 05 Nov 2020, Isaac Labrie Boulay, Forum, Building an experiment using CAEN VME interface - unknown type name 'VARIANT_BOOL'
|
Hi everyone,
I have been building an experiment using the v1718 CAEN interface to talk to my modules and I am using the CAENVMElib Linux Library (2.50). I've managed |
 05 Nov 2020, Pierre-Andre Amaudruz, Forum, Building an experiment using CAEN VME interface - unknown type name 'VARIANT_BOOL'
|
Hi,
You're building under Linux like. You want to define the LINUX and skip the VARIANT_BOOL all together.
|
|
06 Nov 2020, Isaac Labrie Boulay, Forum, Building an experiment using CAEN VME interface - unknown type name 'VARIANT_BOOL'
|
|
|
06 Nov 2020, Isaac Labrie Boulay, Forum, Building an experiment using CAEN VME interface - unknown type name 'VARIANT_BOOL'
|
Yes, you are right. That fixed it and my frontend is compiling.
Thanks Pierre-Andre.
|
|
19 Nov 2020, Joseph McKenna, Forum, History plot consuming too much memory
|
A user reported an issue that if they were to plot some history data from
|
|
19 Nov 2020, Stefan Ritt, Forum, History plot consuming too much memory
|
The history code is right now programmes in such a way that when you request
an old time window, then all data from that window until the present date
gets loaded. When we implemented that, this worked fine for data ranges of
|
|
20 Nov 2020, Joseph McKenna, Forum, History plot consuming too much memory
|
Poking at the behavior of this, its fairly clear the slow response is from the data
being loaded off an HDD, when we upgrade this system we will allocate enough SSD
storage for the histories.
|
|
20 Nov 2020, Stefan Ritt, Forum, History plot consuming too much memory
|
> Taking this down a tangent, I have a mild concern that a user could temporarily
> flood our gigabit network if we do have faster disks to read the history data. Have
> there been any plans or thoughts on limiting the bandwidth users can pull from
|
|
24 Nov 2020, Isaac Labrie Boulay, Forum, Invalid name "Analyzer/Tests"
|
Hi everyone,
I've recently took the analyzer template from $MIDASSYS/examples/experiment and
|
|
27 Nov 2020, Konstantin Olchanski, Forum, Invalid name "Analyzer/Tests"
|
> I've recently took the analyzer template from $MIDASSYS/examples/experiment and
> modified it to be able to use Roody on a very simple frontend setup.
|
|
27 Nov 2020, Konstantin Olchanski, Forum, History plot consuming too much memory
|
>
> Tested with midas-2020-08-a up until the HEAD of develop
>
|
|
27 Nov 2020, Konstantin Olchanski, Forum, History plot consuming too much memory
|
>
> With the current code, we are limited to loading history data up to 50% of
> the javascript memory limit.
|
|
27 Nov 2020, Konstantin Olchanski, Forum, History plot consuming too much memory
|
>
> Are you sure that the delay comes from the browser or actually from mhttpd
> digging through GBytes of history data?
|
|
27 Nov 2020, Konstantin Olchanski, Forum, History plot consuming too much memory
|
>
> Taking this down a tangent, I have a mild concern that a user could temporarily
> flood our gigabit network if we do have faster disks to read the history data.
|
|
27 Nov 2020, Konstantin Olchanski, Forum, Building an experiment using CAEN VME interface - unknown type name 'VARIANT_BOOL'
|
>
> The header file used to defined the CAEN types (CAENVMEtypes.h) defines 'CAEN_BOOL' like this:
>
|
|
27 Nov 2020, Konstantin Olchanski, Forum, Invalid name "Analyzer/Tests"
|
https://bitbucket.org/tmidas/midas/issues/298/invalid-odb-names-in-example-midas
K.O. |
|
01 Dec 2020, Stefan Ritt, Forum, subrun
|
There is no "mechanism" foreseen to be executed after each subrun. But you could
run a shell script after each run which loops over all subruns and converts them
one after the other.
|
|
01 Dec 2020, Ben Smith, Forum, subrun
|
We use the lazylogger for something similar to this. You can specify the path to a custom script, and it will be run for each midas file that gets written:
https://midas.triumf.ca/MidasWiki/index.php/Lazylogger#Using_a_script
This means that you don't have to wait until the end of the run to start processing.
|
|
07 Dec 2020, Isaac Labrie Boulay, Forum, Invalid name "Analyzer/Tests"
|
> https://bitbucket.org/tmidas/midas/issues/298/invalid-odb-names-in-example-midas
> K.O.
|
|
09 Dec 2020, Frederik Wauters, Forum, history and variables confusion
|
I have a fe, with 2 "equipments" (2 different types of LV supplies).
Equipment/../Setting has a "Names" key, with the actual channel names (ch1, ch2, ...) of the devices.
|