> Hello,
> 
> When I  connect to analyzer on a x86_64 processor(with Roody),  
> a analyzer break with segmentation violation in the root_server_thread  function.
> Same code are working fine on a 32bit processor.
> As I found the problem are in exchanging of pointers between analyzer and client.
> Before to send a pointer, it is saved a pointer in int (size=4, instead of 8) at
> this place:
> Index: src/mana.c
> ===================================================================
> --- src/mana.c  (revision 3498)
> +++ src/mana.c  (working copy)
> @@ -5386,7 +5386,7 @@
> 
>              //write pointer
>              message->Reset(kMESS_ANY);
> -            int p = (POINTER_T) obj;
> +            POINTER_T p = (POINTER_T) obj;
>              *message << p;
>              sock->Send(*message);
> 
> 
> Sincerely Yours,
> Fedor Ignatov 

Do I understand you right? With your patch it works even on 64 bit, right? Or do you
mean there is still a segmentation violation? Anyhow I committed your patch since the
"int" is clearly incorrect.

- Stefan

I agree to what you propose. I'm pretty sure you are right in getting a significant improvement in readout speed
of the history system. So far there was no big request for improving the history system, since the performance in
the experiments I was involved in was good. In MEG for example, we have ~20MB of history data per day, and all
plots even going back some months can be made in a couple of seconds. Have a look for example at

http://midas.psi.ch/megon00/HS/PCS/Pressures.gif?hscale=1843200&hoffset=-5068800

This plot stretches over two weeks and involves ~500 MB of history data, and is prepared in a couple of seconds.
The key question here is how big the disk cache of the OS is. The above plot does not read all 500 MB, but skips
many data points in order to obtain ~1000 data points (one per pixel) for the requested period. To find these
data points, it reads and scans the history index files (yymmdd.idx), which are only a few percent of the
yymmdd.hst data files. The index file contains only the time stamp, the event id and the location of the event in
the *.hst file. Scanning the index file is as efficient as scanning a history file with a single variable. Now
comes the access of the history file. For ~1000 data points, 1000 locations have to be read. This requires
reading in the FAT table for the history file and accessing the sector clusters containing the data. In worst
case one has to read 1000 clusters. With a cluster size of 2kB this will be 2MB of data, something which can be
read very quickly. On the MEG system I observe that the first history plot takes about 5 seconds, while all
consecutive plots take about 1 second. This indicates that the FAT information is cached by the OS. This depends
of course as you indicated correctly on how much memory is available for disk caching, how many processes are
running etc. and will finally determine how fast your history access will be.

So if you implement your proposed new scheme, please consider the following:

- Scanning a single variable file is about the same as scanning the current index file. You save however the
access to the data file. If you plot several variables together, you have to access several "single variable
files", so your access time scales with the number of variables. In the current system, it's likely that
different variables from the same event are located in the same cluster. So you have to read the history file
once for each variable, but after the first variable the sectors of interest are very likely cached by the OS. So
I would estimate that the break-even point is about 2-3 variables. I mean if you read more that three variables,
your proposed method might get slower than the current one. This is of course not the case if there are very many
events in the history file. In that case the index file might be much bigger, since it gets a new entry if *any*
variable in an event changes. If all index file together are bigger than you disk cache, the system will become
slow (and I guess that's what you see). In MEG, the index file is about 1MB per day, so a few weeks fit easily
into the disk cache.

- In order not to get too much data, the history system needs fine tuning. Each slow control system class driver
as an "update threshold", which is used to determine if a variable has "changed". For some noisy channels, it
might be worth to set the threshold at 3 sigma of the noise level (RMS). This can reduce your history data
dramatically. For some equipment, you even might consider to define a minimum update period. This is done via
"/Equipment/<name>/Common/Log history". If that variable is set to 10, the time between two consecutive history
records is at least 10 seconds. For some temperatures for example it might make sense to set this even to one
minute or so, depending on how fast your temperatures change.

- If you implement a per-variable history, you probably have to use the per-event hot link in the ODB. Otherwise
you would exceed the number of hot links MAX_OPEN_RECORDS which is currently 256. If you then get a hot link
update, you have to check manually which variable(s) have changed in log_history() in mlogger.c

- Before you actually go and implement the full system, I would write some small test code to "simulate" the new
scheme. Write some dummy files with the full data you expect in the ALPHA experiment and see what the improvement
is under realistic conditions. Only if you see a big improvement it's worth to implement the full code. Test this
on various machine to get a better overview. Maybe it's worth testing different file systems and cluster sizes as
well.

- If there is an improvement, I'm more than happy to replace the current history code in midas. It might however
not be clean to have a heterogeneous history system, where some files are in the old format and some in the new.
It might be better to write a little conversion routine which converts the old format into the new one, even
omitting records where single variables did not change. This conversion could be even put into the standard
mlogger code and is executed automatically if the logger is started first and finds some old data files.

Even if the speed improvement is not so big, one will certainly win a lot on disk file size (like if only one
variable out of 100 changes). This will probably make it worth to implement anyhow.

Using normal RPC socket:

event size    speed [MB/sec] CPU usage front-end  CPU usage server
==================================================================
    40          3            22                   100                
  1000         44            25                   100
100000        101            14                    50

Using new event socket:

event size    speed [MB/sec] CPU usage front-end  CPU usage server
==================================================================
    40         12            100                   34                
  1000         99            58                    59
100000        101            14                    43

rpc_mode = 1

Fragmented polled events have been implemented in SVN revision 3625.
Fragmentation is a method of breaking down large (>MB) events into smaller
pieces and send them through the shared memory buffers, reassembling them at the
output. In the past this was only possible for periodic events (such as large
histograms read out once every few seconds), but now this is also possible for
polled events.

> Hi there:
> I have a question if there's anybody out there running MIDAS with event builder
> that assembles events from more that just a few front ends (say on the order of
> 0x10 or more)?
> Any experiences with scalability?

At the MEG experiment at PSI we run with 5 front-ends (later 8), each running at
about 10 MB/sec. This gives an overall rate of 50MB/sec without any problem. The
CPU load on the backend (2.6 GHz dual Xenon) is 30% for the event builder and 26%
for the logger. The DANCE experiment at Los Alamos runs 17 front-ends if I'm not
mistaken (John?).

> Our bottle neck is (a) compactPCI backplane reading data from waveform digitizers
> to the frontend CPUs and (b) CPU power on the frontend CPUs to analyzer the waveforms.

I forgot to mention that our front-ends at MEG are 2.8 GHz dual Xenon with Hyperthreading.
This gives "virtual" 4 CPU cores which are really necessary for waveform calibration and
analysis. It makes use of the new multi-threading feature in the midas front-end. I run
actually 7 threads (one VME readout, 4 calibration threads, one encoding thread and the
main thread sending data to the backend. This speeds up data taking by a factor of four
compared to a single thread. So if one plans for waveform analysis in the frontend to
reduce the data, I would recommend a box with dual quad cores.

> It seems that there's no problem running MIDAS with event builder assembling
> data from ~10 front-ends. How about ~100? One possible solution is to have a
> multi-tiered architecture. 
> 
> The reason I am asking is that we are in the process of designing an Ethernet
> based DAQ system with front-ends running on embedded computers (Linux/ARM
> CPU/Xilinix FPGA) and MIDAS is one of my options as a DAQ framework.
> I am open for advice/suggestions.

The event builder is a standalone application not part of the "midas core". It
receives data from N producers and combines the fragments into events based on
their serial number as a dedicated process. If it would become a bottleneck, it
can simply be redesigned and optimized. I made currently good experience with
multi-threaded applications running on multi-core CPUs. Implementing your
multi-tiered architecture as a multi-threaded event builder, where each of ten
threads receives data from ten front-ends, combines them and passes them to the
"collector thread" would make sense to me. Between the threads you can pass data
with many GB/sec, as compared to an ethernet-based architecture. I currently
implemented the rb_xxx functions inside midas.c which lets you pass data between
threads on a zero-copy basis.

Inside the core functions of midas there is no limitations whatsoever. All
counters etc. are 32-bit, so you can run 2^32 data consumers etc. You will first
hit the OS process limit. What I'm more concerned is your network bandwidth. If
you run 100 front-ends each with more than 1MB/sec, you would hit the 1GBit limit
of your network card. If you put more network interfaces, you will hit the disk
I/O limit which is around 100-200MB/sec even on larger RAID1 disk arrays (unless
you do data compression during event building). 

Another limit I see is the run transition. On each start/stop of a run, the
process which wants to start/stop the run has to contact all producers via a TCP
connection. Opening 100 TCP connection will take maybe 10-30 seconds, which is not
very convenient. A multi-threaded approach will help, but this is not (yet)
implemented, maybe you would have to do it yourself.

Another approach would be that you put the event building "in front of midas". All
your front-ends run a specific protocol outside of midas. They send their data to
a collecting process which acts as a single front-end to midas. So in the midas
framework you see only a single front-end, which gets it's data not from hardware,
but from 100 other nodes. This way you can optimize the protocol between your
front-end nodes and the collector process for your application. Run transitions
can be done through multicast UDP messages for example, which will even work with
1000 front-ends. But you have to implement that yourself.

I would start with the first approach: Taking the out-of-the box midas, see how
far I get. If you have access to a normal linux cluster, you can simply run ten
dummy front-ends on each of ten nodes, thus simulating 100 front-ends and see how
far you get. If the event builder is the bottle neck, do an optimization or
redesign. If the run transitions become your bottle neck, switch to method two. In
both ways you can utilize the downstream part of midas, like the logger, the
history system, etc. so you would still gain a lot compared to a design from scratch.

Best regards,

  Stefan

> I hope people find this program useful. If you have any feedback (patches, bug
> reports, requests for improvements), please post them as replies to this forum
> message.

I wouldn't mind putting this into the midas distribution. Put it under utils/, add
an entry to the Makefile, and fix that warning:


mhdump.cxx: In function `int readHstFile(FILE*)':
mhdump.cxx:161: warning: comparison between signed and unsigned integer expressions

I had to switch to Visual C++ 2005 under Windows. This required the upgrade of
all project files under \midas\nt\ and fixing a few warnings, since the new
compiler is more picky. 

Note that in order to use most C RTL funcitons, you have to define two
preprocessor statements:

#define _CRT_SECURE_NO_DEPRECATE
#define _CRT_NONSTDC_NO_DEPRECATE 

either at the beginning of a file (before you include stdio.h), or via the
project property page under C/C++ / Preprocessor / Preprocessor Definitions,
where you also have the WIN32 and the _CONSOLE definitions. I adapted all
project files in the distribution, but for all local projects this has to be
done additionally.

   /* append argument "-b" for batch mode without graphics */
   rargv[rargc] = (char *) malloc(3);
   rargv[rargc++] = "-b";

   TApplication theApp("mlogger", &rargc, rargv);

   /* free argument memory */
   free(rargv[0]);
   free(rargv[1]);
   free(rargv);

   /* append argument "-b" for batch mode without graphics */
   rargv[rargc] = (char *) malloc(3);
   rargv[rargc++] = "-b";

   TApplication theApp("mlogger", &rargc, rargv);

   /* free argument memory */
   free(rargv[0]);
   /*free(rargv[1]);*/
   free(rargv);

rargv[rargc] = (char *) malloc(3);

Hi Carl,

so far I did not experience any problems of running odb&alarm on the same link as
the readout, since the data goes usually frontend->backend, and all other messages
from backend->frontend. So before you do something complicated, try it first the
easy way and check if you have problems at all. So far I don't know anybody who
did separate the network interfaces so I have not description for that.

You can however separate processes. The easiest is to buy a multi-core machine. If
you want to use however separate computers, note that receiving events over the
network is not very optimized. So you should run mserver connected to the frontend
, the event builder and mlogger on the same machine. mhttpd can easily live on
another machine, but there is not much CPU consumption from that (unless you don't
plot long history trends). Running mserver, the event builder and mlogger on the
same machine (dual Xenon mainboard) gave me easily 50 MB/sec (actually disk
limited), and not both CPUs were near 100%. If you put any receiving process (like
the event builder or mlogger or the analyzer) on a separate machine, you might see
a bottlened on the event receiving side of maybe 10MB/sec or so (never really
tried recently).

Best regards,

  Stefan

> Hi,
>    I'm setting up a system with two networks with the intension of having
> control info (odb, alarm) on the 192.168.0.x
> and the frontend readout on 192.168.1.x
> 
> Is there any easy way of doing this?
> I'm also trying to separate processes onto different machines, is there
> any way to not have mserver,mhttpd and (mlogger,mevt) all run on the same
> machine?
> Thanks,
>        Carl Metelko

The reason to call analyzer_init in odb_load is the following:

Assume you run the analyzer offline, analyzing many files in series. Then assume
that you have /Experiment/Run Parameters, which is actively used by the analyzer
(like beam settings etc.). In this case you do a db_open_record() to map
/Experiment/Run Parameters to the exp_param C structure. For this mapping to work,
the ODB structure and the C structure have to be exactly the same. Now assume that
you changed your run parameters over time, like you added some comment later. Now
you want to analyzer several runs, some before and some after the modification.
Both sets have a different structure in /Experiment/Run Parameters, which is a
problem, since the compiled analyzer can only have a single C structure. My "poor"
solution was to call analyzer_init after each loading of the ODB from the *.mid
file. The db_create_record() call matches the C structure to the ODB structure by
modifying the ODB structure if necessary. So if you added one parameter later, this
(modified) structure gets loaded by odb_load, but then it gets adjusted in
analyzer_init().

I understand now that this case might not happen so often, and you are more
bothered by the fact that analyzer_init gets called several time. There must
however be a hook for offline analysis that the user code can correct the ODB
structure. So I propose to add a flag to analyzer_init, such as

INT analyzer_init(BOOL bFirst)
{
}

If bFirst equals TRUE, the function got called from mana_init(), if FALSE, it got
called from odb_load. Then you can put code like

INT analyzer_init(BOOL bFirst)
{
   if (bFirst) {
      p = malloc()
      ...
   }
}

If you agree, I will modify the code and commit the change.

- Stefan

> Thanks for the quick reply, Stefan.
> 
> Please don't change anything in the code unless you find it really important.
I guess 
> changing the analyzer_init prototype will break a lot of code out there?
> 
> In fact, I think I do understand this behavior now.
> And even without your suggested fix there is a simple workaround: I add a static 
> variable to my analyzer_init.cxx file, and do something similar to your bFirst
fix.
> 
> In conclusion, commit your fix if it does not harm others. Postpone this
commit to a 
> future new version of midas which breaks a lot of things anyway...
> 
> A last question, for me to understand: Why not call db_open_record in 
> ana_begin_of_run then?

I fully agree with you that db_open_record would better go into ana_begin_of_run
(and
analyzer_init not being called in odb_load), and I fully agree with you that
changing the
code would break many experiments. ;-)

So I guess we leave it as it is right now as you suggested.

First I have a general question: mserver is started through xinetd, and xinetd has
the options "only_from" and "no_access". This is equivalent to the tcp_wrapper
functionality. Why not using this? It's possible without changing anything in midas.
Or am I missing anything?

If that does not work for some reason, here are some thought from my side:

- We don't have much of a problem with malicious hackers, but with institute-wide
security checking. Hackers are only interested in mechanisms where they can obtain
control over thousands of machines (like breaking ssh etc.). The few midas machines
are not a good target for them. But even at PSI there are security scans, which try
to connect to various ports and can crash systems, so I agree that something needs
to be done.

- Whatever we do, it should be consistent on linux and windows and should not rely
on external packages, since I don't want to get into dependencies there.

- I see that both having the security information in the ODB or having them in
external files can be advantageous. There is certainly the aspect of restoring old
ODBs, or keeping several experiments (ODB) on one machine consistent. On the other
hand storing data in the ODB might me liked by people who are familiar with this
concept, and want to change things though mhttpd for example.

- Having said all that, it would make sense to me to write a simple central routine
access_allowed(), which takes the IP address of a remote client wanting to connect,
and return true or false. This routine should read /etc/hosts.allow, /etc/hosts.deny
and interprete it, but only the section for midas, and maybe only a subset of the
functionality there (we probably don't need NIS netgroup names, external files and
spawn commands there). If the files /etc/hosts.x do not contain anything about midas
or are not preset (Windows!), the routine should look in the ODB under
/experiment/security/mserver/hosts.allow and /experiment/security/mserver/hosts.deny
and use that information instead of the files.

- We probably need different mechanisms for mserver and for mhttpd. The mserver
clients are usually only a few programs like the front-ends, while one may want to
control an experiment over mhttpd from much more machines. So we should establish a
second ACL for mhttpd. The already present "/experiment/security/allowed hosts" for
mhttpd should be converted into "/Experiment/Security/mhttpd/hosts.allow" and the
function access_allowed() should be used to interprete that, so that we only need to
write it once.

Unfortunately I don't have time right now to debug the problem, but I could see
roughly what it could be. The analyzer crashes inside CloseRootOutputFile:

#5  <signal handler called>
#6  0x00002b5f52ad5ee5 in free () from /lib64/libc.so.6
#7  0x000000000040c89b in CloseRootOutputFile () at src/mana.c:1489

in the line 

    free(tree_struct.event_tree[i].branch);

If a "free" crashes, it might indicate that the memory beyond the allocated space
got corrupted. The branch gets allocated in book_ttree(), once for each
analyze_request[i]. The branch gets filled in write_event_ttree():

      /* fill tree both online and offline */
      if (!exclude_all)
         et->tree->Fill();

Maybe one should put printf debugging statements in these places to see what's
going on.

> tree_struct.n_tree keeps counting up from run to run (in book_ttree). This should 
> presumably not be the case, since CloseRootOutputFile() frees the trees at eor().

Yes this indeed a bug. I applied your change and committed the new code.

> I have hunted down "my" segfault problem to the fact that I book histograms not 
> in <module>_init, but in <module>_bor. I have to do so, because only in bor do I 
> know which histograms to book, as this information comes from the ODB (booking 
> only histograms for CAMAC modules which were set to "read" in the ODB). The core 
> dump happens on the first access (->Fill, ->SetName,...) of one of these histos 
> in the 2nd run analyzed offline ("./analyzer -r n m").
> 
> In mana.c:bor (line 1854) is stated that "all ROOT objects created by user module 
> bor() functions go to the output file", and then does a gManaOutputFile->cd();
> Consequently, the histograms vanish after the file is closed, therefore the 
> segfault when trying to access them in the 2nd run. (I keep track of existing 
> histograms, only booking the missing histos in bor.)
> 
> The problem goes away with "gROOT->cd()" in <module>_bor, before fiddling with 
> TFolders and booking the histogram.

ROOT has the strange concept of "current working directory", coming from the fact that
ROOT was written by Fortran and PAW people, being used to have directories and
subdirectories with a persistent state (not really object-oriented style). So one can
set the "current working directory" to the root (=memory) with gROOT->cd() and to a
subdirectory which will later be written into a file with gManaOutputFile->cd(). If
you do the first one, the histograms are created only in memory, while in the later
case they are also created in memory, but will later be written into the output file
in the routine CloseRootOutputFile(). So if you do a gROOT->cd() in <module>_bor,
these histograms will not be written to file. So I guess your solution is not a real
solution.

> I do, however, not really understand the intention why histos booked in bor() go 
> to only the file, whereas histos booked in init() go to memory. Could you please 
> comment briefly? Maybe I missed the most important point. And what about online 
> mode, should this work?

The root output file is opened in bor() and closed in eor(). For a histo to go to the
file, it must be booked after opening the file, that is after bor() in mana.c and
therefore after the gManaOutputFile->cd().

I agree with you that the current scheme is not satisfactory. When running online, you
want to keep the histos between the runs. When running offline, you delete and
re-create them for each run. It would be better to create all histos online and
offline under gROOT, and just copy them to gManaOutputFile before writing them. I have
to admit that this root code was never really used in a productive environment for
offline analysis, so there might be some issues here and there. Some people write
directly root files in the logger, and then do a root-only (without the midas
analyzer) analysis. Unfortunately I'm busy these days and cannot write any code right
now. But if you feel like something should be modified in mana.c, please send it to me
and I can incorporate it into the standard code.

> The biggest problem here is that making 32-bit ODB and 64-bit ODB compatible requires breaking one or
> the other (My proposed changes break the 64-bit version. Alternatively, one could add explicit padding
> to these data structures and break the 32-bit ODB).
> 
> I think it is important to make 32-bit and 64-bit code compatible: at TRIUMF we have to use a mixed
> environment because out latest host computers all run 64-bit Linux while all our VME processors and all
> older machines can only run 32-bit code; this incompatibility causes us weekly headaches.
> 
> Any thoughts?

I agree to make 32-bit and 64-bit compatible. In the long run, everything will be 64-bit, so I would suggest
in breaking the 32-bit ODB, add some padding there where needed, probably with some conditional compiling.
This ensures to keep the native 64-bit packing, which probably will be somehow optimized for 64-bit
architectures and therefore might be a bit faster in the long run, when most systems are 64-bit. After this
has been implemented and well tested, I would go with an official announcement of the 32-bit break in the ODB,
and release a new version, so people can update from a TAR file if necessary. Existing ODB's can be converted
to the new format by exporting them in XML form and importing them again after the upgrade.