Current file handling of ROME is based on run number. This way is simple and easy to understand. But 
there are some arguments on it.

(i) In case of .mid file. ROME assume the file name is like run00001.mid. But this is not always true. 
MIDAS users can have different name.

(ii) ROME saves one TTree in one file. But there are cases that user want to save several TTrees in a file

(iii) Especially rare event search experiments like MEG, one file may contain signal candidate events 
from several runs.

To solve this issue one idea is to move from run base I/O to filename base I/O.

* Input
Users may specify filename instead of run number with command line option like.
XXXanalyzer.exe -f run00001.mid,run00002.mid

Then ROMEAnalyzer provides information of filename to DAQ class.

How files are handled is depending on DAQ class. Normally each files will be read one by one.
But in case of bartender program, they will be read in parallel to mix.

In case of .mid file, run number is written in run header of files.
ROMEMidas should change current run number at the BeginOfRun.

* Output
For the output filename we can employ same technique as database path.
This way users can use also run number and some other parameters.
And they can store several TTrees in a file.

  <Tree>
      <TreeName>tree</TreeName>
      <TreeOutputFileName>"%s#.root",gAnalyzer->GetGSP()->GetFilePrefix()<TreeOutputFileName>
      <Branch>
        <BranchName>kine</BranchName>
        <RelatedFolder>Kinematics</RelatedFolder>
      </Branch>
  </Tree>
 

This change is quite big, and it affects all ROME users.
We have to discuss enough on it before changing.

(One choice is to remain run number base I/O.)

About configuration XML files.

Now we merged ROME and ARGUS.
So I expect that users often have several configuration files for one project.

But I realized many people don't know that they can specify configuration file.

So I propose following scheme.

* When a program starts, it searches all XML files located in current directory which has <Configuration> tag at the top.
* If it does not find any XML file, it asks user to generate new one.
   * ask configuration type [R/A/M/N]
   * ask filename. Default is romeConfig.xml
* If it find only one XML file, it reads the XML file.
* If it find several XML files, it asks user which file should be used with a prompt like,
     Which configuration file do you use ?
      [1] filename1.xml
      [2] romeConfig.xml
      [3] filename2.xml
      [q] quit program
* When user starts program with option -c, it asks creates new configuration anyway.
* When user starts program with option -i, it uses specified file.

done.
Program searches configuration XML file in ./ and ./config

This is maybe a bug report that happens reading long lines in a text database.
I am currently handling large data base files for linear fit analysis, basically I have to handle a 828 x 828 
matrix. Writing in the text db 828 lines containing each 828 comma separated values with a single 
new-line at the end does not work, maybe the read buffer is too large. 
So I propose the following modification to ROMETextDataBase.cpp:
Suppose you have a field named "coefficients" which is declared "array", say of four numbers,  in the 
xml file. In the text data base it appears as:

<coefficients>
one,two,three,four
one,two,three,four
one,two,three,four
...
</coefficients>

One should be able to write the same code as follows:

<coefficients>
one,
two,
three,
four                  <----- note there is NO COMMA here!
one,
two,
three,
four
one,two,three,four
...
</coefficients>

or

<coefficients>
one,two,
three,four
one,two,three,
four
one,
two,three,four
...
</coefficients>

In this way I can write a single column of (comma separated) values. Can somebody (Ryu?) take care of 
this (I hope simple) modification?
Thanks.

 

> This is maybe a bug report that happens reading long lines in a text database.

This does not only affect ROME, but also the MXML library which has to read the long lines. I haven't carefully
checked, but I presume that MXML can handle long lines. So it might maybe be better to keep the long lines in a
text database, and modify ROME such that there is no buffer overflow. This maybe makes it easier to read the
database and to import it in programs like a spreadsheet.

I need some suggestions regarding drawing multiple histograms on the same pad in
ROME.
Here is what I have been doing.  I am making a summary histogram online dispaly
with ARGUS. The displays is gonna show multiple different types of histograms. 

So I made a module with four different types of histograms all on the same canvas,
so that I can look at them in real time in an online run.

Now in one of the histograms, I am looping over multiple banks, so in one of the
pads, I want to see two different lines of different colors (to indicate two
different histograms of the same type from two banks). 
So I used histoGUI.xml (from examples/histoGUI) and used this way of histogram
and tab declarations:
  <Tasks>
                <Task>
                        <TaskName>FillHisto</TaskName>
        <Histogram>
                                <HistName>h1_Esum</HistName>


                                <HistArraySize>2</HistArraySize>
                                <HistFolderName>myhistos</HistFolderName>
                                <HistType>TH1F</HistType>

                                <HistXLabel>ESum</HistXLabel>
                                <HistYLabel>Entries</HistYLabel>
                                <HistXNbins>300</HistXNbins>
                                <HistXmin>0</HistXmin>
                                <HistXmax>3.1</HistXmax>
</Histogram>               




<Histogram>
                                <HistName>h1_amplitude</HistName>
                                <HistFolderName>myotherhistos</HistFolderName>
                                 <HistArraySize>108</HistArraySize>


                                <HistType>TH1F</HistType>
                                <HistXLabel>Amplitude</HistXLabel>
                                <HistYLabel>Entries</HistYLabel>
                                <HistXNbins>4096</HistXNbins>
                                <HistXmin>-0.5</HistXmin>
                                <HistXmax>4095.5</HistXmax>
                                <Argus>
                                        <Tab>
                                                <TabName>GeneratedHisto</TabName>
                                              
<ObjectArrayIndex>0</ObjectArrayIndex>

                                                <Index>1</Index>
                                        </Tab>
                                </Argus>
                        </Histogram>

etc. and two other histograms have been defined in the same way.

And then in the src/task: HGUITFillHisto.cpp
I added this: (to draw two histograms on the same pad)

          if(icalo==1)
            {
          Geth1_EsumAt(0)->Fill(0.00009118*sum);

          Geth1_EsumAt(0)->SetLineColor(3);

             }

          Geth1_EsumAt(0)->Draw();

          if(icalo==2)
            {
          Geth1_EsumAt(1)->Fill(0.00009118*sum);

            }

          Geth1_EsumAt(1)->Draw("same");

And attached is the screen shot from ARGUS.

Now the problem is: when I add the Draw() and Draw("same") codes in the src/task
code, it always creates two copies of the same pad. The 0th pad and the very last
pad. So what ever is on the last pad in the attachment is being replaced by the
same copy of the 0th pad. I kept chaning the Index number in histoGUI.xml, but what
ever I do, if I try to draw two histograms on the same pad and add those codes in
the srdc/task .cpp file, it always creates two copies.

I don't know where to look at to fix the problem.

Is there any other way I can add multiple histograms on a pad, while keeping the
other pads on the canvas intact?

Any help on this issue will be much appreciated.

Hello,

First of all, the histograms are supposed to be drawn by the automatically generated code.

You don't need (and should not) draw them from a task.
If you do so, the histograms are drawn on the active pad (gPad) which is, in your case, the last pad on a tab.


I added a new feature to ROME development branch.
For using the feature, you can try
 cd $ROMESYS
 git checkout develop
 git pull
 make
 cd your_project
 make build
 make

As you can see in the updated examples/histoGUI/histoGUI.xml, a new option <DrawSamePad>true</DrawSamePad> is 
available.
When it is true, the array of histograms are drawn on the same pad.

If you have any problems, please let me know.

Best regards,

Ryu


> I need some suggestions regarding drawing multiple histograms on the same pad in
> ROME.
> Here is what I have been doing.  I am making a summary histogram online dispaly
> with ARGUS. The displays is gonna show multiple different types of histograms. 
> 
> So I made a module with four different types of histograms all on the same canvas,
> so that I can look at them in real time in an online run.
> 
> Now in one of the histograms, I am looping over multiple banks, so in one of the
> pads, I want to see two different lines of different colors (to indicate two
> different histograms of the same type from two banks). 
> So I used histoGUI.xml (from examples/histoGUI) and used this way of histogram
> and tab declarations:
>   <Tasks>
>                 <Task>
>                         <TaskName>FillHisto</TaskName>
>         <Histogram>
>                                 <HistName>h1_Esum</HistName>
> 
> 
>                                 <HistArraySize>2</HistArraySize>
>                                 <HistFolderName>myhistos</HistFolderName>
>                                 <HistType>TH1F</HistType>
> 
>                                 <HistXLabel>ESum</HistXLabel>
>                                 <HistYLabel>Entries</HistYLabel>
>                                 <HistXNbins>300</HistXNbins>
>                                 <HistXmin>0</HistXmin>
>                                 <HistXmax>3.1</HistXmax>
> </Histogram>               
> 
> 
> 
> 
> <Histogram>
>                                 <HistName>h1_amplitude</HistName>
>                                 <HistFolderName>myotherhistos</HistFolderName>
>                                  <HistArraySize>108</HistArraySize>
> 
> 
>                                 <HistType>TH1F</HistType>
>                                 <HistXLabel>Amplitude</HistXLabel>
>                                 <HistYLabel>Entries</HistYLabel>
>                                 <HistXNbins>4096</HistXNbins>
>                                 <HistXmin>-0.5</HistXmin>
>                                 <HistXmax>4095.5</HistXmax>
>                                 <Argus>
>                                         <Tab>
>                                                 <TabName>GeneratedHisto</TabName>
>                                               
> <ObjectArrayIndex>0</ObjectArrayIndex>
> 
>                                                 <Index>1</Index>
>                                         </Tab>
>                                 </Argus>
>                         </Histogram>
> 
> etc. and two other histograms have been defined in the same way.
> 
> And then in the src/task: HGUITFillHisto.cpp
> I added this: (to draw two histograms on the same pad)
> 
>           if(icalo==1)
>             {
>           Geth1_EsumAt(0)->Fill(0.00009118*sum);
> 
>           Geth1_EsumAt(0)->SetLineColor(3);
> 
>              }
> 
>           Geth1_EsumAt(0)->Draw();
> 
>           if(icalo==2)
>             {
>           Geth1_EsumAt(1)->Fill(0.00009118*sum);
> 
>             }
> 
>           Geth1_EsumAt(1)->Draw("same");
> 
> And attached is the screen shot from ARGUS.
> 
> Now the problem is: when I add the Draw() and Draw("same") codes in the src/task
> code, it always creates two copies of the same pad. The 0th pad and the very last
> pad. So what ever is on the last pad in the attachment is being replaced by the
> same copy of the 0th pad. I kept chaning the Index number in histoGUI.xml, but what
> ever I do, if I try to draw two histograms on the same pad and add those codes in
> the srdc/task .cpp file, it always creates two copies.
> 
> I don't know where to look at to fix the problem.
> 
> Is there any other way I can add multiple histograms on a pad, while keeping the
> other pads on the canvas intact?
> 
> Any help on this issue will be much appreciated.

I need some suggestions on how to write some data to a mySQL database via ROME.

I am calculating a quantity CTag and making a TGraph of CTag/event in ROME. Now
if I want to write it to a mySQL what shall I do?

From the manual I found that we can read from a database DAQ (SQL) system. That
it reads the main input data from a database. And I looked into the example 
under'rome/examples/stepbystepdbdaq'. 

But is there any way I can write the calculated CTags and Event Numbers to a SQL
database?

Thanks for any suggestion!

Dear Sudeshna

Yes, you can write,

There is an example project for showing the access to databases.
$ROMESYS/examples/dbexample/

For writing, an example is
$ROMESYS/examples/dbexample/src/tasks/RDBTWriteFolders.cpp

If you prefer to use normal SQL queries rather than using the ROME DB path. An example is,
$ROMESYS/examples/dbexample/src/tasks/RDBTMakeQuery.cpp
By using SQL query, you can do anything about DB.

More information is in wiki,
https://bitbucket.org/muegamma/rome3/wiki/Database

Best regards,

Ryu

> I need some suggestions on how to write some data to a mySQL database via ROME.
> 
> I am calculating a quantity CTag and making a TGraph of CTag/event in ROME. Now
> if I want to write it to a mySQL what shall I do?
> 
> From the manual I found that we can read from a database DAQ (SQL) system. That
> it reads the main input data from a database. And I looked into the example 
> under'rome/examples/stepbystepdbdaq'. 
> 
> But is there any way I can write the calculated CTags and Event Numbers to a SQL
> database?
> 
> Thanks for any suggestion!

Hi,

I am defining a histogram in the xml file like this:

<Histogram>
  <HistName>h2_dt_tcpgotheader</HistName>
  <HistFolderName>BC</HistFolderName>
  <HistType>TH2D</HistType>
<HistXLabel>time(us)</HistXLabel>
  <HistYLabel>Entries</HistYLabel>
  <HistXNbins>300000</HistXNbins>
  <HistXmin>-20000</HistXmin>
  <HistXmax>100000</HistXmax>
  <HistYNbins>10</HistYNbins>
  <HistYmin>0.0</HistYmin>
  <HistYmax>10</HistYmax>-->
  <Argus>
    <Tab>
      <TabName>SummaryBCBank</TabName>
      <Index>0</Index>
    </Tab>
  </Argus>
<Histogram>
  <HistName>h2_dt_tcpgotheader</HistName>
  <HistFolderName>BC</HistFolderName>
  <HistType>TH2D</HistType>
<HistXLabel>time(us)</HistXLabel>
  <HistYLabel>Entries</HistYLabel>
  <HistXNbins>300000</HistXNbins>
  <HistXmin>-20000</HistXmin>
  <HistXmax>100000</HistXmax>
  <HistYNbins>10</HistYNbins>
  <HistYmin>0.0</HistYmin>
  <HistYmax>10</HistYmax>-->
  <Argus>
    <Tab>
      <TabName>SummaryBCBank</TabName>
      <Index>0</Index>
    </Tab>
  </Argus>
</Histogram>

Now I want to add few texts and arrows on the same pad where the histogram is
being written.

I want to add this piece of code:

  TLatex title;
  title.SetTextFont(12);
  title.SetTextSize(0.03);
  title.SetNDC();


      title.SetTextColor(2);
      title.DrawLatex(0.01,0.32,"tcp header #rightarrow");
      title.SetTextColor(3);
      title.DrawLatex(0.01,0.4,"tcp data  #rightarrow");
      title.SetTextColor(4);
      title.DrawLatex(0.01,0.48,"copy to GPU #rightarrow");
      title.SetTextColor(5);
      title.DrawLatex(0.01,0.56,"GPU processing #rightarrow");
      title.SetTextColor(6);
      title.DrawLatex(0.01,0.64,"MFE start #rightarrow");
      title.SetTextColor(7);
      title.DrawLatex(0.01,0.72,"MFE stop #rightarrow");

The problem is that if I add this piece of code in the src/tasks, where I fill
in the histogram, then the problem is that this histogram replaces whatever is
on the last tab on the canvas.

As I recall that I am not supposed to add extra tabbing codes in the src codes
when I am using the <Argus> block for tabbing.

So where can I add these texts while still using <Argus> block for tabbing?

Any help might be very much appreciated.

Dear Sudeshna

Unfortunately, with the current ROME, it is not possible to insert own code when you use <Argus> blocks for 
which the source code is supposed to be generated automatically (and not editable).

If you want to do more than the automatically generated code, you can use the normal type tabs although you 
need to program it by yourself (as you program tasks).

An example is $ROMESYS/examples/midas.
In midas.xml, you can find <Tabs> section where several normal tabs are defined.
Corresponding source files will be generated in src/tabs when you run romebuilder after modifying the 
definition 
XML.

As for source files of tasks, you can edit the source files of tabs as you want.
ROMEbuilder will not overwrite the files.
You can draw any ROOT GUI objects in the tabs including text.

You can get the pointer of histograms associated to a task.
For example, in the midas example, src/tabs/MIDTADCTab.cpp, a pointer of a histogram 'ADC' of 
'FillHistogram' 
task is obtained by
  gAnalyzer->GetFillHistogramTask()->GetADCAt(i)

Please let me know if you have any problems to write code for your tabs.

Best regards,

Ryu



> Hi,
> 
> I am defining a histogram in the xml file like this:
> 
> <Histogram>
>   <HistName>h2_dt_tcpgotheader</HistName>
>   <HistFolderName>BC</HistFolderName>
>   <HistType>TH2D</HistType>
> <HistXLabel>time(us)</HistXLabel>
>   <HistYLabel>Entries</HistYLabel>
>   <HistXNbins>300000</HistXNbins>
>   <HistXmin>-20000</HistXmin>
>   <HistXmax>100000</HistXmax>
>   <HistYNbins>10</HistYNbins>
>   <HistYmin>0.0</HistYmin>
>   <HistYmax>10</HistYmax>-->
>   <Argus>
>     <Tab>
>       <TabName>SummaryBCBank</TabName>
>       <Index>0</Index>
>     </Tab>
>   </Argus>
> <Histogram>
>   <HistName>h2_dt_tcpgotheader</HistName>
>   <HistFolderName>BC</HistFolderName>
>   <HistType>TH2D</HistType>
> <HistXLabel>time(us)</HistXLabel>
>   <HistYLabel>Entries</HistYLabel>
>   <HistXNbins>300000</HistXNbins>
>   <HistXmin>-20000</HistXmin>
>   <HistXmax>100000</HistXmax>
>   <HistYNbins>10</HistYNbins>
>   <HistYmin>0.0</HistYmin>
>   <HistYmax>10</HistYmax>-->
>   <Argus>
>     <Tab>
>       <TabName>SummaryBCBank</TabName>
>       <Index>0</Index>
>     </Tab>
>   </Argus>
> </Histogram>
> 
> Now I want to add few texts and arrows on the same pad where the histogram is
> being written.
> 
> I want to add this piece of code:
> 
>   TLatex title;
>   title.SetTextFont(12);
>   title.SetTextSize(0.03);
>   title.SetNDC();
> 
> 
>       title.SetTextColor(2);
>       title.DrawLatex(0.01,0.32,"tcp header #rightarrow");
>       title.SetTextColor(3);
>       title.DrawLatex(0.01,0.4,"tcp data  #rightarrow");
>       title.SetTextColor(4);
>       title.DrawLatex(0.01,0.48,"copy to GPU #rightarrow");
>       title.SetTextColor(5);
>       title.DrawLatex(0.01,0.56,"GPU processing #rightarrow");
>       title.SetTextColor(6);
>       title.DrawLatex(0.01,0.64,"MFE start #rightarrow");
>       title.SetTextColor(7);
>       title.DrawLatex(0.01,0.72,"MFE stop #rightarrow");
> 
> The problem is that if I add this piece of code in the src/tasks, where I fill
> in the histogram, then the problem is that this histogram replaces whatever is
> on the last tab on the canvas.
> 
> As I recall that I am not supposed to add extra tabbing codes in the src codes
> when I am using the <Argus> block for tabbing.
> 
> So where can I add these texts while still using <Argus> block for tabbing?
> 
> Any help might be very much appreciated.

I wanted to add two different TGraphs (Corresponding to two calorimeters) into
the same pad.
So in the xml file I did:
<Graph>
  <GraphName>MyGraph</GraphName>
  <GraphFolderName>mygraphs</GraphFolderName>
  <GraphType>TGraph</GraphType>
<GraphArraySize>2</GraphArraySize>
  <GraphXLabel>Event no.</GraphXLabel>
  <GraphYLabel>Island no.</GraphYLabel>
  <GraphXmin>0</GraphXmin>
  <GraphXmax>10000</GraphXmax>
  <GraphYmin>0</GraphYmin>
  <GraphYmax>100000</GraphYmax>
 <Argus>
<Tab>
      <TabName>SummaryFCBank</TabName>
    <ObjectArrayIndex>0-1</ObjectArrayIndex>
      <Index>1</Index>
 <DrawSamePad>true</DrawSamePad>
    </Tab>
  </Argus>
</Graph>


And in src/tasks:
in the HGUITFillHisto.cpp code I did:
 for(int icalo=1; icalo<3; icalo++)   [For each calorimeter there is one bank, and one n_islands value from that
bank per event.]                        
    {
GetMyGraphAt(icalo-1)->SetPoint(gAnalyzer->GetCurrentEventNumber(),gAnalyzer->GetCurrentEventNumber(),n_islands);

 GetMyGraphAt(0)->SetMarkerColor(2); 

 GetMyGraphAt(1)->SetMarkerColor(3);

 ArgusHistoDisplay::SetLimits(GetMyGraphAt(icalo-1));

}

But then I get an empty pad in the tab. 
It works when I create the TGraph for only one calorimeter, using GetMyGraph().

Any help would be much appreciated.

Thanks!
Sudeshna

diff --git a/examples/histoGUI/histoGUI.xml b/examples/histoGUI/histoGUI.xml
index 3043dec..489052a 100644
--- a/examples/histoGUI/histoGUI.xml
+++ b/examples/histoGUI/histoGUI.xml
@@ -34,6 +34,7 @@
 				<GraphName>MyGraph</GraphName>
 				<GraphFolderName>mygraphs</GraphFolderName>
 				<GraphType>TGraph</GraphType>
+				<GraphArraySize>2</GraphArraySize>
 				<GraphXLabel>X</GraphXLabel>
 				<GraphYLabel>Y</GraphYLabel>
 				<GraphXmin>0</GraphXmin>
@@ -43,7 +44,9 @@
 				<Argus>
 					<Tab>
 						<TabName>GeneratedHisto</TabName>
+						<ObjectArrayIndex>0-1</ObjectArrayIndex>
 						<Index>4</Index>
+						<DrawSamePad>true</DrawSamePad>
 					</Tab>
 				</Argus>
 			</Graph>
diff --git a/examples/histoGUI/src/tasks/HGUITFillHisto.cpp b/examples/histoGUI/src/tasks/HGUITFillHisto.cpp
index 6ada840..c4dd95f 100644
--- a/examples/histoGUI/src/tasks/HGUITFillHisto.cpp
+++ b/examples/histoGUI/src/tasks/HGUITFillHisto.cpp
@@ -51,7 +51,10 @@ ClassImp(HGUITFillHisto)
 
 void HGUITFillHisto::Init()
 {
-   GetMyGraph()->SetMarkerStyle(31);
+   GetMyGraphAt(0)->SetMarkerStyle(31);
+   GetMyGraphAt(1)->SetMarkerStyle(31);
+   GetMyGraphAt(0)->SetMarkerColor(2);
+   GetMyGraphAt(1)->SetMarkerColor(4);
    GetMyGraphError()->SetMarkerStyle(8);
    GetMyGraphError()->SetMarkerColor(4);
 }
@@ -69,17 +72,23 @@ void HGUITFillHisto::Event()
    GetMyHistoAt(2)->SetLineColor(2);
    GetMyHistoAt(3)->SetLineColor(4);
    GetMyOtherHisto()->Fill(gRandom->Gaus(0,40));
-   GetMyGraph()->SetPoint(0,0,gRandom->Rndm());
-   GetMyGraph()->SetPoint(1,1,gRandom->Rndm());
-   GetMyGraph()->SetPoint(2,2,gRandom->Rndm());
-   GetMyGraph()->SetPoint(3,3,gRandom->Rndm());
-   GetMyGraph()->SetPoint(4,4,gRandom->Rndm());
+   GetMyGraphAt(0)->SetPoint(0,0,gRandom->Rndm());
+   GetMyGraphAt(0)->SetPoint(1,1,gRandom->Rndm());
+   GetMyGraphAt(0)->SetPoint(2,2,gRandom->Rndm());
+   GetMyGraphAt(0)->SetPoint(3,3,gRandom->Rndm());
+   GetMyGraphAt(0)->SetPoint(4,4,gRandom->Rndm());
+   GetMyGraphAt(1)->SetPoint(0,0,gRandom->Rndm());
+   GetMyGraphAt(1)->SetPoint(1,1,gRandom->Rndm());
+   GetMyGraphAt(1)->SetPoint(2,2,gRandom->Rndm());
+   GetMyGraphAt(1)->SetPoint(3,3,gRandom->Rndm());
+   GetMyGraphAt(1)->SetPoint(4,4,gRandom->Rndm());
    GetMyGraphError()->SetPoint(0,0,gRandom->Rndm());
    GetMyGraphError()->SetPoint(1,1,gRandom->Rndm());
    GetMyGraphError()->SetPoint(2,2,gRandom->Rndm());
    GetMyGraphError()->SetPoint(3,3,gRandom->Rndm());
    GetMyGraphError()->SetPoint(4,4,gRandom->Rndm());
-   ArgusHistoDisplay::SetLimits(GetMyGraph());
+   ArgusHistoDisplay::SetLimits(GetMyGraphAt(0));
+   ArgusHistoDisplay::SetLimits(GetMyGraphAt(1));
    ArgusHistoDisplay::SetLimits(GetMyGraphError());
 }
 

For your information:

ROOT has an automatic schema evolution implemented. That means, that all trees 
can be filled into a class from a file, even if the class definition has 
changed (take a look at the input/output section in the root manual).
This works also in the rome environment. All you have to do is to increment the 
version number of a folder, every time you change the folder.

This works for adding, removeing or changing fields. However, if you remove or 
change a field you will have to change your user code, because the Get and Set 
methods will be changed or removed too. So you better think twice about the 
contents of a folder.

Matthias

"Analyzed" fields in MIDAS status display are always 0.0% as you can see in the attached file.
Is it possible to implement function to update this field ?

I tried to make changeable folder a branch of tree.
I could process data. Rome succeeded to write the tree.

But when I tried to draw a leaf of the branch, root complains that the class name is invalid.