I have the following use case: I would like to check if two elements of an array exceed a certain threshold. 
However, they are not consecutive. Currently, I have to write two alarms, one checking Array[8] and one 
checking Array [10].

It would be nice if we could enter conditions such as "/Path/To/Array[8,10] > 0.5".

I looked into the code of al_evaluate_condition() and it seems very C-style. I know that you have been 
refactoring a lot of code to work with STL strings and their functions. If you find the time to refactor 
alarm.cxx, I ask that you consider adding comma-separated lists as a new feature.

Cheers
Lukas

To reproduce:
- Open a history plot, click [-] a few times until the x axis shows more than 7 days.
- Scroll to the past (left)
- Click "Jump to current time" (the triangle)

Expected result:
The upper limit of the x axis is at the current time and the lower range is now - whatever range you had before 
(>7d)

Actual result:
The upper limit is the current time, the lower limit is now - 7d

(The interval seems unchanged if the range was < 7d before clicking "Jump to current time")

12:51:20.154 2025/02/19 [SC Frontend,ERROR] [mfe.cxx:620:register_equipment,ERROR] Write cache size mismatch for buffer "SYSTEM": equipment "Environment" asked for 0, while eqiupment "LED" asked for 10000000
12:51:20.154 2025/02/19 [SC Frontend,ERROR] [mfe.cxx:620:register_equipment,ERROR] Write cache size mismatch for buffer "SYSTEM": equipment "LED" asked for 10000000, while eqiupment "Xenon" asked for 0

• A "Reload File" button
  
• Support for patterns in ODBSET, e.g.:
  

  • ODBSET "/Path/value[1,3,5]", 1

  • ODBSET "/Path/value[1-5,7-9]", 1

  • Arbitrary combinations of the above
    
• Support for variable substitution:
  

  • SET GOODCHANNELS, "1-5,7,9"; ODBSET "/Path/value[$GOODCHANNELS]", 1

  • SET BADCHANNELS, "6,8"; ODBSET "/Path/value[!$BADCHANNELS]", 1

  • ODBSET "/Path/value[0-100, except $BADCHANNELS]", 1

• Load a file
  
• Double-click it to edit it, acknowledge the "To edit the sequence it must be opened in an editor tab" dialog
  
• A new tab opens
  
• Edit something, click "Start", acknowledge the "Save and start?" dialog (which pops up even if no changes are made)
  
• Run the script
  
• Double-click to make more changes -> another tab opens
  

SET v, "54"
SET file, "MPPCHV_$v.odb"
ODBLOAD $file

SET v, "54.2"
SET file, "MPPCHV_$v.odb"
ODBLOAD $file

SET v, 54.2
SPRINTF file, "MPPCHV_%f.odb", $v
ODBLOAD $file

ODBLOAD f"MPPCHV_{v:.1f}.odb"

Hello, 
I'm trying to make Wiener PCIVME link work with MIDAS. 
In documentation/VME dirvers/ it's saying: "wevmemm.c PCI/VME Wiener board
supported. (see Wiener PCI)".
Provided link is dead. Does anyone have that file? I would appreciate very very
much if someone could send it to me.

Thank you and best regards, 
L.P.

Good afternoon,

After updating Midas to the latest develop commit 
(0f5436d901a1dfaf6da2b94e2d87f870e3611cf1) we found out a bug when starting 
sequencer. If we have a simple loop from start value to stop value and step 
size, just printing the value at each iteration, we see everything good (see 
first attachment). Then we included another script though, which contains 
several subroutines we defined for our detector, and we try to run the same 
script. Unfortunately after this the parameters seem uninitialized, and the 
value at each loop does not make sense (see second attachment). Also, sometimes 
when pressing run the set parameter window would pop-up, but sometimes not.

The script is this one:

>>>
COMMENT Test script to check for a specific bug

INCLUDE global_basic_functions

#CALL setup_paths
#CALL generate_DUT_params

PARAM lv_start, "Start of LV", 1.8
PARAM lv_stop, "Stop of LV", 2.1
PARAM lv_step, "Step of LV", 0.02

n_iterations = (($lv_stop - $lv_start)/$lv_step)

MSG "Parameters:"
MSG $lv_start
MSG $lv_stop
MSG $lv_step
MSG $n_iterations

MSG "Start of looping"

LOOP n, $n_iterations
   lv_now = $lv_start + $n * $lv_step
   MSG $lv_now
   WAIT SECONDS, 1
ENDLOOP
<<<

and the only difference comes from commenting the line:

>>>
INCLUDE global_basic_functions
<<<

as global_basic_functions is defined as a LIBRARY and it includes 75 (!) 
subroutines...

Is it possible that when loading a large script it messes up the loading of 
parameters?

Thank you very much,
Regards,
Luigi.

It is pretty much the same as Stefan, I attach here the screenshots. Also in my case it works sometimes, and sometimes partially (one or 2 params, like in 
attachment 3).

> Could you please export and send me the /Sequencer ODB tree (or just /Sequencer/Param and /Sequencer/Variables) in both cases while the sequence is running. 
> 
> thanks,
> Zaher
> 
> 
> > Good afternoon,
> > 
> > After updating Midas to the latest develop commit 
> > (0f5436d901a1dfaf6da2b94e2d87f870e3611cf1) we found out a bug when starting 
> > sequencer. If we have a simple loop from start value to stop value and step 
> > size, just printing the value at each iteration, we see everything good (see 
> > first attachment). Then we included another script though, which contains 
> > several subroutines we defined for our detector, and we try to run the same 
> > script. Unfortunately after this the parameters seem uninitialized, and the 
> > value at each loop does not make sense (see second attachment). Also, sometimes 
> > when pressing run the set parameter window would pop-up, but sometimes not.
> > 
> > The script is this one:
> > 
> > >>>
> > COMMENT Test script to check for a specific bug
> > 
> > INCLUDE global_basic_functions
> > 
> > #CALL setup_paths
> > #CALL generate_DUT_params
> > 
> > PARAM lv_start, "Start of LV", 1.8
> > PARAM lv_stop, "Stop of LV", 2.1
> > PARAM lv_step, "Step of LV", 0.02
> > 
> > n_iterations = (($lv_stop - $lv_start)/$lv_step)
> > 
> > MSG "Parameters:"
> > MSG $lv_start
> > MSG $lv_stop
> > MSG $lv_step
> > MSG $n_iterations
> > 
> > MSG "Start of looping"
> > 
> > LOOP n, $n_iterations
> >    lv_now = $lv_start + $n * $lv_step
> >    MSG $lv_now
> >    WAIT SECONDS, 1
> > ENDLOOP
> > <<<
> > 
> > and the only difference comes from commenting the line:
> > 
> > >>>
> > INCLUDE global_basic_functions
> > <<<
> > 
> > as global_basic_functions is defined as a LIBRARY and it includes 75 (!) 
> > subroutines...
> > 
> > Is it possible that when loading a large script it messes up the loading of 
> > parameters?
> > 
> > Thank you very much,
> > Regards,
> > Luigi.

[quote="Zaher Salman"]I think that I finally managed to fix the problem. The default values of the parameters are now written first in one go, then the sequencer waits for confirmation that everything is completed before proceeding. Please test and let me know if there are still any issues. Zaher [/quote]

> I have the following problems after updating to midas SVN 4936: the history 
> system (web-page via mhttpd) seems to stop working. I checked the history files 
> themself and they are indeed written, except that the events ID's are not the 
> same anymore (I mean the ones defined under /Equipment/XXX/Common/Event ID), 
> rather the mlogger seems to choose an ID by itself.
> Currently the only way to get things working again was to recompile midas with 
> adding -DOLD_HISTORY to the CFLAGS which is troublesome since it is likely to be 
> forgotton with the next SVN update. When looking into the SVN I have the 
> impression there is something going on concerning the history system, however
> I couldn't find any documentation.
> What is the best practice for the future, in order not to run into any problems 
> but still being able to look at the old history (also from within the web-page 
> via mhttpd)?

Hi... 

Do you mind giving little more detail? We might have the same issue, where we got
complaints that midas history stops working after a certain time.

L

> > 
> > Do you mind giving little more detail? We might have the same issue, where we got
> > complaints that midas history stops working after a certain time.
> > 
> 
> 
> Yes, please do supply more information. What problems do *you* see?
> 
> 
> K.O.

Hi.

uhm, mine might be completely unrelated to this, but it just so happened that the rev.
4936 was one that was used in a recent experiment, in which there was complaints about
the responsiveness of the history plots. The history plots would take up to 30 seconds
to respond, if the run was about 30-40 minutes old. When the run is about  < 10 minutes
old , the history plot was responsive to within 1-2 seconds.

I received rather limited information regarding this problem. So hence my apprehension
on stating it as a *problem* or bug. It could be something related to hardware/beam etc.

Lee

> For our MIDAS installation at Fermilab, it is necessary that we be able to write to a PosgresQL 
> database (MySQL is not supported here). This will be required of both mlogger and mscb. 
> 
> Has anyone done this before? And do you know of a relatively simple way of implementing it, or do 
> we need to replicate the mysql functions that are already in the mlogger/mscb code to add functions 
> that perform the equivalent Posgres commands?
> 
> Thanks!
> Wes

Hi Wes

I did this a few years ago, and replicated the mysql functions within mlogger. 

Lee

Hi

> On one side, such checksums help me confirm that uncompressed data contents is the same as original 
> data (compression/decompression is okey).
> 

> I can write the computed checksums into midas.log, or into runNNN.crc32, runNNN.sha256, etc files. (or 
> both).
> 

Just a thought on my side. I have been using a checksum, on data produced  by our experiments via mlogger, the runxxxx.mid.gz, in 
the same manner you proposed and I see now implemented. 

I have a slight, objection, if I may call it that, to how the checksum is saved to disk, in 
run00007.mid.gz.sha256 as an example.


$ cat ~/Data/run00007.mid.gz.sha256
f315af7caf6ca204cc082132862cb4227d77066cb60c6e2b1039d6dc5b04d1ee 650597 Data/run00007.mid.gz


It seems a little misleading to have the gzip'd filename paired with the checksum of the uncompressed content.

May I suggest that the pairing should be ,

f315af7caf6ca204cc082132862cb4227d77066cb60c6e2b1039d6dc5b04d1ee  run00007.mid as an example.

As I find, this information will sit in an archive, database in my case for a long period, and it might
be confusing later on, when verification of the checksum is required.

Hi,

So I finally got around to "publish" work I did in 2009/2010 with RTEMS.

The work was mainly between myself and Till Straumann (SLAC), and Dr. Joel 
Sherill, to get VME support for vme universe/vme tsi148 ( basic support ), into 
the i386 bsp.

https://bitbucket.org/lcpool2/midas-k600/src/develop/ ( our rtems port ).


What this did was to allow us to run our various VME single board controllers, 
with a single frontend application.

It is still classified testing but its been very successful, so
far, and I hope to use it in the next experiment, if possible.

The midas port, contains a makefile, and some changes to the 
midas.c/system.c/mfe.c files. I've not tested  the full functionality
as I'm super time limited.

Hope this is help full to others...

> We're using the History Logger MIDAS feature and writing to mySQL tables, but 
> in some cases have run into issues installing mySQL on centos7 systems.
> 
> Has anyone ever tried running this MIDAS feature with MariaDB rather than 
> mySQL?

Hi

I've used MIDAS Logger feature with MariaDB and had no issue thus far .

Hi,

Thank you, commenting out the line worked and we can now compile the code. However, when we try to run ana.exe or anaDisplay.exe, we get the following errors:

Error in <TCling::RegisterModule>: cannot find dictionary module TMainDisplayWindowDict_rdict.pcm
Error in <TCling::RegisterModule>: cannot find dictionary module TRootanaDisplayDict_rdict.pcm
Error in <TCling::RegisterModule>: cannot find dictionary module TFancyHistogramCanvasDict_rdict.pcm
 

We see that the files are in /rootana/obj but we cannot find a way to point the compiler to them.

Could you please advise how to proceed,

Many thanks

> Hi Paolo,
> 
> Sorry for the slow response.  We were discussing this with Konstantin yesterday.  He is aware of the problem now and will be working on a solution soon.
> 
> In the short term I found that it works if you just comment out the offending line:
> 
> indnerlt:rootana lindner$ git diff libMidasInterface/TMidasOnline.cxx
> diff --git a/libMidasInterface/TMidasOnline.cxx b/libMidasInterface/TMidasOnline.cxx
> index 92eb3e9..67da613 100644
> --- a/libMidasInterface/TMidasOnline.cxx
> +++ b/libMidasInterface/TMidasOnline.cxx
> @@ -191,7 +191,7 @@ bool TMidasOnline::sleep(int mdelay)
>    #ifdef CH_IPC
>    ss_suspend_set_dispatch(CH_IPC, 0, NULL);
>    #else
> -  ss_suspend_set_dispatch_ipc(NULL);
> +  //  ss_suspend_set_dispatch_ipc(NULL);
>    #endif
>   int status = ss_suspend(mdelay, 0);
>    if (status == SS_SUCCESS)
> 
> This compiles and at least runs for me; so maybe that is helpful for you.  But Konstantin will provide a longer term solution.
> 
> 
> 
> > Hi,
> > 
> > I posted on the ROOTANA elog but there seems to be little activity there...
> > 
> > Could someone confirm if this is a bug?
> > https://midas.triumf.ca/elog/Rootana/14
> > 
> > Another user replied that they are encountering the same issue, so I think it is unlikely it is just our installation.
> > 
> > While ROOTANA is unusable for us, I tried to use the example Frontend and Analyzer (under the Experiment source folder). The analyzer does not seem to do much though. A root file is produced but nothing is placed into it. Is that normal?
> > 
> > Any help would be welcome.

I was planning to use the alarm system to display an information banner when a
certain valve is open, but I would like it to go away again when the valve is
closed.
Is there a way to achieve that? Maybe reset the alarm from an alarm script?
(Seems like a hack...)
Maybe this could be a useful feature, to be able to define an alarm class that
resets itself once the condition is no longer met?

I ported a bunch of frontends to C++ and now I'm occasionally getting this RPC 
error message:

http error: readyState: 4, HTTP status: 502 (Proxy Error), batch request: method: 
"db_get_values", params: [object Object], id: 1583456958869 method: "get_alarms", 
params: null, id: 1583456958869 method: "cm_msg_retrieve", params: [object 
Object], id: 1583456958869 method: "cm_msg_retrieve", params: [object Object], 
id: 1583456958869

I'm assuming I'm doing wrong something somewhere, but does this message contain 
information where to look? Does the ID mean something?

I am on branch develop and use the tmfe frontends. I found that a bool vector 
gets bigger every time I read it from the ODB.

Turns out in midasodb.cxx (as of commit 813f696, lines 478ff) the output vector 
"value" gets appended to without resizing.

Since after line 474 xvalue.size()==value.size() it would make sense to simply 
replace value->push_back() with value[i]= .