16:07:06 [Logger,INFO] Program Logger on host lem00 started
[local:nemu:S]/>q
[nemu@lem00 2014]$ odbedit -e nemu
odbedit: src/odb.c:753: db_update_open_record: Assertion `xkey->notify_count == pkey->notify_count' failed.
Aborted

I put mhttpd.css and mhttpd.js into the ODB, so every experiment can change it. I put also Andreas' modifications of the CSS file for the runlog table and 
committed the changes.

/Stefan

> Works, and here is how I did it. The attached example is based on the standard MIDAS
> example in "src/midas/examples/experiment". 

If you have such huge events, it does not make sense to put them into the ODB. The size needs to be increased (as 
you realized correctly) and the run stop takes long if you write last.xml. So just remove the RO_ODB flag in the 
frontend program and you won't have these problems.

/Stefan

Works, and here is how I did it. The attached example is based on the standard MIDAS
example in "src/midas/examples/experiment". 

My somewhat unsorted notes, haven't really tweaked the numbers. But it WORKS.

(1) mlogger writes "last.xml" (hard-coded!) which takes an awful amount of time
    as it writes the complete ODB containing the 10MB bank!
    just outcomment 
       // odb_save("last.xml");
    in mlogger.cxx, function 
    INT tr_start(INT run_number, char *error)
    (line ~3870 in mlogger rev. 5377, .cxx-file included)

(2) frontend.c:
     * the most important declarations are

/* BIG_DATA_BYTES is the data in 1 bank
   BIG_EVENT_SIZE is the event size. It's a bit larger than the bank size
                  because MIDAS needs to add some header bytes, I think
 */

#define BIG_DATA_BYTES  (10*1024*1024)   // 10 MB
#define BIG_EVENT_SIZE  (BIG_DATA_BYTES + 100)

/* maximum event size produced by this frontend */
INT max_event_size = BIG_EVENT_SIZE;

/* maximum event size for fragmented events (EQ_FRAGMENTED) */
INT max_event_size_frag = 5 * BIG_EVENT_SIZE;

/* buffer size to hold 10 events */
INT event_buffer_size = 10 * BIG_EVENT_SIZE;


     * bk_init() can hold at most 32kByte size events! Use bk_init32() instead.

     * complete frontend.c is attached

(3) in an xterm do
    # . setup.sh
    # odbedit -s 41943040
          (first invocation of odbedit must create large enough odb,
           otherwise you'll get "odb full" errors)
(4) odbedit> load big.odb      
    (attached). Essentials are:

    /Experiment/MAX_EVENT_SIZE = 20971520
    /Experiment/Buffer sizes/SYSTEM = 41943040   <- at least 2 events!

    To avoid excessive latecies when starting/stopping a run, do
    /Logger/ODB Dump = no 
    /Logger/Channels/0/Settings/ODB Dump = no 
     
    and create an Equipment Tree to make the mlogger happy

(5) a few more xterms, always ". setup.sh":
    # mlogger_patched (see (1))
    # ./frontend  (attched)

(6) in your odbedit (4) say "start". You should fill your disk rather quickly.

 > If I am not mistaken, the mhttpd.css is hard coded (path/name) into the mhttpd.

I agree that this should be removed, Unfortunately I'm away right now, so I will fix it next week. Also will put in 
Andreas' diffs.

/Stefan

Understand me right, I mostly like the new style, except the runlog as reported.
Attached you will find the diff's you were asking for. But as pointed out, I
haven't worked so far on CSS and hence this should be checked!!

I understand that the mhttpd.js needs to be the default one, however, mhttpd.css
might be left to the end-user to adopt to their specific needs. I shortly
checked in the mhttpd demon. It checks for the resources path in the ODB. If it
also would check for a CSS name, mhttpd.css could be changed/adopted by the
end-users without breaking things (at least it would then be their one business).

> > If I am not mistaken, the mhttpd.css is hard coded (path/name) into the mhttpd.
> 
> mhttpd.css is served from $MIDASSYS/resources/mhttpd.css. The actual path is
reported on the mhttpd 
> "help" page.
> 
> (I think the internal mhttpd.css and mhttpd.js should be removed as no longer
useful - nothing will work 
> right if the real mhttpd.js and mhttpd.css cannot be served).
> 
> > Especially the look and feel of the runlog is unsatisfactorily from my point
of view.
> 
> persons in charge of implementing the CSS stuff failed to convert quite a few
pages, for example, the elog 
> and the history editor pages were left completely broken. (mostly fixed now).
> 
> so thank you for reporting the runlog breakage, I hope Stefan & co can fix it
quickly. (I cannot do - I have 
> have no runlog pages on any of my test experiments).
> 
> > the old style was much more readable.
> 
> I think the new style is not too bad, except for a few visual artefacts here
and there, the general comment 
> that CSS is too complicated and hard to debug and the fact that over-subtle
colouring yields inconsistent 
> visuals between different monitors and ambient lighting conditions. (persons
who select the colours always 
> respond that "but to me, it looks just fine on my laptop", making it hard to
resolve any issues).
> 
> > I could recover the old style look and feel by slightly changing the mhttpd.cxx
> 
> If you post the patches that fix it for you, I can commit them to midas. (git
diff | mail olchansk@triumf.ca).
> 
> K.O.

> > 
> > I don't know if this actually fits the Bug Report category. I've been trying to install Midas on my Mac OS 
> > Mavericks and I keep getting errors like "conflicting types for '___builtin____strlcpy_chk' ..." and similarly for 
> > strlcat. I googled a bit and I think the problem might be that in Mavericks strlcat and strlcpy are already 
> > defined in string.h, and so there might be a redundant definition somewhere. I'm not sure what the best 
> > way to fix this would be though. Any help would be appreciated.
> > 
> 
> We have run into this problem - MacOS 10.9 plays funny games with definitions of strlcpy() & co - and it has been fixed since last Summer.
> 
> For the record, current MIDAS builds just fine on MacOS 10.9.2.
> 
> For a pure test, try the instructions posted at midas.triumf.ca:
> 
> cd $HOME
> mkdir packages
> cd packages
> git clone https://bitbucket.org/tmidas/midas
> git clone https://bitbucket.org/tmidas/mscb
> git clone https://bitbucket.org/tmidas/mxml
> cd midas
> make
> 
> K.O.

Thanks, it works like a charm now! I must have obtained an outdated version of Midas.

Andre

> 
> I don't know if this actually fits the Bug Report category. I've been trying to install Midas on my Mac OS 
> Mavericks and I keep getting errors like "conflicting types for '___builtin____strlcpy_chk' ..." and similarly for 
> strlcat. I googled a bit and I think the problem might be that in Mavericks strlcat and strlcpy are already 
> defined in string.h, and so there might be a redundant definition somewhere. I'm not sure what the best 
> way to fix this would be though. Any help would be appreciated.
> 

We have run into this problem - MacOS 10.9 plays funny games with definitions of strlcpy() & co - and it has been fixed since last Summer.

For the record, current MIDAS builds just fine on MacOS 10.9.2.

For a pure test, try the instructions posted at midas.triumf.ca:

cd $HOME
mkdir packages
cd packages
git clone https://bitbucket.org/tmidas/midas
git clone https://bitbucket.org/tmidas/mscb
git clone https://bitbucket.org/tmidas/mxml
cd midas
make

K.O.

> If I am not mistaken, the mhttpd.css is hard coded (path/name) into the mhttpd.

mhttpd.css is served from $MIDASSYS/resources/mhttpd.css. The actual path is reported on the mhttpd 
"help" page.

(I think the internal mhttpd.css and mhttpd.js should be removed as no longer useful - nothing will work 
right if the real mhttpd.js and mhttpd.css cannot be served).

> Especially the look and feel of the runlog is unsatisfactorily from my point of view.

persons in charge of implementing the CSS stuff failed to convert quite a few pages, for example, the elog 
and the history editor pages were left completely broken. (mostly fixed now).

so thank you for reporting the runlog breakage, I hope Stefan & co can fix it quickly. (I cannot do - I have 
have no runlog pages on any of my test experiments).

> the old style was much more readable.

I think the new style is not too bad, except for a few visual artefacts here and there, the general comment 
that CSS is too complicated and hard to debug and the fact that over-subtle colouring yields inconsistent 
visuals between different monitors and ambient lighting conditions. (persons who select the colours always 
respond that "but to me, it looks just fine on my laptop", making it hard to resolve any issues).

> I could recover the old style look and feel by slightly changing the mhttpd.cxx

If you post the patches that fix it for you, I can commit them to midas. (git diff | mail olchansk@triumf.ca).

K.O.

1. If I am not mistaken, the mhttpd.css is hard coded (path/name) into the mhttpd. Wouldn't it be beneficial to have ODB entries where to get is from? This way people could change the look and feel more freely.
   
2. Especially the look and feel of the runlog is unsatisfactorily from my point of view. See . The old style was much more readable. I could recover the old style look and feel by slightly changing the mhttpd.cxx where I changed in show_rawfile(const char*) "dialogTable" to "runlogTable" in the table class. This way I could tinker around with the mhttpd.css by adding the following stuff there:
   
   • adding .runlogTable in line 289 :
     
   • adding some style information for the runlogTable :
     

Hi,

I have been trying to use db_check_record() in order to verify that a subtree in the ODB has the correct 
variables, variable order, and overall size. I'm going off the documentation 
(https://midas.psi.ch/htmldoc/group__odbfunctionc.html) and use a string to compare against the ODB 
structure.  Since the string format is not specified for db_check_record(), I'm formatting my string 
according to the db_create_record() example.

Instead of db_check_record() checking the entire ODB subtree against all the variables represented in the 
string, I'm finding that only the first variable is checked.  The later variables in the string can be 
misspelled, out of order, or inexistent, and db_check_record() will still return 1.

Am I using db_check_record incorrectly?  

Thank you for any help with this issue.


I also believe that some of the documentation for db_check_record is outdated.  For example, init_string 
is referenced in the documentation but isn't part of the function definition.

Hi,

I don't know if this actually fits the Bug Report category. I've been trying to install Midas on my Mac OS 
Mavericks and I keep getting errors like "conflicting types for '___builtin____strlcpy_chk' ..." and similarly for 
strlcat. I googled a bit and I think the problem might be that in Mavericks strlcat and strlcpy are already 
defined in string.h, and so there might be a redundant definition somewhere. I'm not sure what the best 
way to fix this would be though. Any help would be appreciated.

Thanks,

Andre

I made a few minor modifications to the ODB JSON encoder and implemented a javascript "ls" function to 
report full ODB directory information as available from odbedit "ls -l" and the mhttpd odb editor page.

Using the new ODBMLs(), the existing ODBMCreate(), ODBMDelete() & etc a complete ODB editor can be 
written in Javascript (or in any other AJAX-capable language).

While implementing this function, I found some problems in the ODB JSON encoder when handling 
symlinks, also some problems with handling symlinks in odbedit and in the mhttpd ODB editor - these are 
now fixed.

Changes to the ODB JSON encoder:
- added the missing information to the ODB KEY (access_mode, notify_count)
- added symlink target information ("link")
- changed encoding of simple variable (i.e. jcopy of /experiment/name) - when possible (i.e. ODB KEY 
information is omitted), they are encoded as bare values (before, they were always encoded as structures 
with variable names, etc). This change makes it possible to implement ODBGet() and ODBMGet() using the 
AJAX jcopy method with JSON data encoding. Bare value encoding in ODBMCopy()/AJAX jcopy is enabled by 
using the "json-nokeys-nolastwritten" encoding option.

All these changes are supposed to be backward compatible (encoding used by ODBMCopy() for simple 
values and "-nokeys-nolastwritten" was previously not documented).

Documentation was updated:
https://midas.triumf.ca/MidasWiki/index.php/Mhttpd.js

K.O.

> I am not sure what to do with the javascript snippet 

Just read elog:908, it tells you to put this into a file, name it header.html for example, and put into the ODB:

/Custom/Header [string32] = header.html

make sure that you put the file into the directory indicated by /Custom/Path.

Cheers,
Stefan

> On most Linux systems, doxygen is easy to install. Red Hat instructions are here: 
> http://www.triumf.info/wiki/DAQwiki/index.php/SLinstall#Install_packages_needed_for_QUARTUS.2C_ROOT.2C_EPICS_and_MIDAS_DAQ
> 
> On MacOS, doxygen is easy to install via macports: sudo port install doxygen
> 
> > Is there a web site where one can see the generated graphs?
> 
> http://ladd00.triumf.ca/~olchansk/midas/index.html
> 
> there is no cron job to update this, but I may update it infrequently.
> 
> K.O.

Great, thanks a lot!

-Stefan

> > The capability to generate doxygen documentation of MIDAS was restored.
> > 
> > Use "make dox" and "make cleandox",
> > find generated documentation in ./html,
> > look at it via "firefox html/index.html".
> > 
> 
> To generate the files, you need doxygen installed which not everybody has.

On most Linux systems, doxygen is easy to install. Red Hat instructions are here: 
http://www.triumf.info/wiki/DAQwiki/index.php/SLinstall#Install_packages_needed_for_QUARTUS.2C_ROOT.2C_EPICS_and_MIDAS_DAQ

On MacOS, doxygen is easy to install via macports: sudo port install doxygen

> Is there a web site where one can see the generated graphs?

http://ladd00.triumf.ca/~olchansk/midas/index.html

there is no cron job to update this, but I may update it infrequently.

K.O.

> I'm looking into using MIDAS for an experiment that creates one large event
> (20MB or more) every second.

Hi, there - 20 Mbyte event at 1/sec is not so large these days. (Well, depending on your hardware).

Using typical 1-2 year old PC hardware, 20 M/sec to local disk should work right away. Sending data from a 
remote front end (through the mserver), or writing to a remote disk (NFS, etc) - will of course requre a GigE 
network connection.

By default, MIDAS is configured for using about 1-2 Mbyte events, so for your case, you will need to:

- increase the event size limits in your frontend,
- increase /Experiment/MAX_EVENT_SIZE in ODB
- increase the size of the SYSTEM event buffer (/Experiment/Buffer sizes/SYSTEM in ODB)

I generally recommend sizing the SYSTEM event buffer to hold a few seconds worth of data (ot 
accommodate any delays in writing to local disk - competing  reads, internal delays of the disks, etc).

So for 20 M/s, the SYSTEM buffer size should be about 40-60 Mbytes.

For your case, you also want to buffer 3-5-10 events, so the SYSTEM buffer size would be between 100 and 
200 MBytes.

Assuming you have between 8-16-32 GBytes of RAM, this should not be a problem.

One the other hand, if you are running on a low-power ("green") ARM system with 1 Gbyte of RAM and a 
1GHz CPU, you should be able to handle the data rate of 20 Mbytes/sec, as long as your network and 
storage can handle it - I see GigE ethernet running at about 30-40 Mbytes/sec, so you should be okey,
but local storage to SD flash is only about 10 Mbytes/sec - too slow. You can try USB-attached HDD or SSD, 
this should run at up to 30-40 Mbytes/sec. I would expect no problems with this rate from MIDAS, as long 
as you can fit into your 1 GByte of RAM - obviously your SYSTEM buffer will have to be a little smaller than 
on a full-featured PC.

More information on MIDAS event size limits is here (as already reported by Stefan)
https://midas.triumf.ca/MidasWiki/index.php/Event_Buffer

Let us know how it works out for you.

K.O.

I am not sure what to do with the javascript snippet - I understand it should be somehow connected to /Custom/Header, but if I create the /Custom/Header string, I cannot put this snippet 
into this string using odbedit - if I try to cut&paste it into odbedit, it is truncated to the first line - nor using the mhttpd odb editor - when I cut&paste it into the odb editor text entry box, it 
is truncated to the first 519 bytes (must be a hard limit somewhere). K.O.

> As reported in the bug tracker, the proposed header does not work if no specific (= different from the default 60 sec.) update period is specified, 
> since then no cookie is present. Here is the updated code which works for all cases:
> 
> 
> 
> <div id="footerDiv" class="footerDiv">
> <div style="display:inline; float:left;">MIDAS experiment "Test"</div>
> <div id="refr" style="display:inline; float:right;"></div>
> </div>
> <script type="text/javascript">
> var r = document.getElementById('refr');
> var now = new Date();
> var refr;
> if (document.cookie.search('midas_refr') == -1)
>    refr = 60;
> else {
>    var c = document.cookie.split('midas_refr=');
>    refr = c.pop().split(';').shift();
> }
> r.innerHTML = now.toString() + '&nbsp;&nbsp;&nbsp;' + 'Refr:' + refr;
> </script>
> 
> 
> 
> /Stefan

> Since several projects at PSI need MSCB but not MIDAS, I decided to separate the two repositories. So if you 
> need MIDAS with MSCB support inside mhttpd, you have to clone MIDAS, MXML and MSCB from bitbucket 
> (or the local clone at TRIUMF) as described in
> 
> https://midas.triumf.ca/MidasWiki/index.php/Main_Page#Download
> 
> I tried to fix all Makefiles to link to the new locations, but I'm not sure if I got all. So if something does not 
> compile please let me know.
> 
> -Stefan

After this split, Makefiles used to build experiment frontends need to be modified for the new location of the mscb tree:

replace
$(MIDASSYS)/mscb
with
$(MIDASSYS)/../mscb

K.O.

As reported in the bug tracker, the proposed header does not work if no specific (= different from the default 60 sec.) update period is specified, 
since then no cookie is present. Here is the updated code which works for all cases:



<div id="footerDiv" class="footerDiv">
<div style="display:inline; float:left;">MIDAS experiment "Test"</div>
<div id="refr" style="display:inline; float:right;"></div>
</div>
<script type="text/javascript">
var r = document.getElementById('refr');
var now = new Date();
var refr;
if (document.cookie.search('midas_refr') == -1)
   refr = 60;
else {
   var c = document.cookie.split('midas_refr=');
   refr = c.pop().split(';').shift();
}
r.innerHTML = now.toString() + '&nbsp;&nbsp;&nbsp;' + 'Refr:' + refr;
</script>



/Stefan