 11 Mar 2014, Andreas Suter, Forum, mlogger problem
|
I stumbled over a problem which I cannot pin point and would appreciate suggestions.
I set up an experiment, and all of a sudden I noticed the following behaviour.
|
 11 Mar 2014, Stefan Ritt, Forum, mlogger problem
|
[quote="Andreas Suter"]I stumbled over a problem which I cannot pin point and would appreciate suggestions.
I set up an experiment, and all of a sudden I noticed the following behaviour.
|
|
11 Mar 2014, Andreas Suter, Forum, mlogger problem
|
[quote="Stefan Ritt"][quote="Andreas Suter"]I stumbled over a problem which I cannot pin point and would appreciate suggestions.
I set up an experiment, and all of a sudden I noticed the following behaviour.
|
|
14 Mar 2014, Konstantin Olchanski, Forum, mlogger problem
|
> I stumbled over a problem which I cannot pin point and would appreciate suggestions.
>
> [nemu@lem00 2014]$ odbedit -e nemu
|
|
17 Mar 2014, Zhi Li, Forum, [need help] simple example frontend for CAEN VX1721
|
Dear guys,
I’m Zhi Li from China, and I’m now working on my graduation project, which now
|
|
17 Mar 2014, Pierre-Andre Amaudruz, Forum, [need help] simple example frontend for CAEN VX1721
|
Hi Li,
You mention that you've got the wavedump working. It suggests that you have a A3818
|
|
17 Mar 2014, Zhi Li, Forum, [need help] simple example frontend for CAEN VX1721
|
Hi Pierre,
Thanks for your instructions. Before I run the wavedump software, I need to load a driver file for A2818, thus I think I've got this interface of A2818.
|
|
15 Apr 2014, Wes Gohn, Forum, C++11 error
|
I am having some trouble creating a frontend that interacts with some libraries that use C++11.
The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This
|
|
16 Apr 2014, Stefan Ritt, Forum, C++11 error
|
> I am having some trouble creating a frontend that interacts with some libraries that use C++11.
>
> The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This
|
|
16 Apr 2014, Wes Gohn, Forum, C++11 error
|
> > I am having some trouble creating a frontend that interacts with some libraries that use C++11.
> >
> > The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This
|
|
17 Apr 2014, Stefan Ritt, Forum, C++11 error
|
> Thanks for the suggestion. It looks like it is instead the TRIGGER_ALL that is causing the problem. TRIGGER_ALL is defined as -1 in midas.h. If I replace
TRIGGER_ALL with 0 in the
> frontend, it compiles, but if I use -1, I get the same error. I do not think that I want my trigger mask set to 0. Do you have a suggestion of how to |
|
28 Apr 2014, Tom Stuttard, Forum, Words written as zero in Midas bank
|
Hi,
I am having some trouble with the data in my Midas bank. I am filling a midas
|
|
19 May 2014, Razvan Stefan Gornea, Forum, Weird problem on new installation
|
Hello,
I have a very weird problem on a new installation of Midas running also new code. My old code was written with the CAEN VME
library and run from an older PC with a CAEN interface. I now moved to a GEFanuc V7769 with a Tundra II bridge and the frontend is using the UniverseII |
|
22 May 2014, Razvan Stefan Gornea, Forum, Weird problem on new installation
|
I reduced the parameter space a little bit and I think the problem is somewhere in the framework. What I did is first to make a short program which accesses
the ODB and I was able to access the Settings record. Everything seems to work fine, if parts or all of the record is missing then it is created automatically,
etc. |
|
26 May 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Hello,
I'm trying to get a frontend running on an arduino yun single board computer
|
|
26 May 2014, Konstantin Olchanski, Forum, Running a frontend on Arduino Yun
|
> I'm trying to get a frontend running on an arduino yun single board computer
> (cpu is Atheros AR9331 and OS is a linux derivate
> http://arduino.cc/en/Main/ArduinoBoardYun )
|
|
27 May 2014, Razvan Stefan Gornea, Forum, Weird problem on new installation
|
I investigated further this problem and this is what I think is going on. Essentially when creating the Settings key, the framework scans all the subkeys
of the parent key to see if any are open. If that's the case it then returns an error on opening the Settings key! Here are the details:
|
|
27 May 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Ok, I'm currently trying to get things running, setting up a crosscompiler toolchain for the Arduino Yun is fairly
easy, just follow the tutorial on the OpenWrt webpage.
|
|
27 May 2014, Konstantin Olchanski, Forum, Running a frontend on Arduino Yun
|
> Ok, I'm currently trying to get things running, setting up a crosscompiler toolchain for the Arduino Yun is fairly
> easy, just follow the tutorial on the OpenWrt webpage.
>
|
|
28 May 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Thank you very much for your input, it finally works. I succeeded in crosscompiling the frontend and running it on the ArduinoYun. The 64 MB RAM is more
than
enough to run the mserver and a frontend and connect to a remote midas server over ethernet or wifi.
|