 01 Dec 2017, Stefan Ritt, Bug Report, small bug in mfe.c init
|
> There is a small bug in the mfe.c initialization for the EQ_POLLED mode. There
> is a routine where the number of polls fitting in eq_info->period is counted:
>
|
|
04 Dec 2017, Frederik Wauters, Bug Report, small bug in mfe.c init
|
> > There is a small bug in the mfe.c initialization for the EQ_POLLED mode. There
> > is a routine where the number of polls fitting in eq_info->period is counted:
> >
|
|
04 Dec 2017, Stefan Ritt, Bug Report, small bug in mfe.c init
|
> Thanks, I misunderstood the loop then. If poll_event(equipment[idx].info.source, (INT)count, TRUE); doesn`t do anything with "count", the loop becomes
infinite except for the overflow
> check.
|
 10 Jun 2020, Ivo Schulthess, Forum, slow-control equipment crashes when running multi-threaded on a remote machine
|
Dear all
To reduce the time needed by Midas between runs, we want to change some of our periodic equipment to multi-threaded slow-control equipment. To do that |
|
10 Jun 2020, Konstantin Olchanski, Forum, slow-control equipment crashes when running multi-threaded on a remote machine
|
Yes, it is supposed to crash. On a remote frontend, cm_get_path() cannot be used
(we are on a different computer, all filesystems maybe no the same!) and is actually not set and
triggers a trap if something tries to use it. (this is the crash you see).
|
|
10 Jun 2020, Stefan Ritt, Forum, slow-control equipment crashes when running multi-threaded on a remote machine
|
Few comments:
- As KO write, we might need semaphores also on a remote front-end, in case several programs share the same hardware. So it should work and cm_get_path() |
|
12 Jun 2020, Ivo Schulthess, Forum, slow-control equipment crashes when running multi-threaded on a remote machine
|
Thanks you two once again for the very fast answers. I tested the example on the local machine and it works perfectly fine. In the meantime I also created
two new drivers for our devices
and everything works with them, the improvement in time is significant and I will create drivers for all our devices where possible. If they are in a working |
|
10 Jan 2024, Pavel Murat, Forum, slow control frontends - how much do they sleep and how often their drivers are called?
|
Dear all,
I have implemented a number of slow control frontends which are directed to update the
|
|
11 Jan 2024, Stefan Ritt, Forum, slow control frontends - how much do they sleep and how often their drivers are called?
|
Put a
ss_sleep(10);
|
|
11 Jan 2024, Pavel Murat, Forum, slow control frontends - how much do they sleep and how often their drivers are called?
|
Hi Stefan, thanks a lot !
I just thought that for the EQ_SLOW type equipment calls to sleep() could be hidden in mfe.cxx
|
|
12 Jan 2024, Stefan Ritt, Forum, slow control frontends - how much do they sleep and how often their drivers are called?
|
> Hi Stefan, thanks a lot !
>
> I just thought that for the EQ_SLOW type equipment calls to sleep() could be hidden in mfe.cxx
|
|
28 Jan 2024, Konstantin Olchanski, Forum, slow control frontends - how much do they sleep and how often their drivers are called?
|
> I have implemented a number of slow control frontends which are directed to update the
> history once in every 10 sec, and they do just that.
|
|
10 May 2011, Jianglai Liu, Forum, simple example frontend for V1720
|
Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
10 May 2011, Stefan Ritt, Forum, simple example frontend for V1720
|
[quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
10 May 2011, Pierre-Andre Amaudruz, Forum, simple example frontend for V1720
|
[quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
18 May 2011, Jimmy Ngai, Forum, simple example frontend for V1720 
|
[quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
24 May 2011, Jianglai Liu, Forum, simple example frontend for V1720
|
Thanks all for the kind help. This did point me to the right direction. I was now able to make v1720.c as well as my MIDAS frontend (thanks to
Jimmy's example) talking to V1720, and read out the waveform bank.
|
|
10 Aug 2012, Carl Blaksley, Forum, simple example frontend for V1720
|
[quote="Jimmy Ngai"][quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
12 Aug 2012, Jimmy Ngai, Forum, simple example frontend for V1720
|
[quote="Carl Blaksley"][quote="Jimmy Ngai"][quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
13 Oct 2004, Konstantin Olchanski, Bug Report, silly odbedit "rename Display xxx/yyy"
|
odbedit command "rename Display xxx/yyy" creates a key named "xxx/yyy" (yes,
with a slash in the name) and this key cannot be deleted or renamed...
K.O. |