 18 May 2024, Stefan Ritt, Bug Report, midas alarm borked condition evaluation 
|
For everybody using EPICS: There is now a new system called MSetPoint (Midas Set Point) to control whole beamlines via EPICS.
It's under midas/msetpoint and the documentation is here:
|
|
18 May 2024, Stefan Ritt, Bug Report, odbedit load into the wrong place
|
Taht's strange. I always was under the impression that .odb files are loaded relatively to the current location in
the ODB. The behaviour should not be different for different data formats, so I agree to change the .odb loading to
behave like the .xml and .json save/load.
|
 21 May 2024, Nikolay, Bug Report, experiment from midas/examples
|
There are 2 bugs in midas/examples/experiment:
1) In fronted bank named "PRDC" is created for scaler event. But in analyzer
|
|
21 May 2024, Thomas Senger, Bug Report, Params not initialized when starting sequencer
|
Hi all,
On develop, the issue seems to be still there and is not fixed.
The parameters are currently "never" correctly initialized, only as "empty". Tried several times.
|
|
21 May 2024, Zaher Salman, Bug Report, Params not initialized when starting sequencer
|
I traced the problem to a mjsonrpc_db_ls call where I read /Sequencer/Param... . It seems that this sometimes returns a status 312 (DB_NO_KEY) although
I am sure all keys are there in the ODB.
I am still trying to solve this but I may need some help on the mjsonrpc.cxx code.
|
|
21 May 2024, Zaher Salman, Bug Report, Params not initialized when starting sequencer
|
Hi Thomas,
I have a fix for the issue and I would be happy with testers if you are willing. Simply "git checkout newfeature_ZS" and give it a go. No need to recompile
anything.
|
|
22 May 2024, Thomas Senger, Bug Report, Params not initialized when starting sequencer
|
Hi Zaher,
thanks for your help.
I just tried the bug fix, but it still seems not to work properly.
|
|
03 Jul 2024, Tam Kai Chung, Bug Report, Fail to build in the examples/experiment
|
Dear experts,
I am a new user of MIDAS. I try to follow the instruction from
https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux
|
|
04 Jul 2024, Nick Hastings, Bug Report, Fail to build in the examples/experiment
|
I think this may only be an issue on the development branch.
Can you confirm that that is what you are using?
|
|
22 Oct 2004, Konstantin Olchanski, Bug Fix, mhttpd message colouring
|
I commited a fix to mhttpd logic that decides which messages should be shown in
"red" colour- before, any message with square brackets and colons would be
highlighted in red. Now only messages matching the pattern [...:...] are
|
|
09 Nov 2004, Pierre-Andre Amaudruz, Bug Fix, New transition scheme
|
Problem:
If cm_set_transition_sequence() is used for changing the sequence number, the
command odbedit> start/stop/resume/pause -v report the propre sequence but the
|
|
25 Feb 2005, Konstantin Olchanski, Bug Fix, fixed: double free in FORMAT_MIDAS ybos.c causing lazylogger crashes
|
We stumbled upon and fixed a "double free" bug in src/ybos.c causing crashes in
lazylogger writing .mid files in the FORMAT_MIDAS format (why does it use
ybos.c? Pierre says- for generic file i/o). Why this code had ever worked before
|
|
05 May 2005, Konstantin Olchanski, Bug Fix, fix: minor bit rot in the example experiment
|
I fixed some minor bit rot in the example experiment: a few minor Makefile
problems, make the analyzer use the current histogram creation macros, etc. I
also added startup and shutdown scripts. These will be documented as we work
|
|
02 Aug 2005, Konstantin Olchanski, Bug Fix, fix odb corruption when running analzer for the first time
|
I have been plagued by ODB corruption when I run the analyzer for the first time
after setting up the new experiment. Some time ago, I traced this to
mana.c::book_ttree() and now I found and fixed the bug, fix now commited to
|
|
18 Aug 2005, Konstantin Olchanski, Bug Fix, fix race condition between clients on run start/stop, pause/resume
|
It turns out that the new priority sequencing of run state transitions had a
flaw: the frontends, the analyzer and the logger all registered at priority 500
and were invoked in essentially a random order. For example the frontend could
|
|
01 Sep 2005, Stefan Ritt, Bug Fix, fix race condition between clients on run start/stop, pause/resume
|
> It turns out that the new priority sequencing of run state transitions had a
> flaw: the frontends, the analyzer and the logger all registered at priority 500
> and were invoked in essentially a random order. For example the frontend could
|
|
17 Oct 2005, Exaos Lee, Bug Fix, "make install" error under MacOS X
|
Under MacOS X, "make install" will cours an error like this:
[code]
...
|
|
23 Nov 2005, Stefan Ritt, Bug Fix, Endian swapping in mana.c
|
It was reported that following code in mana.c :
[code]
|
|
07 May 2006, Konstantin Olchanski, Bug Fix, Update & add VME drivers
|
I commited fixes for a few minor compilation errors in the VME drivers
(vmicvme.c, etc)
I also added new drivers for the v513 latch and v560 scaler that I wrote for
|
|
18 May 2006, Konstantin Olchanski, Bug Fix, removed a few "//" comments to fix compilation on VxWorks
|
Our VxWorks C compiler (gcc-2.8-something) does not like the "//" comments. Luckily, on VxWorks, we
only compile a small subset of midas, so there is no point in banning all "//" comments. But I did have to
convert a couple of them to /* commens */ in odb.c to make it compile. Changes to odb.c commited. K.O. |