 13 Jan 2020, Konstantin Olchanski, Forum, cmake complie issues
|
Right. So the problem is mismatch in ROOT compile flags. The old Makefile build used CFLAGS from ROOT to build rmana and rmlogger, cmake uses some kind
of generic CFLAGS, so here we have it. No idea how to fix it.
|
|
14 Jan 2020, Stefan Ritt, Forum, cmake complie issues
|
Thanks for tracing the problem further down. Now I realized that the CMakeLists.txt for the ROOT analyzer did not contain the usual ROOT flags. I added
that and committed the change, so please try again. Here is the diff:
|
|
14 Jan 2020, Stefan Ritt, Forum, cmake complie issues
|
> In the past, one could use "make -k" to get past the errors caused by ROOT, everything will
> get built and installed, except for the code that failed to build.
>
|
 06 Nov 2020, Alexandr Kozlinskiy, Suggestion, cmake build fixes
|
hi,
there are several problems with current cmake build files in midas:
|
|
27 Nov 2020, Konstantin Olchanski, Suggestion, cmake build fixes
|
Hi, Alexandr, thank you for making improvements to MIDAS. I have some question
about your suggestions:
|
|
07 May 2006, Konstantin Olchanski, Bug Report, cm_register_transition gyrations
|
I am debugging a Rome-based DAQ system setup by Pierre A. (the system does not
work because of bugs in Rome).
|
|
08 May 2006, Stefan Ritt, Bug Report, cm_register_transition gyrations
|
> I am debugging a Rome-based DAQ system setup by Pierre A. (the system does not
> work because of bugs in Rome).
>
|
|
16 Dec 2004, Jan Wouters, Forum, cm_msg
|
Could someone please explain to me how cm_msg, cm_msg1, etc. all work. The
documentation is very terse.
|
|
22 Dec 2004, Stefan Ritt, Forum, cm_msg
|
> Could someone please explain to me how cm_msg, cm_msg1, etc. all work. The
> documentation is very terse.
>
|
|
14 May 2015, Konstantin Olchanski, Suggestion, checksums for midas data files
|
I am adding LZ4 and LZO compression the mlogger and as part of this work, I would like to add
computation of checksums for the midas files.
|
|
14 May 2015, Stefan Ritt, Suggestion, checksums for midas data files
|
> Any thoughts on this?
We use binary midas files now for ~20 years and never felt the necessity to put any checksums or even encryption on these files. The reason for that is |
|
15 May 2015, Konstantin Olchanski, Suggestion, checksums for midas data files
|
> > Any thoughts on this?
>
> We use binary midas files now for ~20 years and never felt the necessity to put any checksums or even encryption on these files ...
|
|
05 Oct 2016, Lee Pool, Suggestion, checksums for midas data files
|
Hi
> On one side, such checksums help me confirm that uncompressed data contents is the same as original
|
|
13 Oct 2016, Konstantin Olchanski, Suggestion, checksums for midas data files
|
Confirmed, this is a bug in mlogger. It should be creating *2* files, one with the before-compression checksum and one with the after-compression checksum.
At
least both checksums are written to midas.log, so you can grep them from there. K.O.
|
|
13 Mar 2017, Konstantin Olchanski, Suggestion, checksums for midas data files
|
> Confirmed, this is a bug in mlogger. It should be creating *2* files, one with the before-compression checksum and one with the after-compression checksum.
At
> least both checksums are written to midas.log, so you can grep them from there. K.O.
|
|
08 Jun 2010, nicholas, Forum, check out from svn
|
do: svn co svn+ssh://svn@savannah.psi.ch/afs/psi.ch/project/meg/svn/midas/trunk
midas
shows: ssh: connect to host savannah.psi.ch port 22: Connection timed out
|
|
08 Jun 2010, nicholas, Forum, check out from svn
|
> do: svn co svn+ssh://svn@savannah.psi.ch/afs/psi.ch/project/meg/svn/midas/trunk
> midas
> shows: ssh: connect to host savannah.psi.ch port 22: Connection timed out
|
|
19 Mar 2018, Andreas Suter, Suggestion, check current ODB size
|
A feature I always missed (or just missed to find in the docu) is the following:
1) It would be nice to have a command in odbedit which allows to check how full
the ODB currently is.
|
|
19 Mar 2018, Stefan Ritt, Suggestion, check current ODB size
|
> A feature I always missed (or just missed to find in the docu) is the following:
> 1) It would be nice to have a command in odbedit which allows to check how full
> the ODB currently is.
|
|
19 Mar 2018, Andreas Suter, Suggestion, check current ODB size
|
> > A feature I always missed (or just missed to find in the docu) is the following:
> > 1) It would be nice to have a command in odbedit which allows to check how full
> > the ODB currently is.
|