 31 Oct 2018, Joseph McKenna, Bug Report, Side panel auto-expands when history page updates
|
> >
> >
> > One can collapse the side panel when looking at history pages with the button in
|
|
02 Nov 2018, Stefan Ritt, Bug Report, Side panel auto-expands when history page updates
|
> I apologise for miss using the word refresh. The re-appearing sidebar was also seen with the automatic
> reload, I have implemented your fix here and it now works great!
|
|
02 Nov 2018, Thomas Lindner, Bug Report, Side panel auto-expands when history page updates
|
> > I apologise for miss using the word refresh. The re-appearing sidebar was also seen with the automatic
> > reload, I have implemented your fix here and it now works great!
>
|
|
02 Nov 2018, Stefan Ritt, Bug Report, Side panel auto-expands when history page updates
|
> Joseph's original message says that the problem is with the standard MIDAS history page, which currently use a complete reload
> when refreshing. Of course we are planning to update this history pages to only grab what it needs (as well as changing the
> plotting to use newer HTML plotting). But until that upgrade happens your fix is helpful for the history page.
|
 11 Jan 2007, Steve Hardy, Forum, Shared memory problems
|
Hello,
Just did a fresh install of MIDAS from the SVN repository under CentOS and
|
|
11 Jan 2007, Stefan Ritt, Forum, Shared memory problems
|
> Hello,
>
> Just did a fresh install of MIDAS from the SVN repository under CentOS and
|
|
11 Jan 2007, Steve Hardy, Forum, Shared memory problems
|
Thanks for your help. I tried again and it got me back to the initial problem I had.
The frontend will start, and the analyzer starts (complains about there not being a
last.root, but other than that it's fine), and then when starting mlogger, I get:
|
|
11 Jan 2007, Stefan Ritt, Forum, Shared memory problems
|
That sounds like you mix versions: You have an old executable (maybe your mlogger) which
has been linked against the old midas version, but you create the ODB with the new
odbedit or frontend. The new version complains if it finds an ODB from a previous version
|
|
15 Jul 2004, Stefan Ritt, , Severe bug in 1.9.4
|
Hello midas'ers,
Today I discovered a severe bug in the routine bm_check_buffers(), which
|
|
12 Dec 2003, Stefan Ritt, , Several small fixes and changes
|
I committed several small fixes and changes:
- install.txt which mentions explicitly ROOT
|
|
26 Oct 2006, Hans Fynbo, Forum, Setup of Ortec ADC AD413A in MIDAS
|
We are new to MIDAS and try to setup a simple system with one ortec camac ADC
AD413A and the hytec1331 controler. Has anyone used this module in MIDAS we
would be grateful for the corresponding frontend.c etc.
|
|
21 Apr 2023, Grzegorz Nieradka, Forum, Setup Midas with Caen vx2740 - ask for help
|
I'm trying to setup Midas with the Caen vx2740 VME digitizer board.
As the backend driver I used the software from Darkside located here:
|
|
21 Apr 2023, Ben Smith, Forum, Setup Midas with Caen vx2740 - ask for help
|
> I'm not able to find documentation what is purpose of the RPC? Could someone give any indicators how I can start debug this behavior? Or there is some
documentation about the RPC?
|
|
21 Apr 2023, Konstantin Olchanski, Forum, Setup Midas with Caen vx2740 - ask for help
|
> I'm trying to setup Midas with the Caen vx2740 VME digitizer board.
welcome to the world of daq and midas! Ben already answered and he will help you with this specific hardware. (we work together)
|
|
07 Apr 2020, Ivo Schulthess, Suggestion, Sequencer loop break
|
I am using the Midas sequencer to run subsequent measurements in a loop, without
knowing how many iterations in advance. Therefore, I am using the "infinity"
option. Since I have other commands after the loop, it would be nice to have the
|
|
21 Apr 2020, Stefan Ritt, Suggestion, Sequencer loop break
|
> I am using the Midas sequencer to run subsequent measurements in a loop, without
> knowing how many iterations in advance. Therefore, I am using the "infinity"
> option. Since I have other commands after the loop, it would be nice to have the
|
|
23 Apr 2020, Ivo Schulthess, Suggestion, Sequencer loop break
|
> You can do that with the "GOTO" statement, jumping to the first line after the loop.
>
> Here is a working example:
|
|
23 Apr 2020, Stefan Ritt, Suggestion, Sequencer loop break
|
> > You can do that with the "GOTO" statement, jumping to the first line after the loop.
> >
> > Here is a working example:
|
|
25 Apr 2020, Konstantin Olchanski, Suggestion, Sequencer loop break
|
> LOOP runs, 5
> ...
> ENDLOOP
|
|
19 Aug 2015, Pierre Gorel, Bug Report, Sequencer limits
|
While I know some of those limits/problems have been already been reported from
DEAP (and maybe corrected in the last version), I am recording them here:
|