 20 Nov 2003, Stefan Ritt, , Implementation of db_check_record()
|
As Konstantin pointed out correctly, the db_create_record() call is pretty
heavy since it copies whole structures around the ODB. Therefore, it
should not used frequently. It might be that several problems are caused
|
 27 Nov 2003, Konstantin Olchanski, , Implementation of db_check_record()
|
> I have therefore implemented the function
> db_check_record(HNDLE hDB, HNDLE hKey, char *keyname, char *rec_str, BOOL
correct)
|
|
30 Nov 2003, Konstantin Olchanski, , Implementation of db_check_record()
|
> > I have therefore implemented the function
> > db_check_record(HNDLE hDB, HNDLE hKey, char *keyname, char *rec_str, BOOL
> correct)
|
|
30 Nov 2003, Stefan Ritt, , Implementation of db_check_record()
|
| Fixed and committed. Can you check if it's working? |
|
01 Dec 2003, Konstantin Olchanski, , Implementation of db_check_record()
|
> Fixed and committed. Can you check if it's working?
Yes, it is fixed. Thanks. K.O. |
|
25 Nov 2003, Suzannah Daviel, , delete key followed by create record leads to empty structure in experim.h
|
Hi,
I have noticed a problem with deleting a key to an array in odb, then
|
|
01 Dec 2003, Stefan Ritt, , delete key followed by create record leads to empty structure in experim.h
|
> I have noticed a problem with deleting a key to an array in odb, then
> recreating the record as in the code below. The record is recreated
> successfully, but when viewing it with mhttpd, a spurious blank line
|
|
30 Nov 2003, Konstantin Olchanski, , bad call to cm_cleanup() in fal.c
|
fal.c does not compile: it calls cm_cleanup() with one argument when there
should be two arguments. K.O. |
|
30 Nov 2003, Stefan Ritt, , bad call to cm_cleanup() in fal.c
|
> fal.c does not compile: it calls cm_cleanup() with one argument when there
> should be two arguments. K.O.
|
|
20 Nov 2003, Konstantin Olchanski, , midas timeout wraparound
|
While reviving midas on midtig01 after it was not used for a while, we see
this. Notice negative "last called" numbers. Looks like a time_t wraparound
somewhere...
|
|
20 Nov 2003, Konstantin Olchanski, , cannot shutdown defunct clients
|
> While reviving midas on midtig01 after it was not used for a while ...
> [local:tigress:S]/>scl -w
> Name Host Timeout Last called
|
|
20 Nov 2003, Stefan Ritt, , cannot shutdown defunct clients
|
> 1) shutdown from mhttpd "programs" page -> "cannot shutdown client"
> 2) "sh mhttpd" from odbedit ->
> [midas.c:5298:cm_shutdown] cannot connect to client mhttpd on host
|
|
20 Nov 2003, Konstantin Olchanski, , cannot shutdown defunct clients
|
> > 1) shutdown from mhttpd "programs" page -> "cannot shutdown client"
> Have you tried a "cleanup" in ODBEdit?
|
|
20 Nov 2003, Stefan Ritt, , cannot shutdown defunct clients
|
> INT == "int", wraparound in 1 month
> DWORD == "unsigned int", wraparound in 2 months
>
|
|
20 Nov 2003, Renee Poutissou, , cannot shutdown defunct clients
|
Indeed the ODB command "cleanup" really works. I have used it several
times with the TWIST DAQ and regularly with the BNMR/MUSR setups where
we have these stubborn clients (ie feepics) that do not want to shutdown
|
|
24 Nov 2003, Stefan Ritt, , cannot shutdown defunct clients
|
> But there is one problem with "cleanup". It has a hardwired timeout of
> 2 seconds. This is a problem for tasks like lazylogger which set a timeout
> of 60 seconds when moving the tape. So BEWARE, if you issue the "cleanup"
|
|
17 Nov 2003, Stefan Ritt, , Revised MVMESTD
|
Let me propose a revised scheme for midas standard VME calls (mvmestd.h).
Pierre mentioned some limitations before, and I find now also some fields
|
|
20 Nov 2003, Pierre-André Amaudruz, Konstantin Olchanski, , Revised MVMESTD
|
Before we try to merge the different access scheme for the different VME hardware,
we present the "optimal" configuration for the VMIC setup. This is a first shot so take it
with caution.
|
|
21 Nov 2003, Stefan Ritt, , Revised MVMESTD
|
Thanks for your contribution. Let me try to map your functionality to mvmestd calls:
> A) The VMIC vme_slave_xxx() options are not considered.
|
|
20 Nov 2003, Konstantin Olchanski, , set-uid-root midas programs
|
I see that MIDAS installs several set-uid-root programs into /usr/local/bin.
In this age and time of evil computer hackers, this is not a good idea and
we should Do Something (TM) about it. Here is my risk assessment:
|
|
20 Nov 2003, Stefan Ritt, , set-uid-root midas programs
|
> dio- is required to be setuid-root to gain I/O permissions. I looked at it a
> few times, and it is probably safe, but I would like to get a second
> opinion. Stephan, can you should it to your local security geeks?
|
|
15 Nov 2003, Konstantin Olchanski, , Phantom "open records"
|
Sometimes (maybe after a client uncleanly exits?), I see phantom "open
records", for example:
[local:twist:Running]Gas>sor
|
|
16 Nov 2003, Stefan Ritt, , Phantom
|
I have seen the same behaviour and it annoys me, too. What I did in the past
is a "cleanup" in ODBEdit which removes these open records. I have soem code
in cm_watchdog(), which should take care of that. If a client is dead, it
|
|
20 Nov 2003, Stefan Ritt, , Phantom
|
I tried to reproduce the problem, but without success. So in case this happens
again, one should debug the code im cm_watchdog() next to the line
|
|
17 Nov 2003, Pierre-André Amaudruz, , Lazylogger application
|
- Remove temporary "/Programs/Lazy" creation.
- Fix Rate calculation for Web display.
- Change FTP channel description (see help). |
|
31 Oct 2003, Konstantin Olchanski, , more odb "run number" error checking
|
I added error checking to the places where we read "/runinfo/run number". In
general, I do this:
|
|
01 Nov 2003, Stefan Ritt, , more odb
|
> I added error checking to the places where we read "/runinfo/run number". In
> general, I do this:
|
|
01 Nov 2003, Konstantin Olchanski, , more odb
|
> > I added error checking to the places where we read "/runinfo/run number".
> Now YOU broke the system by editing all these files with something I consider
> temporary debugging code. A run number of zero is *VALILD*.
|
|
14 Nov 2003, Stefan Ritt, , more odb
|
Ok, I apologize. It's all ok. Thanks for clearifying. Concerning the assert's, it
would be nice to be able to disable them in release code. Under Windows, the
assert() is actually a macro which expands to zero if NDEBUG is defined. I
|
|
31 Oct 2003, Konstantin Olchanski, , Do not frob "/runinfo" in mhttpd.c
|
I found where we tickle the race condition in db_create_record().
1) in mhttpd.c, every time we show the status page, we call
|
|
01 Nov 2003, Stefan Ritt, , Do not frob
|
> I found where we tickle the race condition in db_create_record().
>
> 1) in mhttpd.c, every time we show the status page, we call
|
|
01 Nov 2003, Konstantin Olchanski, , Do not frob
|
> > I found where we tickle the race condition in db_create_record().
> The reason for the db_create_record() is the following: Assume that we change
> the /runinfo structure...
|
|
31 Oct 2003, Konstantin Olchanski, , mana.c without ROOT and HBOOK
|
Stephan, why did you prohibit building mana.c without ROOT and HBOOK
support? I think such a configuration is valid and should be allowed.
|
|
01 Nov 2003, Stefan Ritt, , mana.c without ROOT and HBOOK
|
> Stephan, why did you prohibit building mana.c without ROOT and HBOOK
> support? I think such a configuration is valid and should be allowed.
|
|
01 Nov 2003, Konstantin Olchanski, , mana.c without ROOT and HBOOK
|
> > Stephan, why did you prohibit building mana.c without ROOT and HBOOK
> > support? I think such a configuration is valid and should be allowed.
>
|
|
31 Oct 2003, Konstantin Olchanski, , Disable "tab"s in xemacs
|
The default C indentation style in xemacs uses "tab" characters, violating
the MIDAS coding convention. To disable this misfeature in xemacs (emacs
too?), put this incantation in your .xemacs/custom.el file:
|
|
30 Oct 2003, Stefan Ritt, , Fixed several potential problems for ODB corruption
|
I just realized that db_set_value, db_set_data, db_set_num_values and
db_merge_data do not check for num_values == 0. With such a parameter the
ODB can become corrupted, since zero length ODB entries are not allowed. I
|
|
30 Oct 2003, Stefan Ritt, , 'umask' added to lazylogger for FTP connections
|
I had to add a 'umask' opiton to the loggers (lazy and mlogger) for the new
PSI archive. One can now put a filename into the settings like:
|
|
16 Oct 2003, David Morris, , Updated thread functions
|
ss_thread_create now returns the thread ID on success, and zero on failure.
Previously returned SS_SUCCESS or SS_NO_THREAD. User must now test the
return value to determine result.
|
|
28 Oct 2003, Stefan Ritt, , Updated thread functions
|
> ss_thread_create now returns the thread ID on success, and zero on failure.
> Previously returned SS_SUCCESS or SS_NO_THREAD. User must now test the
> return value to determine result.
|
|
15 Oct 2003, Konstantin Olchanski, , test
|
test
test
test |
|
15 Oct 2003, Konstantin Olchanski, , test
|
> test
> test
> test
|
|
15 Oct 2003, Stefan Ritt, , test
|
> > test
> > test
> > test
|
|
12 Oct 2003, Konstantin Olchanski, , mhttpd: add Elog text to outgoing email.
|
This commit adds the elog message text to the outgoing email message. This
functionality has been requested a logn time ago, but I guess nobody got
around to implement it, until now. I also added assert() traps for the most
|
|
13 Oct 2003, Stefan Ritt, , mhttpd: add Elog text to outgoing email.
|
> around to implement it, until now. I also added assert() traps for the most
> common array overruns in the Elog code.
|
|
13 Oct 2003, Konstantin Olchanski, , mhttpd: add Elog text to outgoing email.
|
> > around to implement it, until now. I also added assert() traps for the most
> > common array overruns in the Elog code.
>
|
|
13 Oct 2003, Stefan Ritt, , mhttpd: add Elog text to outgoing email.
|
> > > around to implement it, until now. I also added assert() traps for the
most
> > > common array overruns in the Elog code.
|
|
12 Oct 2003, Konstantin Olchanski, , Array overruns in mhttpd.c::submit_elog()
|
While adding new functionality to submit_elog() (add the message text to the
outgoing email), I noticed that the email text is being stored into an array
of size 256, mail_text[256], without any checks for array overrun. This
|
|
12 Oct 2003, Konstantin Olchanski, , Array overruns in mhttpd.c::submit_elog()
|
> While adding new functionality to submit_elog() (add the message text to the
> outgoing email), I noticed that the email text is being stored into an array
> of size 256, mail_text[256], without any checks for array overrun. This
|
|
13 Oct 2003, Stefan Ritt, , Array overruns in mhttpd.c::submit_elog()
|
> > While adding new functionality to submit_elog() (add the message text to
the
> > outgoing email), I noticed that the email text is being stored into an
|
|
13 Oct 2003, Konstantin Olchanski, , Array overruns in mhttpd.c::submit_elog()
|
> > > While adding new functionality to submit_elog() ....
>
> The whole elog functionality in mhttpd will be replaced (sometime) ...
|
|
12 Oct 2003, Konstantin Olchanski, , Refuse to set run number zero
|
I am debugging the frequent problem where the run number is mysteriously
reset to zero. As a first step, I am commiting changes to mhttpd.c and midas.c:
- abort on obviously corrupted "run number < 0"
|
|
12 Oct 2003, Konstantin Olchanski, , Refuse to set run number zero
|
> I am debugging the frequent problem where the run number is mysteriously
> reset to zero. As a first step, I am commiting changes to mhttpd.c and midas.c:
> - abort on obviously corrupted "run number < 0"
|
|
11 Aug 2003, Konstantin Olchanski, , mhttpd crash on corrupted ODB /RunInfo
|
Invalid values of ODB /RunInfo/State cause mhttpd crash in
show_status_page() because of an out of bounds access to the array of state
names. Suggest this fix: remove array of state names, use existing ladder of
|
|
10 Oct 2003, Konstantin Olchanski, , mhttpd crash on corrupted ODB /RunInfo
|
There was no feedback. This code has been commited. K.O.
> Invalid values of ODB /RunInfo/State cause mhttpd crash in
|