = function() {
      //console.log('done with ', url);
      if(req.status == 200 || req.status == 302) {
        // 'http://dcrc01.triumf.ca:8081/?cmd=jcopy&odb=CustomScript/nonexistent&encoding=json'
        // 'http://dcrc01.triumf.ca:8081/?cmd=jkey&odb=CustomScript/nonexistent'
        // both return <DB_NO_KEY>
        if(/DB_NO_KEY/gi.test(req.response)) {
          reject(req.response);
      
        // 'http://dcrc01.triumf.ca:8081/?cmd=jkey&odb=CustomScript/nonexistent&encoding=json' 
        // returns {"/error": 312}
        } else if(/error.+:\s*\d+/.test(req.response)) {
          reject('<DB_NO_KEY>');
 
        // attempting to start (or stop) a run when a run is already started (or stopped) with
        // 'http://dcrc01.triumf.ca:8081/?cmd=stop' 
        // returns ...<title>MIDAS error</title></head><body><H1>Run is not running</H1>...
        } else if(/MIDAS error/i.test(req.response)) {
          var error_str = /<H1>(.*)<\/H1>/i.exec(req.response);
          reject(error_str[0]);
 
        // 'http://dcrc01.triumf.ca:8081/?cmd=jcreate&odb=/test/foo2&type=7&encoding=json'
        // returns either 1 (creation successful) or 311 (already exists)
        } else if(/jcreate/i.test(url) && (req.response=='1' || req.response=='311')) {
          resolve({'success': true});
 
        // 'http://dcrc01.triumf.ca:8081/?cmd=jset&odb=/test/foo2&val=9&encoding=json'
        // returns OK
        } else if(/jset/i.test(url) && (req.response=='OK')) {
          resolve({'success': true});
 
        // http://dcrc01.triumf.ca:8081/SEQ/?cmd=Load+Script
        // returns an html page showing all available sequencer files
        } else if(/SEQ.*cmd=Load.+Script/i.test(url)) {
          console.log('match Seq load script command url');
          fileList = req.response.match(/\w+.msl/gi);
          resolve({'success': true, 'files': fileList});
 
        // http://dcrc01.triumf.ca:8081/SEQ/?cmd=jmsg&n=10
        // returns 10 most recent messages
        } else if(/.*cmd=jmsg/i.test(url)) {
          console.log('match command url to get messages from mlogger');
          //console.log(req.response);
          resolve({'success': true, 'messages': req.response});
 
        // http://dcrc01.triumf.ca:8081/SEQ/?fs=testflash.msl&dir=&cmd=Load
        // returns <html>redir</html>
        } else if(/SEQ.+fs=\w+.msl&.*cmd=Load/i.test(url)) {
          resolve({'success': true});
 
        // http://dcrc01.triumf.ca:8081/SEQ/?cmd=Start+Script&params=1
        // returns a status of 302 but no response
        } else if(/SEQ.+\?cmd=Start.+Script/i.test(url)) {
          resolve({'success': true});
 
        // http://dcrc01.triumf.ca:8081/?customscript=XYZ&redir=.
        // returns a status of 302 but no response
        // although the redir causes a network call to
        // (in this case) the Midas home page,
        // and that seems to be the req.response
        } else if(/redir/i.test(url)) {
          resolve({'success': true});
 
        // all other responses should be valid JSON
        } else {
          try {
            var json_obj = JSON.parse(req.response);
 
            if(json_obj && typeof json_obj === "object" && json_obj !== null){
              resolve(json_obj);
            }
          } catch(err) {
            console.log('url is ',url);
            console.log('response is ',req.response);
 
            alert(err);
            reject(err);
          }
      }
    } 
    };
     
    req.onerror = function() {
      reject(Error("Network Error"));
    };
 
    req.send();
    //console.log('request to ', url);
  });
}; // end cdms.daq.utilities.get()


###### using promisified HTTP request ######
This is an excerpt that attempts to 
(1) run a script on the DAQ computer, producing a sequencer file
(2) check that the script is completed
(3) load the sequencer file
(4) run the sequencer

Failures on any step jump to the catch, which prints the error on screen.

These are HTTP calls, and given my buggy network should be asynchronous.  At the same time, each of these steps should happen only after its predecessor is completed.  To force sequential execution,
functions within a .then() clause return a Promise object. 

// set the argument string for {{scriptname}}
// then run {{scriptname}}
// check the message log until the success of the script is verified
// check that the sequencer sees the expected file (not implemented!)
// then load the resulting sequencer file
// then start the sequencer
cdms.daq.utilities.get(url).then(function() {
  // call customscript
  var cmd_str = '?customscript=' + scriptName_str + '&redir=.';
  return cdms.daq.utilities.get(baseURL_str + cmd_str);
}).then(function() {
  return checkScriptLoop(uid);
}).then(function() {
  var load_str = baseURL_str + '/SEQ/?cmd=Load+Script';
  console.log('execute promise for url ', load_str);
  return cdms.daq.utilities.get(load_str);
}).then(function() {
  var load_str = '/SEQ/?fs=' + seqFile_str + '&dir=&cmd=Load';
  console.log('execute promise for url ', load_str);
  return cdms.daq.utilities.get(baseURL_str + load_str);
}).then(function() {
  var startSeq_str = '/SEQ/?cmd=Start+Script&params=1';
  console.log('execute promise for url ', startSeq_str);
  return cdms.daq.utilities.get(baseURL_str + startSeq_str);
}).catch(function(error) {
  alert(error);
}).then(function() {
  window.frames['flash-frame'].location = baseURL_str + '/SEQ/';
});

> I checked again on browser compatibility:
> 
> el6: firefox 38 - ok, google-chrome 27 - no
> el7: firefox 38 - ok, google-chrome 46 - ok
> ubuntu: firefox 42 - ok
> 
> mac os, windows - we say "latest firefox or google-chrome is required", then - ok
> 
> So we are probably okey with using javascript Promises with MIDAS...

It looks like this does mean that people using RHEL6 won't have the option of chrome - can they update chrome?

One option is to include a polyfill library like Lie (https://github.com/calvinmetcalf/lie).

> Right now the JSON-RPC client library does not check the return status of MIDAS calls themselves, i.e. ODBGet("/nonexistant") will go to Promise.resolve() with
> the MIDAS db_find_key() status DB_NO_KEY instead of Promise.reject(). So some error handling in Promise.resolve() is still required.

> I am thinking how to make these calls go to the error handler automatically, but there is no obvious solution for ODBMGet(["/runinfo", "/nonexistant"]) - the first path
> is a success, the second is a failure, do I fail the entire transaction (i.e. with a JSON-RPC error)? Same for JSON-RPC batch transactions - if one transaction
> in the batch fails, do I Promise.reject() all of them?


Generally, I'd prefer a grouped-request like ODBMGet to return an array of
Promises.  This way, I get to decide how to handle the request responses.  While
I do have cases where I use Promise.all(...), most of my current code would want
to treat each response individually.

But as you point out, my approach differs from the Midas approach significantly.
While I've set up my queries to reject on responses like DB_NO_KEY, the function
mjsonrpc_send_request in mhttpd.js tests purely for a successful http
request.

Since ODBMGet makes a *single* http call, I'd naively lean toward having it
return a single Promise.  Presumably, one that resolves if the http request
"goes through" and rejects if the http request fails. 

My perspective may not be the useful one to consider, though.  If other users
expect an array of promises returned from ODBMGet, definitely feel free to
ignore my thoughts on the matter.

If people really want ODBMGet to return an array of promises, one way to do it
would be to have a 'get' function that only cares about the success of the http
request, and a separate 'response checking' function that validates the
response.  ODBMGet can use these two functions together to return an array of
Promises:

#########
mhttpd.js
#########
function get(url) { 
  // return a promise that resolves if the http request returns status=200
  // reject if the http request does anything else
}

function checkResponse(response) {
  // return a promise that resolves for "good" responses
  // and rejects for "bad response"
}

function ODBMGet(path_arr) {
  var url = // build url from path_arr
  
  // syntax get().then(A).catch(B) means
  // if the http request goes through, A is executed
  // if the http request fails, B is executed
  // ;
  // for get, failure means no successful reply at all
  // so ODBMGet should return an array of rejected Promises 
  get(url).then(function(response) {
    response_arr = // split the response
    return response_arr.map(checkResponse)
  }).catch(function(err) {
    return path_arr.forEach(function() {
      return Promise.reject(err)
    })
  })
}

#########
user code
#########
// here the Promises are treated individually
var response_arr = ODBMGet([path1, path2, path3])

response_arr.forEach(function(thisResponse) {
  thisResponse.then( /* do something */ )
              .catch( /* do something else */ )
})

// and here the failure of a single promise in the array
// determines the code that's executed next
var required_arr = ODBMGet([pathA, pathB, pathC])

Promise.all(required_arr).then( /* do something */ )
                         .catch( /* do something else */ )

Both the /Script and /CustomScript trees in the ODB allow users to trigger a 
script via Midas - which silently truncates command strings longer than 
256 characters.

I'd prefer that Midas place no limit on string length.  Failing that, it would be
helpful to have character limits called out in the documentation 
(https://midas.triumf.ca/MidasWiki/index.php//Script_ODB_tree#.3Cscript-name.3E_key_or_subtree,
https://midas.triumf.ca/MidasWiki/index.php//Customscript_ODB_tree).

As far as I can tell, odb.c allows arbitrarily large strings in the ODB data.  
(Although key *names* are restricted to 256 characters.)  I've submitted one 
possible version of an arbitrary-length exec_script() as a pull request 
(https://bitbucket.org/tmidas/midas/pull-requests/).

Am I misunderstanding any critical pieces?  Does Midas intentionally treat 
strings in the ODB as limited to 256 characters?