The new history as well as the clock in the web page header show the local time 
of the user's computer running the browser.
Would it be possible to make it either always use the time zone of the Midas 
server, or make it selectable from the config page?
It's not ideal trying to relate error messages from the midas.log to history 
plots if the time stamps don't match.

The documentation fro the Elog ODB tree here:
https://midas.triumf.ca/MidasWiki/index.php//Elog_ODB_tree#Url

says:

The Built-in elog will ignore this key.

If using an Built-in Elog, this key must NOT be present.

I assume this is an artifact from amending the documentation, but it's unclear if 
the key has to be removed or not. I.e. if the key exists and is empty, will the 
built-in elog work? In what way will it break?

The documentation for the sequencer loop says:

<quote>
LOOP [name ,] n ... ENDLOOP	To execute a loop n times. For infinite loops, "infinite" 
can be specified as n. Optionally, the loop variable running from 0...(n-1) can be accessed 
inside the loop via $name.
</quote>

In fact the loop variable runs from 1...n, as can be seen by running this exciting 
sequencer code:

1 COMMENT "Figuring out MSL"
2 
3 LOOP n,4
4   MESSAGE $n,1
5 ENDLOOP

Maybe this is already possible, I have a hard time understanding the mhttpd source code.

I would like to use a function defined in the <script> block of my custom page as an onchange callback.

Specific example:
I have an modbthermo that I would like to change to three different colours for "too cold", "just right", and "too hot" (measuring porridge, presumably). The examples only show the explicit (condition)?(val1):(val2) syntax, which doesn't allow more than two values, so I had hoped to replace

onchange="this.dataset.color=this.value > 40?'red':'blue';"

with something like

onchange="this.dataset.color=check_Temp(this.value);"

or

onchange="check_Temp(this.value, this.dataset.color);"

if that's easier somehow. The function itself would then return the colour string, or set the color argument to that string (I'm not sure if JS passes references or just values.)

Is this a possibility?

I figured I wasn't the first to have this idea.
Works great, thanks!

I really like the concept of the odbxx interface.
I think it would be a nice feature if one could have a read_only connection, e.g. by declaring a "const midas::odb".
Just for fun I tried if this already works, but the compiler doesn't allow const midas::odb for e.g. the [] operator. I'm guessing this would be non-trivial to implement, but I like the idea of certain Midas clients being able to read the odb without risking corruption.

Actually, now that I look again, there is a mistake in the instructions:
you say

onchange="this.dataset.color=check_therm(this)"

but check_therm doesn't return anything and instead changes the color itself. So you either want the function to return the string and use the above assignment, or use the function you provide and use

onchange="check_therm(this)"

> Having a "const midas::odb" probably does not work (at least I would not know how to implement that).
> 
> But I could make an internal flag analog to the auto refresh flags. So you would have
> 
>     o.set_write_protect(true);
> 
> to turn on write protection. Would that work for you?

Absolutely. Looking at the underlying code I was also at a loss how const would work.
I'm mostly just interested in having small clients that only read from the odb (for whatever reason) without risking corrupting it by messing something 
up in the code, especially since such small clients are almost by definition hacked together quickly on the fly.

I’m trying to run MIDAS using a frontend code/client named “fetiglab”. Run stops 
after 2/3sec with an error saying “Unknown error 319 from client “fetiglab” on 
localhost.

Frontend code compiled without any errors and MIDAS reads the frontend 
successfully, this only comes when I start the new run on MIDAS, here are a few 
more details from the terminal-

11:46:32 [fetiglab,ERROR] [odb.cxx:11268:db_get_record,ERROR] struct size 
mismatch for "/" (expected size: 1, size in ODB: 41920)

11:46:32 [Logger,INFO] Deleting previous file 
"/home/rcmp/online3/run00621_000.root"

11:46:32 [ODBEdit,ERROR] [midas.cxx:5073:cm_transition,ERROR] transition START 
aborted: client "fetiglab" returned status 319

11:46:32 [ODBEdit,ERROR] [midas.cxx:5246:cm_transition,ERROR] Could not start a 
run: cm_transition() status 319, message 'Unknown error 319 from client 
'fetiglab' on host "localhost"'

TR_STARTABORT transition: cleanup after failure to start a run

‌

I’ve also enclosed a screenshot for the same, any suggestions would be highly 
appreciated. thanks

Dear MIDAS experts,

Greetings! 
I am currently utilizing MIDAS for our experiment and I have encountered an issue with our event builder, which was developed based on the example code 'eventbuilder/mevb.cxx'. I'm uncertain whether this is a genuine bug or an inherent feature of MIDAS.

The event builder fails to initiate the 10th run since its startup, requiring us to relaunch it. Upon investigating the code, I have identified that this issue stems from line 8404 of mfe.cxx (the version's hash is db94df6fa79772c49888da9374e143067a1fff3a). According to the code, the 10-run limit is imposed by the variable MAX_EVENT_REQUESTS in midas.h. While I can increase this value as the code suggests, it does not provide a complete solution, as the same problem will inevitably resurface. This complication unnecessarily hampers our data collection during long observation periods.

Despite the code indicating 'BM_NO_MEMORY: too many requests,' this explanation does not seem logical to me. In fact, other standard frontends do not encounter this problem and can start new runs as required without requiring a frontend relaunch.

I apologize for not yet fully grasping the intricate implementation of midas.cxx and mfe.cxx. However, I would greatly appreciate any suggestions or insights you can offer to help resolve this issue.

Thank you in advance for your kind assistance.

Dear 

> > The event builder fails to initiate the 10th run since its startup, 
> > 'BM_NO_MEMORY: too many requests,'
> 
> Hi Kou,
> 
> It sounds like you might be calling bm_request_event() when starting a run, but not calling bm_delete_request() when the run stops. So you end up "leaking" event requests and eventually reach the limit of 10 open requests.
> 
> In examples/eventbuilder/mevb.c the request deletion happens in source_unbooking(), which is called as part of the "run stopping" logic. I've just updated the midas repository so the example compiles correctly, and was able to start/stop 15 runs without crashing.
> 
> Can you check the end-of-run logic in your version to ensure you're calling bm_delete_request()?

Dear Ben,

Hello. Thank you for your attention to this problem!

> It sounds like you might be calling bm_request_event() when starting a run, but not calling bm_delete_request() when the run stops. So you end up "leaking" event requests and eventually reach the limit of 10 open requests.

I understand. Thanks for the description.

> In examples/eventbuilder/mevb.c the request deletion happens in source_unbooking(), which is called as part of the "run stopping" logic. I've just updated the midas repository so the example compiles correctly, and was able to start/stop 15 runs without crashing.
> 
> Can you check the end-of-run logic in your version to ensure you're calling bm_delete_request()?

I really appreciate your update.
Although I am away at the moment from the DAQ development, I will test it and report the result here as soon as possible.

Best regards,
Kou

Add more checks to db_validate_key() for pkey->total_size, item_size and
num_values. Automatically correct total_size to be item_size*num_values (we
saw this corruption and tested this fix).

K.O.

For your enjoyment, here is the diff:

RCS file: /usr/local/cvsroot/midas/src/odb.c,v
retrieving revision 1.64
diff -r1.64 odb.c
718a719,744
>   /* check key sizes */
>   if ((pkey->total_size < 0)||(pkey->total_size > pheader->key_size))
>     {
>     cm_msg(MERROR, "db_validate_key", "Warning: invalid key \"%s\"
total_size: %d", path, pkey->total_size);
>     return 0;
>     }
> 
>   if ((pkey->item_size < 0)||(pkey->item_size > pheader->key_size))
>     {
>     cm_msg(MERROR, "db_validate_key", "Warning: invalid key \"%s\"
item_size: %d", path, pkey->item_size);
>     return 0;
>     }
> 
>   if ((pkey->num_values < 0)||(pkey->num_values > pheader->key_size))
>     {
>     cm_msg(MERROR, "db_validate_key", "Warning: invalid key \"%s\"
num_values: %d", path, pkey->num_values);
>     return 0;
>     }
> 
>   /* check and correct key size */
>   if (pkey->total_size != pkey->item_size*pkey->num_values)
>     {
>     cm_msg(MINFO,  "db_validate_key", "Warning: corrected key \"%s\" size:
total_size=%d, should be %d*%d=%d", path, pkey->total_size, pkey->item_size,
pkey->num_values, pkey
->item_size*pkey->num_values);
>     pkey->total_size = pkey->item_size*pkey->num_values;
>     }
> 

Add switch "-C" to odbedit to allow it to connect to corrupted ODB. Then,
depending on corruption, the user can manually remove or correct the
corrupted entries. Also, some corruption is automatically fixed by "odbedit"
itself. I use this functionality to debug and fix broken ODBs.

K.O.

For your enjoyment, here is the diff:

diff -r1.64 odbedit.c
3058a3059
> BOOL          corrupted;
3063c3064
<   debug = cmd_mode = FALSE;
---
>   debug = corrupted = cmd_mode = FALSE;
3077a3079,3080
>     else if (argv[i][0] == '-' && argv[i][1] == 'C')
>       corrupted = TRUE;
3104c3107,3108
<         printf("               [-c Command] [-c @CommandFile] [-s size]
[-g (debug)]\n\n");
---
>         printf("               [-c Command] [-c @CommandFile] [-s size]\n");
>         printf("               [-g (debug)] [-C (connect to corrupted
ODB)]\n\n");
3123c3127,3133
<   if (status != CM_SUCCESS)
---
>   else if ((status == DB_INVALID_HANDLE)&&corrupted)
>     {
>     cm_get_error(status, str);
>     puts(str);
>     printf("ODB is corrupted, connecting anyway...\n");
>     }
>   else if (status != CM_SUCCESS)

It appears that all midas applications are now required to link with the
pthreads library even if they do not use threads. This is caused by a
pthread_create() call from ss_thread_create() in system.c.

Is this the intended behaviour?

K.O.

Invalid values of ODB /RunInfo/State cause mhttpd crash in
show_status_page() because of an out of bounds access to the array of state
names. Suggest this fix: remove array of state names, use existing ladder of
if/else statements to explicitely set state name. Verified the fix works for
TWIST. Will commit this into MIDAS CVS unless get feedback.

src/mhttpd.c:show_status_page() {
  ...
  rsprintf("<tr align=center><td>Run #%d", runinfo.run_number);

  if (runinfo.state == STATE_STOPPED)
    rsprintf("<td colspan=1 bgcolor=#FF0000>Stopped");
  else if (runinfo.state == STATE_PAUSED)
    rsprintf("<td colspan=1 bgcolor=#FFFF00>Paused");
  else if (runinfo.state == STATE_RUNNING)
    rsprintf("<td colspan=1 bgcolor=#00FF00>Running");
  else
    rsprintf("<td colspan=1 bgcolor=#FFFFFF>Unknown");

  if (runinfo.requested_transition)
  ...

K.O.

I want midas alarms to go off when I cannot ping arbitrary remote hosts. Is
there is easy/preferred way to do this? K.O.

There was no feedback. This code has been commited. K.O.

> Invalid values of ODB /RunInfo/State cause mhttpd crash in
> show_status_page() because of an out of bounds access to the array of state
> names. Suggest this fix: remove array of state names, use existing ladder of
> if/else statements to explicitely set state name. Verified the fix works for
> TWIST. Will commit this into MIDAS CVS unless get feedback.
> 
> src/mhttpd.c:show_status_page() {
>   ...
>   rsprintf("<tr align=center><td>Run #%d", runinfo.run_number);
> 
>   if (runinfo.state == STATE_STOPPED)
>     rsprintf("<td colspan=1 bgcolor=#FF0000>Stopped");
>   else if (runinfo.state == STATE_PAUSED)
>     rsprintf("<td colspan=1 bgcolor=#FFFF00>Paused");
>   else if (runinfo.state == STATE_RUNNING)
>     rsprintf("<td colspan=1 bgcolor=#00FF00>Running");
>   else
>     rsprintf("<td colspan=1 bgcolor=#FFFFFF>Unknown");
> 
>   if (runinfo.requested_transition)
>   ...
> 
> K.O.

While adding new functionality to submit_elog() (add the message text to the
outgoing email), I noticed that the email text is being stored into an array
of size 256, mail_text[256], without any checks for array overrun. This
cannot be good. How should this be corrected?
K.O.

> While adding new functionality to submit_elog() (add the message text to the
> outgoing email), I noticed that the email text is being stored into an array
> of size 256, mail_text[256], without any checks for array overrun. This
> cannot be good. How should this be corrected?
> K.O.

Similar problem exists in midas.c::el_submit(). The array "message[10000]" is
easy to overrun by submitting a long elog message.

K.O.