 13 May 2024, Luigi Vigani, Bug Report, Params not initialized when starting sequencer
|
[quote="Zaher Salman"]I think that I finally managed to fix the problem. The default values of the parameters are now written first in one go, then the
sequencer waits for confirmation that everything is completed before proceeding. Please test and let me know if there are still any issues.
|
|
21 May 2024, Thomas Senger, Bug Report, Params not initialized when starting sequencer
|
Hi all,
On develop, the issue seems to be still there and is not fixed.
The parameters are currently "never" correctly initialized, only as "empty". Tried several times.
|
|
21 May 2024, Zaher Salman, Bug Report, Params not initialized when starting sequencer
|
I traced the problem to a mjsonrpc_db_ls call where I read /Sequencer/Param... . It seems that this sometimes returns a status 312 (DB_NO_KEY) although
I am sure all keys are there in the ODB.
I am still trying to solve this but I may need some help on the mjsonrpc.cxx code.
|
|
21 May 2024, Zaher Salman, Bug Report, Params not initialized when starting sequencer
|
Hi Thomas,
I have a fix for the issue and I would be happy with testers if you are willing. Simply "git checkout newfeature_ZS" and give it a go. No need to recompile
anything.
|
|
22 May 2024, Thomas Senger, Bug Report, Params not initialized when starting sequencer
|
Hi Zaher,
thanks for your help.
I just tried the bug fix, but it still seems not to work properly.
|
|
30 Aug 2024, Zaher Salman, Bug Report, Params not initialized when starting sequencer
|
The issue with the parameters should be fixed now. Please test and let me know if it still happens.
[quote="Thomas Senger"]Hi Zaher,
|
|
04 Sep 2024, Lukas Gerritzen, Bug Report, Params not initialized when starting sequencer
|
I think I have had similar issues in a custom page, where I wrote values to the ODB and they were not ready when I needed them. If you found a fix to such
race conditions, could you maybe share how to properly treat this issue? If the solution reliably works, we could also consider including it in the documentation
(midaswiki or example.html).
|
|
04 Sep 2024, Zaher Salman, Bug Report, Params not initialized when starting sequencer
|
The problem here was that the JS code did not wait to msequencer to finish preparing the "/Sequencer/Param" in the ODB, so I had to change to code to wait
for "/Sequencer/Command/Load new file" to be false before proceeding.
|
 17 Dec 2008, Renee Poutissou, Bug Report, Overflow on "cm_msg" command generates segfault
|
The following error has been reported to me by T2K colleagues:
When using "odbedit -c "msg my_message", the following behavior
|
|
22 Dec 2008, Stefan Ritt, Bug Report, Overflow on "cm_msg" command generates segfault
|
> The following error has been reported to me by T2K colleagues:
>
> When using "odbedit -c "msg my_message", the following behavior
|
|
09 Jan 2013, wenliang li, Bug Report, Outputting ADC and TDC data into ROOT tree with the MIDAS SVN Revision:5347.
|
Dear Midas Experts
I am Wenliang Li, a graduate student from University of Regina. Our group have
|
|
09 Jan 2013, Stefan Ritt, Bug Report, Outputting ADC and TDC data into ROOT tree with the MIDAS SVN Revision:5347.
|
Dear Bill,
the Midas analyzer "mana.c" is currently not maintained. At PSI we use the ROME framework (which might be too complicated for a
|
27 Aug 2003, Pierre-André Amaudruz, , Operation under 1.9.3 with the analyzer 
|
1) Prior upgrading midas to 1.9.3, make sure you've saved your ODB in ASCII
format using "odbedit> save my_odb.odb", as the internal structure is
incompatible with previous version. You will be able to restore it once
|
|
06 Sep 2019, Pintaudi Giorgio, Forum, Open a hotlink to a single element in an ODB array
|
Hello!
Just a little question about the ODB hotlinks. Is it possible to open a hotlink
to a single element in and ODB array?
|
|
16 Sep 2019, Konstantin Olchanski, Forum, Open a hotlink to a single element in an ODB array
|
> Is it possible to open a hotlink to a single element in an ODB array?
Not possible.
|
|
26 Sep 2019, Stefan Ritt, Forum, Open a hotlink to a single element in an ODB array
|
[quote="Pintaudi Giorgio"]Hello!
Just a little question about the ODB hotlinks. Is it possible to open a hotlink
to a single element in and ODB array?[/quote]
|
|
27 Sep 2019, Pintaudi Giorgio, Forum, Open a hotlink to a single element in an ODB array
|
Thank you for the feedback.
I will try to use the db_watch function in the future.
I tried to look for more info about the db_watch function in the Wiki but I could not find much.
|
|
27 Sep 2019, Konstantin Olchanski, Forum, Open a hotlink to a single element in an ODB array
|
> I will try to use the db_watch function in the future.
Note that db_watch() and db_open_record() work exactly the same way, both only allow
|
|
01 Dec 2021, Lars Martin, Bug Report, Off-by-one in sequencer documentation
|
The documentation for the sequencer loop says:
<quote>
|
|
02 Dec 2021, Stefan Ritt, Bug Report, Off-by-one in sequencer documentation
|
> The documentation for the sequencer loop says:
>
> <quote>
|