Hello,

I've noticed that SC FEs that use the TMFE class with midas-2022-05-c often report errors when calling TMFE:Sleep().
The error is :

[tmfe.cxx:1033:TMFE::Sleep,ERROR] select() returned -1, errno 22 (Invalid argument).

This seems to happen in two different ways:

1. Error being reported repeatedly
2. Occasional single errors being reported

When the first of these presents, we typically restart the FE to "solve" the problem.
Case 2. is typically ignored.

The code in question is:

void TMFE::Sleep(double time)
{
   int status;
   fd_set fdset;
   struct timeval timeout;
      
   FD_ZERO(&fdset);
      
   timeout.tv_sec = time;
   timeout.tv_usec = (time-timeout.tv_sec)*1000000.0;

   while (1) {
      status = select(1, &fdset, NULL, NULL, &timeout);
#ifdef EINTR
      if (status < 0 && errno == EINTR) {
         continue;
      }
#endif
      break;
   }
      
   if (status < 0) {
      TMFE::Instance()->Msg(MERROR, "TMFE::Sleep", "select() returned %d, errno %d (%s)", status, errno, strerror(errno));
   }
}

So it looks like either file descriptor of the timeval struct must have a problem.
From some reading it seems that invalid timeval structs are often caused by one or both
of tv_sec or tv_usec not being set. In the code above we can see that both appear to be
correctly set initially.

From the select() man page I see:

RETURN VALUE
       On success, select() and pselect() return the number of file descriptors contained in
       the three returned descriptor sets (that is, the total number of bits that are set in
       readfds,  writefds,  exceptfds).  The return value may be zero if the timeout expired
       before any file descriptors became ready.

       On error, -1 is returned, and errno is set to indicate the error; the file descriptor
       sets are unmodified, and timeout becomes undefined.

The second paragraph quoted from the man page above would indicate to me that perhaps the
timeout needs to be reset inside the if block. eg:

      if (status < 0 && errno == EINTR) {
         timeout.tv_sec = time;
         timeout.tv_usec = (time-timeout.tv_sec)*1000000.0;
         continue;
      }

Please note that I've only just briefly looked at this and was hoping someone more
familiar with using select() as a way to sleep() might be better able to understand
what is happening.

I wonder also if now that midas requires stricter/newer c++ standards if there maybe
some more straightforward method to sleep that is sufficiently robust and portable.

Thanks,

Nick.

Dear all,

I have problem in event buffer size.

When run MIDAS, I got error "total event size (1307072) larger than buffer size
(1048576)", so I guess that the EVENT_BUFFER_SIZE is small.

I change EVENT_BUFFER_SIZE in midas.h from 0x100000 to 0x200000. After compiling
and run MIDAS, I got other error "Shared memory segment with key 0x4d040761
already exists, please remove it manually: ipcrm -M 0x4d040761 size0x204a3c" in
system.C

I check the shmget() function in system.C and it is said that error come from
Shared memory segments larger than 16,773,120 bytes and create teraspace shared
memory segments

Anyone has this problem before?
Thanks for your help

M.T

Dear all,

I have problem in event buffer size.

When run MIDAS, I got error "total event size (1307072) larger than buffer size
(1048576)", so I guess that the EVENT_BUFFER_SIZE is small.

I change EVENT_BUFFER_SIZE in midas.h from 0x100000 to 0x200000. After compiling
and run MIDAS, I got other error "Shared memory segment with key 0x4d040761
already exists, please remove it manually: ipcrm -M 0x4d040761 size0x204a3c" in
system.C

I check the shmget() function in system.C and it is said that error come from
Shared memory segments larger than 16,773,120 bytes and create teraspace shared
memory segments

Anyone has this problem before?
Thanks for your help

M.T

I am sorry for my late reply memory in my PC is 16 GB I check the contents of .SHM_TYPE.TXT and it is "POSIXv2_SHM". But there is no buffer sizes in "/Experiment" After run "ipcrm -M 0x4d040761 size0x204a3c", remove .SYSTEM.SHM and run MIDAS again, I still get error "Shared memory segment with key 0x4d040761 already exists, please remove it manually: ipcrm -M 0x4d040761 size0x204a3c" M.T

I am sorry for my late reply 

memory in my PC is 16 GB 

I check the contents of .SHM_TYPE.TXT and it is "POSIXv2_SHM". 
But there is no buffer sizes in "/Experiment" 

After run "ipcrm -M 0x4d040761 size0x204a3c", remove .SYSTEM.SHM and run MIDAS again, I still get error "Shared memory segment
with key 0x4d040761 already exists, please remove it manually: ipcrm -M 0x4d040761 size0x204a3c" M.T

Please, tell me how to choose a value of a "key" like DCM, pulser period,
presamples, upper thresholds to run a experiment? where can I find the related
informations? 

Hello there,

I am working on a task that involves some ODB changes that happen within 20-500 
ms. The wait command for Midas Sequencer only works for > 1 second. As a 
workaround, I tried calling a python script that has a time.sleep() command, but 
the sequencer doesn't wait for the python script to terminate before moving to the 
next command. Obviously, I could just move the entire script to python, but that 
would cause further issues to us. Is there a way to have a wait that has precision 
in order of milliseconds from within the Midas Sequencer? If there is no Midas-
native methods for doing this, what workaround will you suggest to get this to 
work?

> > Ok, I implemented the float second wait function. Internally it works in ms, so the maximum resolution is 0.001 s.
> > 
> > Best,
> > Stefan
> 
> Thank you, we will test this soon and let you know if we see any issues (but we're not expecting any).

Hello Stefan,

Thank you for the help you provided for us so far. I tried your code changes on our midas fork. Now, I notice that any 
wait command takes at least 0.2 seconds to run. 

For example, when I use the following script:
SCRIPT source scripts/time_print.sh
WAIT Seconds, 0.1
SCRIPT source scripts/time_print.sh
WAIT Seconds, 0.1
SCRIPT source scripts/time_print.sh

The time_print.sh script prints time segments separated by almost exactly 0.2 seconds. Same goes for when I use 0.01 
second waits.

However, when I use 0.2 seconds wait, then I get time segments separated by 0.3 seconds. I also tried something like 
this:
SCRIPT source scripts/time_print.sh
WAIT Seconds, 0.2
WAIT Seconds, 0.2
SCRIPT source scripts/time_print.sh
WAIT Seconds, 0.2
WAIT Seconds, 0.2
SCRIPT source scripts/time_print.sh

This script results in time segements of 0.6 seconds difference. It is not immidiately clear to me from the sequencer 
code what causes this effect. The code as it stands is a lot better than what we had before the changes, but I am 
wondering if this can be reduced to the order of 1ms or 10ms.

Best regards,
Musaab Faozi

> Actually I realized that a 1ms wait still works, so I reduced it to that.
> 
> Stefan

Thank you so much, Stefan. I have tested your changes, and it seems like this does 
the job for our purposes. Very appreciated!

Best regards,
Musaab Faozi

In midas.c, the bk_delete function removes a bank by decrementing the total
event size and then copying the remaining banks into the location of the first
using memcpy from string.h.

memcpy is not specified to handle overlapping memory regions (such as MIDAS
banks), though it seems most common implementations do.

memmove should be used instead, which is specified to behave as if copying
through an intermediate buffer.

I noticed the misbehavior using glibc with gcc version 4.4.4 and scientific
linux 6.0. Other gcc versions changed nothing, as this originates from the
implementation of memcpy in libc.

libc version:
GNU C Library stable release version 2.12, by Roland McGrath et al.
Compiled by GNU CC version 4.4.5 20110214 (Red Hat 4.4.5-6).
Compiled on a Linux 2.6.32 system on 2011-12-06.

I am using the MSCB SCS2000 to monitor slow control variables (temperatures, voltages, etc). I am trying to 
get it set up at fermilab as a test stand in the MC1 building and was wondering if anyone has integrated 
Midas with a MSCB SCS2000 before. We have two systems at fermilab, one system that is currently running 
in the g-2 experimental hall, but running an out of date version of midas. The second test stand I am 
setting up is working with the current version of midas. I believe we will easily be able to figure out the 
external probes for temperatures and voltages just fine. But the MSCB SCS2000 box itself has 1 
temperature value, 1 current value, and 5 voltages internally that we also need to monitor. If I use the msc 
command I can read back the external values through the daughter cards I have installed on the SCS2000 
box but has no way of reading back the internal values that I need. I also have been looking through the 
MIDAS files trying to find a possible way to read these out to no avail.

If anyone has any ideas or has had previous work with the SCS2000 and knows how to read back the 
internal values please let me know. 

Thanks,

Michael McEvoy
NIU Graduate Student

As the Midas software is installed using CMake, it can be easily integrated into 
other CMake projects using the MidasConfig.cmake file produced during the Midas 
installation.

This file points to the location of the include and libraries of Midas using three 
variables:
- MIDAS_INCLUDE_DIRS
- MIDAS_LIBRARY_DIRS
- MIDAS_LIBRARIES

Then the CMakeLists file of the new project can use the CMake find_package 
functionalities like:
```
find_package (Midas REQUIRED)
if (MIDAS_FOUND)
    MESSAGE(STATUS "Found midas: libraries ${MIDAS_LIBRARIES}")
    pbuilder_add_ext_libraries (${MIDAS_LIBRARIES})
else (MIDAS_FOUND)
    message(FATAL "Unable to find midas")
endif (MIDAS_FOUND)
include_directories (${MIDAS_INCLUDE_DIR})
```
pbuilder_add_ext_libraries is a CMake macro allowing to automatically add the 
libraries into the project: this macro can be found here: 
https://github.com/project8/scarab/blob/master/cmake/PackageBuilder.cmake
If such macro doesn't exist, the linkage to each executable/library can be done 
similarly to https://midas.triumf.ca/elog/Midas/1964 using: 

```
target_link_libraries(crfe ${MIDAS_LIBARIES} ${LIBS})
```

The current version of the MidasConfig.cmake is minimal and could for example 
include a version number: this would allow to define a e.g. minimal version of 
Midas needed by the new project.

Hi,

Using midas version 12-2020,  I am trying to run mhttpd from within a docker container using docker-compose.
Starting from an empty ODB, I simply run `mhttpd` and this is the output I have:
midas_hatfe_1  | <Warning> Starting mhttpd...
midas_hatfe_1  | [mhttpd,INFO] ODB subtree /Runinfo corrected successfully
midas_hatfe_1  | MVOdb::SetMidasStatus: Error: MIDAS db_find_key() at ODB path "/WebServer/Host list" returned status 312
midas_hatfe_1  | Mongoose web server will not use password protection
midas_hatfe_1  | Mongoose web server will not use the hostlist, connections from anywhere will be accepted
midas_hatfe_1  | Mongoose web server listening on http address "localhost:8080", passwords OFF, hostlist OFF
midas_hatfe_1  | [mhttpd,ERROR] [mhttpd.cxx:19160:mongoose_listen,ERROR] Cannot mg_bind address "[::1]:8080"

According to the documentation, the WebServer tree should be created automatically when starting the mhttpd; but it seems not as it doesn't find the entry "/WebServer/Host list".
If I create it by end (using "create STRING /WebServer/Host list"), I still get the error message that mhttpd didn't bind properly to the local port 8080.
I am not sure what it wrong, as mhttpd is working perfectly well in this exact container for midas 03-2020.

Any idea what difference makes it not possible anymore to run into these container?

Thanks very much for your help.
Cheers
Mathieu

> > It looks like mhttpd managed to bind to the IPv4 address (localhost), but not the IPv6 address (::1). If you don't need it, try setting "/Webserver/Enable IPv6" to false.
> 
> We had this issue already several times. This info should be put into the documentation at a prominent location.
> 
> Stefan

Thanks a lot, this solved my issue!

Hi,

I am running a simple FE executable that is supposed to define a PRAW DWORD bank.
The issue is that, right after the start of the run, the logger crashes without messages.
Then the FE reports this error, which is rather confusing.
```
12:59:29.140 2021/05/24 [feTestDatastruct,ERROR] [odb.cxx:6986:db_set_data1,ERROR] "/Equipment/Trigger/Variables/PRAW" is of type UINT32, not UINT32
```

Hi

I had a problem with the compilation of midas after an OS update to the recent version of OpenSuse tumbleweed. The function stime() in system.cxx:3196 is no longer available. 

In the documentation it is also marked as deprecated with the suggestion to use clock_settime instead:
https://man7.org/linux/man-pages/man2/stime.2.html

replacing system.cxx:3196 with the clock_settime - method in system.cxx:3200 - 3204 also for OS_UNIX seems to solve the problem, but i'm not sure if this will cause problems on older OS's.

Martin

Hi

We have a problem with running midas frontends when they should connect to a experiment on a different machine using the -h option. Starting them locally works fine. Firewall is off on both systems, Enable non-localhost RPC and Disable RPC hosts check are set to 'yes', mserver is running on the machine that we want to connect to. 
Error message looks like this: 

...
Connect to experiment Mu3e on host 10.32.113.210...
OK
Init hardware...
terminate called after throwing an instance of 'mexception'
  what():  
/home/mu3e/midas/include/odbxx.h:1102: Wrong key type in XML file
Stack trace:
1   0x00000000000042D828 (null) + 4380712
2   0x00000000000048ED4D midas::odb::odb_from_xml(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) + 605
3   0x0000000000004999BD midas::odb::odb(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) + 317
4   0x000000000000495383 midas::odb::read_key(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) + 1459
5   0x0000000000004971E3 midas::odb::connect(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, bool, bool) + 259
6   0x000000000000497636 midas::odb::connect(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, bool, bool) + 502
7   0x00000000000049883B midas::odb::connect_and_fix_structure(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) + 171
8   0x0000000000004385EF setup_odb() + 8351
9   0x00000000000043B2E6 frontend_init() + 22
10  0x000000000000433304 main + 1540
11  0x0000007F8C6FE3724D __libc_start_main + 239
12  0x000000000000433F7A _start + 42

Aborted (core dumped)


We have the same problem for all our frontends. When we want to start them locally they work. Starting them locally with ./frontend -h localhost also reproduces the error above.

The error can also be reproduced with the odbxx_test.cxx example in the midas repo by replacing line 22 in midas/examples/odbxx/odbxx_test.cxx (cm_connect_experiment(NULL, NULL, "test", NULL);) with cm_connect_experiment("localhost", "Mu3e", "test", NULL); (Put the name of the experiment instead of "Mu3e")

running odbxx_test locally gives us then the same error as our other frontend.

Thanks in advance,
Martin

> Looks like your MIDAS is built without debug information (-O2 -g), the stack trace does not have file names and line numbers. Please rebuild with debug information and report the stack trace. Thanks. K.O.
> 
> > Connect to experiment Mu3e on host 10.32.113.210...
> > OK
> > Init hardware...
> > terminate called after throwing an instance of 'mexception'
> >   what():  
> > /home/mu3e/midas/include/odbxx.h:1102: Wrong key type in XML file
> > Stack trace:
> > 1   0x00000000000042D828 (null) + 4380712
> > 2   0x00000000000048ED4D midas::odb::odb_from_xml(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) + 605
> > 3   0x0000000000004999BD midas::odb::odb(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) + 317
> > 4   0x000000000000495383 midas::odb::read_key(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) + 1459
> > 5   0x0000000000004971E3 midas::odb::connect(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, bool, bool) + 259
> > 6   0x000000000000497636 midas::odb::connect(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, bool, bool) + 502
> > 7   0x00000000000049883B midas::odb::connect_and_fix_structure(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >) + 171
> > 8   0x0000000000004385EF setup_odb() + 8351
> > 9   0x00000000000043B2E6 frontend_init() + 22
> > 10  0x000000000000433304 main + 1540
> > 11  0x0000007F8C6FE3724D __libc_start_main + 239
> > 12  0x000000000000433F7A _start + 42
> > 
> > Aborted (core dumped)
> 
> K.O.

As i said we can easily reproduce this with midas/examples/odbxx/odbxx_test.cpp  (with cm_connect_experiment changed to "localhost")
Stack trace of odbxx_test with line numbers:

Set ODB key "/Test/Settings/String Array 10[0...9]" = ["","","","","","","","","",""]
Created ODB key "/Test/Settings/Large String Array 10"
Set ODB key "/Test/Settings/Large String Array 10[0...9]" = ["","","","","","","","","",""]
[test,ERROR] [system.cxx:5104:recv_tcp2,ERROR] unexpected connection closure
[test,ERROR] [system.cxx:5158:ss_recv_net_command,ERROR] error receiving network command header, see messages
[test,ERROR] [midas.cxx:13900:rpc_call,ERROR] routine "db_copy_xml": error, ss_recv_net_command() status 411, program abort

Program received signal SIGABRT, Aborted.
0x00007ffff6665cdb in raise () from /lib64/libc.so.6
Missing separate debuginfos, use: zypper install libgcc_s1-debuginfo-11.3.0+git1637-150000.1.9.1.x86_64 libstdc++6-debuginfo-11.2.1+git610-1.3.9.x86_64 libz1-debuginfo-1.2.11-3.24.1.x86_64
(gdb) bt
#0  0x00007ffff6665cdb in raise () from /lib64/libc.so.6
#1  0x00007ffff6667375 in abort () from /lib64/libc.so.6
#2  0x0000000000431bba in rpc_call (routine_id=11249) at /home/labor/midas/src/midas.cxx:13904
#3  0x0000000000460c4e in db_copy_xml (hDB=1, hKey=1009608, buffer=0x7ffff7e9c010 "", buffer_size=0x7fffffffadbc, header=false) at /home/labor/midas/src/odb.cxx:8994
#4  0x000000000046fc4c in midas::odb::odb_from_xml (this=0x7fffffffb3f0, str=...) at /home/labor/midas/src/odbxx.cxx:133
#5  0x000000000040b3d9 in midas::odb::odb (this=0x7fffffffb3f0, str=...) at /home/labor/midas/include/odbxx.h:605
#6  0x000000000040b655 in midas::odb::odb (this=0x7fffffffb3f0, s=0x4a465a "/Test/Settings") at /home/labor/midas/include/odbxx.h:629
#7  0x0000000000407bba in main () at /home/labor/midas/examples/odbxx/odbxx_test.cxx:56
(gdb) 

> > As i said we can easily reproduce this with midas/examples/odbxx/odbxx_test.cpp  (with cm_connect_experiment changed to "localhost")
> > [test,ERROR] [system.cxx:5104:recv_tcp2,ERROR] unexpected connection closure
> > [test,ERROR] [system.cxx:5158:ss_recv_net_command,ERROR] error receiving network command header, see messages
> > [test,ERROR] [midas.cxx:13900:rpc_call,ERROR] routine "db_copy_xml": error, ss_recv_net_command() status 411, program abort
> 
> ok, cool. looks like we crashed the mserver. either run mserver attached to gdb or enable mserver core dump, we need it's stack trace,
> the correct stack trace should be rooted in the handler for db_copy_xml.
> 
> but most likely odbxx is asking for more data than can be returned through the MIDAS RPC.
> 
> what is the ODB key passed to db_copy_xml() and how much data is in ODB at that key? (odbedit "du", right?).
> 
> K.O.

Ok. Maybe i have to make this more clear. ANY odbxx access of a remote odb reproduces this error for us on multiple machines. 
It does not matter how much data odbxx is asking for.

Something as simple as this reproduces the error, asking for a single integer:

int main() {
   cm_connect_experiment("localhost", "Mu3e", "test", NULL);
   midas::odb o = {
      {"Int32 Key", 42}
   };
   o.connect("/Test/Settings");
   cm_disconnect_experiment();
   return 1;
}

at the same time this runs fine:

int main() {
   cm_connect_experiment(NULL, NULL, "test", NULL);
   midas::odb o = {
      {"Int32 Key", 42}
   };
   o.connect("/Test/Settings");
   cm_disconnect_experiment();
   return 1;
}

in both cases mserver does not crash. I do not have a stack trace. There is also no error produced by mserver.

Last year we did not have these problems with the same midas frontends (For example in midas commit 9d2ef471 the code from above runs 
fine). I am trying to pinpoint the exact commit where this stopped working now. 

Hi,
Maybe I've misunderstood the code, but odb::watch() creates a deep copy of itself to set the watch to.  The comment where this happens specifies that this is in case the current one goes out of scope.  See https://bitbucket.org/tmidas/midas/src/2878647fb73648474b35223ce53a125180f751b3/src/odbxx.cxx#lines-1393:1395
So as far as I can tell allowing the current odb instance to go out of scope is supported.

Thanks,

Mark.


> Okay, but this is then a big issue IMO. For Mu3e we do this in every frontend and I also checked again all of these watches are broken at the moment (with commit 3ad98c5 they worked).
>  
> In the old style we did for example (see https://bitbucket.org/tmidas/midas/src/develop/examples/crfe/crfe.cxx):
> 
> INT frontend_init()
> {
>    HNDLE hKey;
> 
>    // create Settings structure in ODB
>    db_create_record(hDB, 0, "Equipment/Clock Reset/Settings", strcomb1(cr_settings_str).c_str());
>    db_find_key(hDB, 0, "/Equipment/Clock Reset", &hKey);
>    assert(hKey);
> 
>    db_watch(hDB, hKey, cr_settings_changed, NULL);
> 
>    /*
>     * Set our transition sequence. The default is 500. Setting it
>     * to 600 means we are called AFTER most other clients.
>     */
>    cm_set_transition_sequence(TR_START, 600);
> 
>    return CM_SUCCESS;
> }
> 
> I thought this will be the same (under the hood) in the current odbxx way via:
> 
> odb settings("Equipment/Clock Reset/Settings");
> settings.watch(cr_settings_changed);
> 
> Best,
> Marius
> 
> 
> > Well, the object *went* out of scope. For my code it‘s hard to realize this, so the error reporting is poor. Also the first object should have the same
> > problem. Just by accident that it does not crash.
> > 
> > Stefan 
> > 
> > > This is not the case here. Note that the error message: "Callback received for a midas::odb object which went out of scope" is not called! The segmentation fault happens later line 96.
> > > 
> > > > The answer is in the error message: „Object went out of scope“. When your frontent_init() exits, the odb objects are destroyed. When you get a callback, it‘s linked to the
> > > > destroyed object. This is like if you have a local string and pass a reference to that string in the return of the function.
> > > > 
> > > > Use a global object (bad) or use „new“ (potential memory leak). I would use a global structure which holds all odb objects.
> > > > 
> > > > Stefan
> > > >  
> > > > > 
> > > > > last week I was running MIDAS with the commit 3ad98c5. Today I updated MIDAS and now all my watch functions are crashing. Attached I have a minimal example frontend of the problem.
> > > > > 
> > > > > In our software we have two functions one which sets up the ODB values of the frontend and another one which sets up all watch functions. So overall we connect two time to the ODB during fronend_init one time to create the values and one time to create the watch. In the example code a simple version of this setup is shown:
> > > > > 
> > > > > INT frontend_init() {
> > > > > 
> > > > >   cm_msg(MINFO, "frontend_init() setup", "Test FE");
> > > > > 
> > > > >   odb settings = {
> > > > >     {"Test", 123},
> > > > >     {"sub", {}}
> > > > >   };
> > > > >   settings.connect_and_fix_structure("/Equipment/Test FE/Settings");
> > > > >   // settings.watch(watch); <-- this works without segmentation fault
> > > > > 
> > > > >   odb new_settings("/Equipment/Test FE/Settings");
> > > > >   new_settings.watch(watch); // <-- here I am getting a segmentation fault
> > > > > 
> > > > >   return CM_SUCCESS;
> > > > > }
> > > > > 
> > > > > When I directly set the watch everything runs fine however, when I create a new ODB object and use this one to set a watch I am getting the following segmentation fault:
> > > > > 
> > > > > Process 18474 stopped
> > > > > * thread #1, queue = 'com.apple.main-thread', stop reason = EXC_BAD_ACCESS (code=1, address=0x34)
> > > > >     frame #0: 0x000000010004fa38 test_fe`midas::odb::watch_callback(hDB=<unavailable>, hKey=<unavailable>, index=0, info=0x00006000002001c0) at odbxx.cxx:96:25 [opt]
> > > > >    93  	      if (po->m_data == nullptr)
> > > > >    94  	         mthrow("Callback received for a midas::odb object which went out of scope");
> > > > >    95  	      midas::odb *poh = search_hkey(po, hKey);
> > > > > -> 96  	      poh->m_last_index = index;
> > > > >    97  	      po->m_watch_callback(*poh);
> > > > >    98  	      poh->m_last_index = -1;
> > > > >    99  	   }
> > > > > 
> > > > > Best,
> > > > > Marius