 16 Apr 2014, Stefan Ritt, Forum, C++11 error
|
> I am having some trouble creating a frontend that interacts with some libraries that use C++11.
>
> The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This
|
|
16 Apr 2014, Wes Gohn, Forum, C++11 error
|
> > I am having some trouble creating a frontend that interacts with some libraries that use C++11.
> >
> > The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This
|
|
17 Apr 2014, Stefan Ritt, Forum, C++11 error
|
> Thanks for the suggestion. It looks like it is instead the TRIGGER_ALL that is causing the problem. TRIGGER_ALL is defined as -1 in midas.h. If I replace
TRIGGER_ALL with 0 in the
> frontend, it compiles, but if I use -1, I get the same error. I do not think that I want my trigger mask set to 0. Do you have a suggestion of how to |
 28 Apr 2014, Tom Stuttard, Forum, Words written as zero in Midas bank
|
Hi,
I am having some trouble with the data in my Midas bank. I am filling a midas
|
|
19 May 2014, Razvan Stefan Gornea, Forum, Weird problem on new installation
|
Hello,
I have a very weird problem on a new installation of Midas running also new code. My old code was written with the CAEN VME
library and run from an older PC with a CAEN interface. I now moved to a GEFanuc V7769 with a Tundra II bridge and the frontend is using the UniverseII |
|
22 May 2014, Razvan Stefan Gornea, Forum, Weird problem on new installation
|
I reduced the parameter space a little bit and I think the problem is somewhere in the framework. What I did is first to make a short program which accesses
the ODB and I was able to access the Settings record. Everything seems to work fine, if parts or all of the record is missing then it is created automatically,
etc. |
|
26 May 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Hello,
I'm trying to get a frontend running on an arduino yun single board computer
|
|
26 May 2014, Konstantin Olchanski, Forum, Running a frontend on Arduino Yun
|
> I'm trying to get a frontend running on an arduino yun single board computer
> (cpu is Atheros AR9331 and OS is a linux derivate
> http://arduino.cc/en/Main/ArduinoBoardYun )
|
|
27 May 2014, Razvan Stefan Gornea, Forum, Weird problem on new installation
|
I investigated further this problem and this is what I think is going on. Essentially when creating the Settings key, the framework scans all the subkeys
of the parent key to see if any are open. If that's the case it then returns an error on opening the Settings key! Here are the details:
|
|
27 May 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Ok, I'm currently trying to get things running, setting up a crosscompiler toolchain for the Arduino Yun is fairly
easy, just follow the tutorial on the OpenWrt webpage.
|
|
27 May 2014, Konstantin Olchanski, Forum, Running a frontend on Arduino Yun
|
> Ok, I'm currently trying to get things running, setting up a crosscompiler toolchain for the Arduino Yun is fairly
> easy, just follow the tutorial on the OpenWrt webpage.
>
|
|
28 May 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Thank you very much for your input, it finally works. I succeeded in crosscompiling the frontend and running it on the ArduinoYun. The 64 MB RAM is more
than
enough to run the mserver and a frontend and connect to a remote midas server over ethernet or wifi.
|
|
06 Jun 2014, Alexey Kalinin, Forum, problem with writing data on disk
|
Hello,
Our experiment based on MIDAS 2.x DAQ.
I'm using several identical frontend-%d with only lam source & event id changed,
|
|
16 Jun 2014, Alexey Kalinin, Forum, problem with writing data on disk
|
Hello, once again.
What I found is when I tryed to stop the run, mlogger still working and writing some
data, that i'm sure is not right, because frontend's are in stopped state
|
18 Jun 2014, Alexey Kalinin, Forum, problem with writing data on disk 
|
Hello,
I'm in deppression.
I removed Everything from computer with mserver and reinstall system and midas.
|
|
10 Jul 2014, Clemens Sauerzopf, Forum, Adding Interrupt handling to SIS3100 driver
|
Hello,
we are using the Struck SIS 3100 VME interface for our experiment, but the midas
|
|
11 Jul 2014, Pierre-Andre Amaudruz, Forum, Adding Interrupt handling to SIS3100 driver
|
> Hello,
>
> we are using the Struck SIS 3100 VME interface for our experiment, but the midas
|
|
14 Jul 2014, Clemens Sauerzopf, Forum, Adding Interrupt handling to SIS3100 driver
|
Hi Pierre-Andre,
thanks for your comments. If I understand you correctly you are advising to separate the
|
|
15 Jul 2014, Pierre-Andre Amaudruz, Forum, Adding Interrupt handling to SIS3100 driver
|
Hello Clemens,
The hardware readout is triggered by the interrupt within this thread. The main thread poll on
|
|
16 Jul 2014, Clemens Sauerzopf, Forum, CAEN V1742 midas driver
|
Hello all,
as discussed in the thread about Interrupt triggered readout
|