it is a very convenient interface! Does it support the ODB links in the path names ? -- thanks, regards, Pasha

Dear All, 

I'm pretty sure many know this already, however I found this feature by a an accident 
and want to share with those who don't know about it yet - seems very useful. 

- it looks that one can use ROOT scripting with rootcling and call from the 
  interactive ROOT prompt any function defined in midas.h and access ODB seemingly 
  WITHOUT DOING anything special 

- more surprisingly, that also works for odbxx, with one minor exception in handling 
  the 64-bit types - the proof is in attachment. The script test_odbxx.C loaded 
  interactively is Stefan's

 https://bitbucket.org/tmidas/midas/src/develop/examples/odbxx/odbxx_test.cxx 

with one minor change - the line 
 
   o[Int64 Key] = -1LL;

is replaced with

   int64_t x = -1LL;
   o["Int64 Key"] = x;

- apparently the interpeter has its limitations. 

My rootlogon.C file doesn't load any libraries, it only defines the appropriate 
include paths. So it seems that everything works pretty much out of the box. 

One issue has surfaced however. All that worked despite my experiment 
had its name="test_025", while the example specifies experiment="test". 
Is it possible that that only first 4 characters are being tested ? 

-- regards, Pasha

Dear MIDAS experts, 

I'm running into a minor but annoying issue with the subdirectory name ordering by the ODB browser. 
I have a straw-man hash map which includes ODB subdirectories named "000", "010", ... "300", 
and I'm yet to succeed to have them displayed in a "natural" order: the subdirectories with names 
starting from "0" always show up on the bottom of the list - see attached .png file. 

Neither interactive re-ordering nor manual ordering of the items in the input .json file helps. 

I have also attached a .json file which can be loaded with odbedit to reproduce the issue. 

Although I'm using a relatively recent - ~ 20 days old - commit, 'db1819ac', is it possible 
that this issue has already been sorted out ?

-- many thanks, regards, Pasha  

Dear MIDAS experts, 

currently, the MIDAS messaging system is optimized for one-line long messages, 
so the content of 2+liners shows up in the message log in the reverse order, 
with the first line on the bottom of the message. 

I wonder if printing the message content in the reverse order, starting from the last line, 
would make sense ? - that wouldn't affect one-line long messages, but could make longer 
messages more useful. 

--thanks, regards, Pasha

Hi All,

I have found a weird one:

The following code executes on the frontend machine in the
frontend_exit() routine, and connects to the odb running on
another separate machine:
...
     cm_msg(MINFO,__func__, "line %d", __LINE__);

     cm_get_experiment_database(&hdb, NULL);

     cm_msg(MINFO,__func__, "line %d", __LINE__);
     status = db_find_key(hdb, 0, "/Experiment/Run Parameters", &hkey);
     cm_msg(MINFO,__func__, "line %d, hkey=%d, status=%d",
            __LINE__, hkey, status);
     checkstat("db_find_key returned status %d", status);
     cm_msg(MINFO,__func__, "line %d", __LINE__);
     status = db_close_record(hdb, hkey);

     /* NOTREACHED!! the above call to db_close_record
        doesn't return!
      */
     cm_msg(MINFO,__func__, "line %d, status=%d", __LINE__, status);
     checkstat("db_close_record returned status %d", status);

checkstat is a macro that does the following:
#define checkstat(format, arg...)\
do{ if(status != DB_SUCCESS) {\
cm_msg(MERROR, __func__, format, ## arg);\
return FE_ERR_ODB;}}while(0)

The key exists, and the status of the search is 1
(i.e., DB_SUCCESS) and rest of the code tries to run.  What gets
really weird is that the db_close_record _doesn't_ _return_.
The code following the NOTREACHED comment just doesn't get
called.  I get the message from the __LINE__ just in front
of the call, but not the message afterwards (cm_msg and printf 
were tried).  Somehow db_close_record is causing a non-local 
exit or signal or something. No error message is printed and the 
frontend continues to exit with exit code 0.  But, since the rest
of my frontend_exit/odb closing doesn't happen, the odb is left in
a lost state requiring a cleanup.  If I comment out the calls to 
db_close_record, the rest of my frontend_exit runs normally 
and the cm_disconnect_experiment() in mfe.c eventually closes my 
open records correctly (I expect, anyway) and this is the present 
workaround i am using.  The terror i have is that several of my 
hotlinked callback routines will call the close_record routine 
when resetting illegal values.  No end of hilarity will result there...

I was using the same code in the frontend under 1.9.2 and
have only recently upgraded to 1.9.3-? tarball from PAA and 
there were no problems using the 1.9.2 code: this is a 1.9.3
issue.

I have localized the weirdness to what I think is the RPC interface.
Running the nullfrontend (no camac access) on the same machine as 
hosts the ODB I can make the problem appear and disappear in the 
following way:
(odb is local on machine ``monet'')

nullfe -h monet -e acqmonad     : db_close_record will get lost

nullfe -e acqmonad              : db_close_record works as expected.

I've tried also with the patch for the 256 byte odb string bug since
many of the open records have strings of that length, but that isn't
it. The only substancial looking change to mserver from 1.9.2 to 1.9.3
is the SIGPIPE ignore and that doesn't look like a good candidate either.
Can this be that some of the 
   #IFDEF LOCAL_ROUTINES
that got moved about in odb.c and others
are causing the remote call to get confused?

Clearly the answer is to just use stable and happy 1.9.2, but the 
people for whom I am working now really want to use ROOT for
an analyzer...


cheers,
.p.

Paul Knowles.                   phone: 41 26 300 90 64
email: Paul.Knowles@unifr.ch      Fax: 41 26 300 97 47
finger me at pexppc33.unifr.ch for more contact information

Hi Stefan,

> once and forever, I am considering using the "indent" program which comes 
> with every linux installation. Running indent regularly on all our code 
> ensures a consistent look.

I think this can be called a Good Thing.

> The "-kr" style does the standard K&R style, 
> but used tabs (which is not good), and does a 4-column 
> indention which is I think too much. So I would propose 
> following flags:
>        indent -kr -nut -i2 -di8 -bad <filename.c>

(some of this is a repeat from an earlier mail to SR):
You might also want a -l90 for a longer line length than 75
characters.  K&R style with indentation from 5 to 8 spaces
is a good indicator of complexity: as soon as 40 characters
of code wind up unreadably squashed to the right of the
screen, you have to refactor to have less indentation
levels.  This means you wind up rolling up the inner parts
of deeply nested conditionals or loops as separate
functions, making the whole code easier to understand.

I think that setting -i2 is ``going around the problem'' 
of deep nesting.  If you really need to keep the indentation 
tabs less than 4 (8 is ideal) because your code is falling off the 
right edge of the screen, you are indented too deeply.  Why do 
I say that?  There is the famous ``7+-1'' idea that you can hold
in you head only 7 ideas (give or take one) at any time.  I'm not 
that smart and I top out at about 5:  So for example, a conditional 
in a loop  in a conditional in a switch is about as deep a level 
of nesting as  I can easily understand (remember that I also have 
to hold the line i'm working on as well): that's 4 levels, plus one for the
function itself and we are at 40 characters away from the right edge
of the screen using -i8 and have some 40 characters available for writing code
(how often is a line of code really longer than about 40 characters?).
On top of that, the indentation is easily seen so you know immediately 
wheather you are at the upper conditional, or inner conditional.  A -i2
just doesn't make the difference big enough.  -i5 is a happy balance 
with enough visual clue as to the indentation level, but leaves you 50
to 60 characters for the code line itself.

However, if you are indenting very deeply, then the poor reader can't hold
on to the context: there are more than 6 or 7 things to keep in mind.
In those cases, roll up the inner levels as a separate function and 
call it that way. The inner complexity of the nested statements gets 
nicely abstracted and then dumb people like me can understand what 
you are doing.

So, in brief: indent is a good idea, and -in with n>=4 will be best.
I don't think -i2 will lend itself to making the code so much easier 
to read.

thanks for listening.
.p.

Hi,

I posted on the ROOTANA elog but there seems to be little activity there...

Could someone confirm if this is a bug?
https://midas.triumf.ca/elog/Rootana/14

Another user replied that they are encountering the same issue, so I think it is unlikely it is just our installation.

While ROOTANA is unusable for us, I tried to use the example Frontend and Analyzer (under the Experiment source folder). The analyzer does not seem to do much though. A root file is produced but nothing is placed into it. Is that normal?

Any help would be welcome.

There are 2 bugs in midas/examples/experiment:

1) In fronted bank named "PRDC" is created for scaler event. But in analyzer 
module scaler.cxx the bank named "SCLR" is searched for the same event.

2) In mana.cxx linked from analyzer.cxx is "Invalid name "/Analyzer/Tests/Always 
true/Rate [Hz]" passed to db_create_key: should not contain "["". 
Looks like ODB doesn't like '[', ']' characters.

Thanks for all the helpful hints. When finally managing to evade all timeouts and attach the debugger in just the right moment, we find that we get a segfault in mserver at L827:
   case RPC_DB_COPY_XML:
      status = db_copy_xml(CHNDLE(0), CHNDLE(1), CSTRING(2), CPINT(3), CBOOL(4));
Some printf debugging then pointed us to the fact that the culprit is the pointer de-referencing in CBOOL(4). This in turn can be traced back to mrpc.cxx L282 ff, where the line with the arrow was missing:
  {RPC_DB_COPY_XML, "db_copy_xml",
    {{TID_INT32, RPC_IN},
     {TID_INT32, RPC_IN},
     {TID_ARRAY, RPC_OUT | RPC_VARARRAY},
     {TID_INT32, RPC_IN | RPC_OUT},
 ->  {TID_BOOL, RPC_IN},
     {0}}},

If we put that in, the mserver process completes peacfully and we get a segfault in the client ("Wrong key type in XML file") which we will attempt to debug next. Shall I create a pull request for the additional RPC argument or will you just fix this on the fly?

And now we also fixed the client segfault, odb.cxx L8992 also needs to know about the header:
if (rpc_is_remote())
      return rpc_call(RPC_DB_COPY_XML, hDB, hKey, buffer, buffer_size, header);

(last argument was missing before).

Hi,
I have a bank of floats with slow control values that I store to the history and
ODB. When reading the history, both in the webbrowser and with mhist, the floats
get read with the wrong endianness; under /equipment/variables in the ODB they
however display correctly. System is a an intel OpenSuse linux box. Any ideas?

Thanks

Nik

Logging a list of variables to the history via links in the history ODB subtree,
we get messages as follows at every run start:

19:43:24.009 2019/10/06 [Logger,ERROR] [history_schema.cxx:2676:hs_write_event,ERROR] Event 'System' data size mismatch: expected 412 bytes, got 416 bytes

19:43:24.008 2019/10/06 [Logger,ERROR] [history_schema.cxx:2676:hs_write_event,ERROR] Event 'System' data size mismatch: expected 412 bytes, got 416 bytes

19:43:23.850 2019/10/06 [Logger,ERROR] [history_schema.cxx:455:hs_write_event,ERROR] Event 'System' data size mismatch count: 25, expected 412 bytes, hs_write_event() called with as much as 416 bytes

19:43:23.850 2019/10/06 [Logger,ERROR] [history_schema.cxx:455:hs_write_event,ERROR] Event 'System' data size mismatch count: 25, expected 412 bytes, hs_write_event() called with as much as 416 bytes

The history calculates the size of a record from the size of the individual variables, (history_schema.cxx, L2666 ff), whereas the ODB delivers the data aligned/padded to the size of the largest value in the record.
In our history, a long list of doubles (64 Bit) fas followed by three floats (32 bit), leading to a padded response from the ODB, 4 byte longer than the history expects.
Quick fix: Add another 32 bit dummy variable to the history. Gets rid of the error messages...
Should probably be fixed at a deeper level...

>I wonder why do you this via ODB links. The "standard" way of writing to the history should be to create events for an equipment and flag this equipment as being written to the
>history. All variables under /Equipment/<name>/Variables then automatically go into the history and you don't have to worry about ODB links. Only variables not fitting the
>equipment/variables scheme should be dealt with via ODB links, like variables under equipment/statistics or parameters in another ODB tree. In a typical midas experiment, only
>very few variables typically go into the 'System' event. This is however probably not a solution to your problem. If you have a similar structure (doubles plus an odd number of floats)
>under 'variables', you might get the same error.

>
> In our history, a long list of doubles (64 Bit) fas followed by three floats (32 bit)
>

We do this in the MuX DAQ and mix things that come directly from MIDAS (the MIDAS trigger rate) and things from the
analyzer (rates in the self-triggering detectors) and some temperatures from yet somewhere else. Yes, we could have
kept that apart, yes, in this case a double would also work (and not break things), but a bug is a bug...
I could think of senisble use cases where doubles and ints are mixed and I also know quite a few areas where it makes
sense to use floats...

Nik

By accident we had history variables with leading spaces. The history schema check then decides that this is a new variable (the leading space is not read from the history file) and starts a new file. We found this because the run start became slow due to the many, many history files created. It would be nice to just get an error if one has a malformed variable name like this.

How to reproduce: Try to put a variable with a leading space in the name into the history, repeatedly start runs.
Sugested fix: Produce an error if a history variable has a leading space.

Hello experts,

I have been writing a SC frontend for a powersupply. I have used the model 
where the frontend can be started with "-i n" option so that each fe can 
control a different supply. During the development/testing of the program I 
would normally only run a single instance with "-i 1". However when I started
a second instance with "-i 2" I found problems with the history plots that
were being made for the original "-i 1" instance. The variable being plotted
seemed to randomly jump between the value from the "-i 1" instance and 
the "-i 2" instance.  confirmed that the "correct" values exist for each 
frontend in the odb under /Equipment/Foo01/Variables and 
/Equipment/Foo02/Variables

This is also not just a plotting artifact since I was also
able to see the two different values by running mhist.

I saw this behaviour using midas-2019-03 and also the head of the development
branch (686e4de2b55023b0d1936c60bcf4767c5e6caac0 from just under 48 hours ago). 

I was able to reproduce this with a stripped down frontend that just 
sets a variable that is equal to its frontend_index. Please find the code 
and Makefile attached. Presumably I've done something wrong in my 
implementation that hopefully a more experienced person can spot quite 
quickly, but please let me know if any more information is needed.

I have seen this behaviour on both Debian 10 and on a CentOS 7 Singularity 
image running on top of Debian 10.

Thanks,

Nick.

P.S. I made the topic of this post "Forum" and not "Bug Report" since I
expect the root of this problem is somewhere between the keyboard and chair.

Hi Stefan,

thanks for you quick reply.

> My first question would be why are you using several font-ends at all?

Becuase I was following the model used for many of the frontends for the ND280 FGD.

> That makes things more 
> complicated than needed. In the normal FE framework, you can define either several equipment 
> served by one frontend, or even one equipment linked to several devices. In the MEG experiment 
> we have one slow control frontend controlling ~100 devices without problem. In the old days 
there 
> was a problem that some slow devices could throttle the readout, but since the invention of 
multi-
> threaded slow control equipment, each device gets its own thread so they don't block each 
other.

Perhaps things have changed in the 10 years since the FGD SC code was written. I can do it 
differently but doing it that way seemed naturual since around 90% of the frontend code that I
have see does it that way.

Nick.

Hi LCP,

thanks for the suggestion and link. Unfortunatly I don't think this explains it.

Nick.

Hi Ben,

thanks for your reply. I can confirm that your suggested workaround does indeed
make the problem dissapear.

I guess this issue hasn't been seen at T2K since we use MYSQL for the history.

Thanks,

Nick.

Hi Ben,

thanks for your reply. I can confirm that your suggested workaround does indeed
make the problem dissapear.

I guess this issue hasn't been seen at T2K since we use MYSQL for the history.

Thanks,

Nick.

Hi Konstantin,

thanks for your reply.

> > thanks for your reply. I can confirm that your suggested workaround does indeed
> > make the problem dissapear.
> > I guess this issue hasn't been seen at T2K since we use MYSQL for the history.
> 
> I think you found the source of the problem, confused event id assignments. To confirm,
> can you email me (or post here) the output of odbedit "ls -l /History/Events".

Sorry, do you want this for after I've applied the fix suggested by Ben or with the original code 
that I posted.

With the original code it only shows one fe even though both are running:

[local:e666:S]History>ls -l /History/Events
Key name                        Type    #Val  Size  Last Opn Mode Value
---------------------------------------------------------------------------
1                               STRING  1     10    2m   0   RWD  FeDummy02
0                               STRING  1     16    2m   0   RWD  Run transitions

[local:e666:S]History> scl
Name                Host
mhttpd              localhost           
fedummy01           localhost           
fedummy02           localhost           
ODBEdit             localhost           
Logger              localhost           
[local:e666:S]History>ls "/History/Display/Default/Dummy/
Timescale                       1h
Zero ylow                       n
Show run markers                y
Show values                     y
Sort Vars                       n
Log axis                        n
Minimum                         0
Maximum                         0
Variables
                                FeDummy01:Data
                                FeDummy02:Data
Label
                                
                                
Colour
                                #00AAFF
                                #FF9000
Factor
                                0
                                0
Offset
                                0
                                0
Buttons
                                10m
                                1h
                                3h
                                12h
                                24h
                                3d
                                7d
Formula
                                
                                
Show old vars                   n

> If that's the problem, you can avoid it completely by switching to a history storage method
> that does not rely on magic mapping between equipment names and numeric event id's:
> try the "FILE" method (set odb /Logger/History/FILE/Active to "y", restart the logger) or
> the "MYSQL" method (you will need to setup a mysql database). You tell mhttpd and mhist which 
> history data to read by setting ODB /History/LoggerHistoryChannel to one of the channel names 
> from /logger/history/, restart mhttpd. (mhttpd and mhist used to print a message "reading history 
> data from channel XXX", but somebody removed this message).

Using the orginal code I posted and switching from MIDAS history to FILE history did not seem to 
change the random behaviour in the history plots.

Regards,

Nick.