|
Back
Midas
Rome
Roody
Rootana
|
Midas DAQ System |
Not logged in |
|
|
20 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
20 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
24 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
25 Jun 2012, Stefan Ritt, Info, midas vme benchmarks
|
25 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
26 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
26 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
21 Jun 2012, Stefan Ritt, Info, midas vme benchmarks
|
21 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
22 Jun 2012, Stefan Ritt, Info, midas vme benchmarks
|
24 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
|
Message ID: 810
Entry time: 22 Jun 2012
In reply to: 809
Reply to this: 812
|
Author: |
Stefan Ritt |
Topic: |
Info |
Subject: |
midas vme benchmarks |
|
|
> > Just for completeness: Attached is the VME transfer speed I get with the SIS3100/SIS1100 interface using
> > 2eVME transfer. This curve can be explained exactly with an overhead of 125 us per DMA transfer and a
> > continuous link speed of 83 MB/sec.
>
> What VME module is on the other end?
>
> K.O.
The PSI-built DRS4 board, where we implemented the 2eVME protocol in the Virtex II FPGA. The same speed can be obtained with the commercial
VME memory module CI-VME64 from Chrislin Industries (see http://www.controlled.com/vme/chinp1.html).
Stefan |