Works, and here is how I did it. The attached example is based on the standard MIDAS
example in "src/midas/examples/experiment". 

My somewhat unsorted notes, haven't really tweaked the numbers. But it WORKS.

(1) mlogger writes "last.xml" (hard-coded!) which takes an awful amount of time
    as it writes the complete ODB containing the 10MB bank!
    just outcomment 
       // odb_save("last.xml");
    in mlogger.cxx, function 
    INT tr_start(INT run_number, char *error)
    (line ~3870 in mlogger rev. 5377, .cxx-file included)

(2) frontend.c:
     * the most important declarations are

/* BIG_DATA_BYTES is the data in 1 bank
   BIG_EVENT_SIZE is the event size. It's a bit larger than the bank size
                  because MIDAS needs to add some header bytes, I think
 */

#define BIG_DATA_BYTES  (10*1024*1024)   // 10 MB
#define BIG_EVENT_SIZE  (BIG_DATA_BYTES + 100)

/* maximum event size produced by this frontend */
INT max_event_size = BIG_EVENT_SIZE;

/* maximum event size for fragmented events (EQ_FRAGMENTED) */
INT max_event_size_frag = 5 * BIG_EVENT_SIZE;

/* buffer size to hold 10 events */
INT event_buffer_size = 10 * BIG_EVENT_SIZE;


     * bk_init() can hold at most 32kByte size events! Use bk_init32() instead.

     * complete frontend.c is attached

(3) in an xterm do
    # . setup.sh
    # odbedit -s 41943040
          (first invocation of odbedit must create large enough odb,
           otherwise you'll get "odb full" errors)
(4) odbedit> load big.odb      
    (attached). Essentials are:

    /Experiment/MAX_EVENT_SIZE = 20971520
    /Experiment/Buffer sizes/SYSTEM = 41943040   <- at least 2 events!

    To avoid excessive latecies when starting/stopping a run, do
    /Logger/ODB Dump = no 
    /Logger/Channels/0/Settings/ODB Dump = no 
     
    and create an Equipment Tree to make the mlogger happy

(5) a few more xterms, always ". setup.sh":
    # mlogger_patched (see (1))
    # ./frontend  (attched)

(6) in your odbedit (4) say "start". You should fill your disk rather quickly.

> Works, and here is how I did it. The attached example is based on the standard MIDAS
> example in "src/midas/examples/experiment". 

If you have such huge events, it does not make sense to put them into the ODB. The size needs to be increased (as 
you realized correctly) and the run stop takes long if you write last.xml. So just remove the RO_ODB flag in the 
frontend program and you won't have these problems.

/Stefan

I want to let the run stop and start periodically. But I looked through the ODB
and didn't find anything may help. I also checked the FAQ online and didn't find
answer either. Who can help me? Thank you.

Hi Exaos,

This may help: https://ladd00.triumf.ca/elog/Midas/645

You need to set the following keys:
/Logger/Run duration
/Logger/Auto restart
/Logger/Auto restart delay

Regards,
Jimmy


> I want to let the run stop and start periodically. But I looked through the ODB
> and didn't find anything may help. I also checked the FAQ online and didn't find
> answer either. Who can help me? Thank you.

unsigned int EXPRT mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);

Read single data from VME bus. Useful for register access. See example in
mvme_open()

Parameters:
    	*vme 	  VME structure
    	vme_addr  source address (VME location).

Returns:
    MVME_SUCCESS

int EXPRT mvme_read_value(MVME_INTERFACE *mvme, mvme_addr_t vme_addr, unsigned int *var);

unsigned int EXPRT mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);

Read single data from VME bus. Useful for register access. See example in
mvme_open()

Parameters:
    	*vme 	  VME structure
    	vme_addr  source address (VME location).

Returns:
    MVME_SUCCESS

int EXPRT mvme_read_value(MVME_INTERFACE *mvme, mvme_addr_t vme_addr, unsigned int *var);

  printf("%d\n", mvme_read_value(...)); 

  unsigned long d;
  mvme_read_value(..., &d);
  printf("%d\n", d);

  status = mvme_read(..., &d, adr, 4); 

> uint32_t mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
> Question: How to distinguish the status and value returned?

On VME interfaces using the Universe and tsi148 PCI-VME bridges, your question has no meaning.

The VME address space is directly mapped into the PCI address space, then mmap()ed into your 
program address space. Internally mvme_read_value() is "return *(uint32_t*)(mmap_base + vme_addr);" 
and there is no such thing as "status".

Physically on the VME bus, for single-word VME cycles (mvme_read_value), there are only 2 error 
conditions, an AS or a DS timeout, and these bridges return the bit pattern 0xFFFFFFFF for either error, 
the same as the traditional VME bus always worked (i.e. before PCI, before ISA, back when the VME bus 
*was* the main CPU-memory-IO bus).

So the answer to your question is "yes". If mvme_read_value() returned 0xFFFFFFFF, there was a VME 
bus timeout because the board you are trying to address a) is not installed, b) was unplugged, c) does 
not decode the address you tried to access (maybe you used the wrong AM code or the wrong data 
width).

With Universe and tsi148 PCI-VME bridges, the mvme_read() call runs the DMA interface that can issue 
block transfer cycles on the VME bus. These DMA interfaces have interesting error handling, but 
basically, they only tell you the estimated VME address at which the AS or DS timeout or BERR has 
occurred. For sane VME boards, DMA errors mean very basic breakage of the VME crate and VME board.

With non-directly attached VME interfaces, i.e. the SIS3100, you can also have communication errors. I 
do not know how those are reported by the SIS3100 Linux drivers, and I do not know how the MIDAS 
driver reports them. But I do know that if you see those errors, your interface is very broken and VME 
bus errors are the least of your worries.

P.S. There also exist PCI bus errors, they also return the bit pattern 0xFFFFFFFF and mean basic 
breakage inside your computer. PCI-PCI and PCI-host bridges have special registers you can read to 
find out the exact cause of the error ("your computer is broken").

K.O.

Big thanks to Peter Kunz - specifically when using the CAEN libraries:

>
> After upgrading to the lastes MIDAS version I got the DAQ frontend of my application running by
> changing all compiler directives from cc to g++ and using
>
> #include "mfe.h"
>
> extern HNDLE hDB
> 
>  extern "C" { 
>  #include <CAENComm.h>  
>  }
>
> With these changes everything seems to work fine.
>


K.O.



> > To convert a MIDAS frontend to C++ follow this checklist:
> 
> Pierre A.-A. reminded me that include files for CAEN libraries have  to
> use "extern C" brackets:
> 
> some 3rd party libraries (CAEN, etc) are written in C (or require C linkage),
> if their include files are not C++ compatible (do not have "extern C" brackets
> for all exported symbols), the experiment frontend code must say something like this:
> 
> extern "C" {
> #include "3rd-party-c-library.h"
> }
> 
> Note: "#ifdef cplusplus" is not needed because we already know we are C++, not C.
> 
> K.O.

Ok, so the detail that I missed was that the dummy functions

INT poll_event(INT source[], INT count, BOOL test)
{
   return 1;
};

as shown in some of the older examples, work when you set

INT poll_event(INT source, INT count, BOOL test)
{
   return 1;
};


as a side comment, not all drivers are c++ compatible yet (e.g. mscbvr), so changes needed are small 

> as a side comment, not all drivers are c++ compatible yet (e.g. mscbvr), so changes needed are small 

Right. We recently switched the whole midas to c++, but we could not cover all drivers. Most of them just need some type 
casting to compile under c++. I got already patches from several people which I'm happy to merge in. If you got mscbhvr 
or any other driver compile under c++, please send me the diff.

Stefan

> 
> Ok, so the detail that I missed was that the dummy functions
> 
> INT poll_event(INT source[], INT count, BOOL test)
> {
>    return 1;
> };
> 
> as shown in some of the older examples, work when you set
> 
> INT poll_event(INT source, INT count, BOOL test)
> {
>    return 1;
> };

If you would have read elog:1526 more carefully (point a4) you would have saved yourself a lot of time.

Stefan

To convert a MIDAS frontend to C++ follow this checklist:

a) add #include "mfe.h" after include of midas.h and fix all compilation errors.

NOTE: there should be no "extern C"  brackets around MIDAS include files.

NOTE: Expect to see following problems:

a1) duplicate or mismatched declarations of functions defined in mfe.h
a2) frontend_name and frontend_file_name should be "const char*" instead of "char*"
a3) duplicate "HNDLE hDB" collision with hDB from mfe.c - not sure why it worked before, either use HNDLE hDB from mfe.h or use "extern HNDLE hDB".
a4) poll_event() and interrupt_configure() have "source" as "int[]" instead of "int" (why did this work before?)
a5) use of "extern int frontend_index" instead of get_frontend_index() from mfe.h
a6) bk_create() last argument needs to be cast to (void**)
a7) "bool debug" collides with "debug" from mfe.h (why did this work before?)

b) remove no longer needed "extern C" brackets around mfe related code. Ideally there should be no "extern C" brackets anywhere.

c) in the Makefile, change CC=gcc to CC=g++ for compiling and linking everything as C++

c1) fix all compilation problems. most valid C code will compile as valid C++, but there is some known trouble:
- return value of malloc() & co needs to be cast to the correct data type: "char* s = (char*)malloc(...)"
- some C++ compilers complain about mismatch between signed and unsigned values

If you need help with converting your frontend from C to C++, I will be most happy
to assist you - post your compiler error messages to this forum or email them to me privately.

Good luck,
K.O.

> To convert a MIDAS frontend to C++ follow this checklist:

Pierre A.-A. reminded me that include files for CAEN libraries have  to
use "extern C" brackets:

some 3rd party libraries (CAEN, etc) are written in C (or require C linkage),
if their include files are not C++ compatible (do not have "extern C" brackets
for all exported symbols), the experiment frontend code must say something like this:

extern "C" {
#include "3rd-party-c-library.h"
}

Note: "#ifdef cplusplus" is not needed because we already know we are C++, not C.

K.O.

I am moving our fe code to c++ midas with cmake. I did encounter your a) problems.

How do I solve mismatched declarations in the mfe (or other places in the midas code)? It is having issues with the midas defined BOOL/... types. This 
is what I get for a minimal scfe:

[ 12%] Building CXX object CMakeFiles/sc_fe_mini.dir/sc_fe_mini.cpp.o
[ 25%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/class/hv.cxx.o
[ 37%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/class/multi.cxx.o
[ 50%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/device/nulldev.cxx.o
[ 62%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/bus/null.cxx.o
[ 75%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/device/mscbdev.cxx.o
[ 87%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/mscb/src/mscb.cxx.o
[100%] Linking CXX executable sc_fe_mini
/home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `_readout_thread':
/home/frederik/packages/midas/src/mfe.cxx:1271: undefined reference to `poll_event(int, int, unsigned int)'
/home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `check_polled_events':
/home/frederik/packages/midas/src/mfe.cxx:1601: undefined reference to `poll_event(int, int, unsigned int)'
/home/frederik/packages/midas/src/mfe.cxx:1643: undefined reference to `poll_event(int, int, unsigned int)'
/home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `readout_enable(unsigned int)':
/home/frederik/packages/midas/src/mfe.cxx:1158: undefined reference to `interrupt_configure(int, int, long)'
/home/frederik/packages/midas/src/mfe.cxx:1156: undefined reference to `interrupt_configure(int, int, long)'
/home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `initialize_equipment':
/home/frederik/packages/midas/src/mfe.cxx:614: undefined reference to `interrupt_configure(int, int, long)'
/home/frederik/packages/midas/src/mfe.cxx:649: undefined reference to `poll_event(int, int, unsigned int)'
/home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `scheduler':
/home/frederik/packages/midas/src/mfe.cxx:1890: undefined reference to `poll_event(int, int, unsigned int)'
/home/frederik/packages/midas/src/mfe.cxx:1932: undefined reference to `poll_event(int, int, unsigned int)'
/home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `main':
/home/frederik/packages/midas/src/mfe.cxx:2701: undefined reference to `interrupt_configure(int, int, long)'
/home/frederik/packages/midas/src/mfe.cxx:2702: undefined reference to `interrupt_configure(int, int, long)'
collect2: error: ld returned 1 exit status
make[2]: *** [sc_fe_mini] Error 1
make[1]: *** [CMakeFiles/sc_fe_mini.dir/all] Error 2
make: *** [all] Error 2


This is my cmakelists for my user code:

#
# cmake for the muX software
#
cmake_minimum_required(VERSION 3.3)

project(muX)

#
# find installations
#
set(MIDAS_DIR $ENV{MIDASSYS})
message("MIDAS dir: " ${MIDAS_DIR})

#
# set directories
#
set(MIDASBUILD_DIR ${MIDAS_DIR}/build)
set(MIDASINCLUDE_DIR ${MIDAS_DIR}/include)
set(MXML_DIR ${MIDAS_DIR}/mxml)
set(MSCB_DIR ${MIDAS_DIR}/mscb)
set(DRV_DIR ${MIDAS_DIR}/drivers)


#
# drivers, libs
#
set(DRIVERS
    ${MIDAS_DIR}/drivers/class/hv
    ${MIDAS_DIR}/drivers/class/multi
    ${MIDAS_DIR}/drivers/device/nulldev
    ${MIDAS_DIR}/drivers/bus/null
)
set(MIDASLIB ${MIDASBUILD_DIR}/libmidas.a)
set(FELIB ${MIDASBUILD_DIR}/libmfe.a)

#
# sc_fe
#
add_executable(sc_fe_mini
        sc_fe_mini.cpp
        ${DRIVERS}
        ${MIDAS_DIR}/drivers/device/mscbdev
        ${MIDAS_DIR}/mscb/src/mscb)

target_include_directories(sc_fe_mini PRIVATE ${DRV_DIR} ${MIDAS_DIR}/mscb/include ${MIDAS_DIR}/include)
target_link_libraries(sc_fe_mini ${LIBS} ${MIDASLIB} ${FELIB} rt pthread util)



I seem to be able to compile the current midas distributions, including the scfe frontend



> To convert a MIDAS frontend to C++ follow this checklist:
> 
> a) add #include "mfe.h" after include of midas.h and fix all compilation errors.
> 
> NOTE: there should be no "extern C"  brackets around MIDAS include files.
> 
> NOTE: Expect to see following problems:
> 
> a1) duplicate or mismatched declarations of functions defined in mfe.h
> a2) frontend_name and frontend_file_name should be "const char*" instead of "char*"
> a3) duplicate "HNDLE hDB" collision with hDB from mfe.c - not sure why it worked before, either use HNDLE hDB from mfe.h or use "extern HNDLE hDB".
> a4) poll_event() and interrupt_configure() have "source" as "int[]" instead of "int" (why did this work before?)
> a5) use of "extern int frontend_index" instead of get_frontend_index() from mfe.h
> a6) bk_create() last argument needs to be cast to (void**)
> a7) "bool debug" collides with "debug" from mfe.h (why did this work before?)
> 
> b) remove no longer needed "extern C" brackets around mfe related code. Ideally there should be no "extern C" brackets anywhere.
> 
> c) in the Makefile, change CC=gcc to CC=g++ for compiling and linking everything as C++
> 
> c1) fix all compilation problems. most valid C code will compile as valid C++, but there is some known trouble:
> - return value of malloc() & co needs to be cast to the correct data type: "char* s = (char*)malloc(...)"
> - some C++ compilers complain about mismatch between signed and unsigned values
> 
> If you need help with converting your frontend from C to C++, I will be most happy
> to assist you - post your compiler error messages to this forum or email them to me privately.
> 
> Good luck,
> K.O.

Did you include mfe.h as written in elog:1526 ?

Stefan

> Did you include mfe.h as written in elog:1526 ?
> 
> Stefan


Yes I did

this is my include 

#include <stdio.h>
#include <string.h>
#include <assert.h>
#include <math.h>
#include <pthread.h>


#include "midas.h"
#include "mscb.h"
#include "multi.h"
#include "mscbdev.h"
#include "mfe.h"

(I attach my dummy fe)

What confuses me is that I can compile examples/experiment/ if I copy that to a 
fresh dir.

I also copied the CMakeLists from the example:

#
# cmake for the muX software
#
cmake_minimum_required(VERSION 3.3)

project(muX)

#
# find midas installation, from CMakeLists in examples/experiment
#
set(MIDAS_DIR $ENV{MIDASSYS})
message("MIDAS dir: " ${MIDAS_DIR})
if (NOT EXISTS $ENV{MIDASSYS})
  message(FATAL_ERROR "Environment variable $MIDASSYS not defined, aborting.")
endif()

set(INC_PATH ${MIDAS_DIR}/include ${MIDAS_DIR}/mxml ${MIDAS_DIR}/mscb/include 
${MIDAS_DIR}/drivers/class ${MIDAS_DIR}/drivers/device)
link_directories($ENV{MIDASSYS}/lib)

# enable certain compile warnings
add_compile_options(-Wall -Wformat=2 -Wno-format-nonliteral -Wno-strict-
aliasing -Wuninitialized -Wno-unused-function)

set(LIBS -lpthread -lutil -lrt) 


add_executable(sc_fe_mini sc_fe_mini.cpp)
target_include_directories(sc_fe_mini PRIVATE ${INC_PATH})
target_link_libraries(sc_fe_mini mfe midas ${LIBS})

Have you left any "extern C" in your frontend program or in any of the used header file. Seems 
like the linker cannot find the poll_event in your frontend code. If it's there, but it's compiled 
with C calling (instead of C++), the name mangling causes it to be invisible to the linker. That 
usually happens if there is somewhere

extern C {
  INT poll_event();
  ... 
}

while it is NOT defined as "extern C" in mfe.h which is used by mfe.cxx.

Stefan

> > Did you include mfe.h as written in elog:1526 ?
> > 
> > Stefan
> 
> 
> Yes I did
> 
> this is my include 
> 
> #include <stdio.h>
> #include <string.h>
> #include <assert.h>
> #include <math.h>
> #include <pthread.h>
> 
> 
> #include "midas.h"
> #include "mscb.h"
> #include "multi.h"
> #include "mscbdev.h"
> #include "mfe.h"
> 
> (I attach my dummy fe)
> 
> What confuses me is that I can compile examples/experiment/ if I copy that to a 
> fresh dir.
> 
> I also copied the CMakeLists from the example:
> 
> #
> # cmake for the muX software
> #
> cmake_minimum_required(VERSION 3.3)
> 
> project(muX)
> 
> #
> # find midas installation, from CMakeLists in examples/experiment
> #
> set(MIDAS_DIR $ENV{MIDASSYS})
> message("MIDAS dir: " ${MIDAS_DIR})
> if (NOT EXISTS $ENV{MIDASSYS})
>   message(FATAL_ERROR "Environment variable $MIDASSYS not defined, aborting.")
> endif()
> 
> set(INC_PATH ${MIDAS_DIR}/include ${MIDAS_DIR}/mxml ${MIDAS_DIR}/mscb/include 
> ${MIDAS_DIR}/drivers/class ${MIDAS_DIR}/drivers/device)
> link_directories($ENV{MIDASSYS}/lib)
> 
> # enable certain compile warnings
> add_compile_options(-Wall -Wformat=2 -Wno-format-nonliteral -Wno-strict-
> aliasing -Wuninitialized -Wno-unused-function)
> 
> set(LIBS -lpthread -lutil -lrt) 
> 
> 
> add_executable(sc_fe_mini sc_fe_mini.cpp)
> target_include_directories(sc_fe_mini PRIVATE ${INC_PATH})
> target_link_libraries(sc_fe_mini mfe midas ${LIBS})

Can you post the exact command that cmake executes to link sc_fe_mini (with make VERBOSE=1)?

I have noticed similar linking problems that depended on the order when linking. In my case, it 
compiled when "-lpthread -lutil -lrt" were at the end of the command, but not before mfe.o and 
libmidas.a. Unfortunately I haven't found a way to tell cmake the "correct" order of the link 
libraries.

Maybe this can be fixed by adding midas as a subdirectory in your cmake project and just linking 
against the "mfe" target instead of libmfe.a.

> How do I solve mismatched declarations in the mfe (or other places in the midas code)?

I run into such problems all the time. My solution? I grep for the function name in my code and in the header file,
then look very carefully at the definition to confirm that all the argument declarations are the same in both
places. Sometimes my eyes do not see the difference and I ask for a "second pair of eyes".

In your case, you have a mismatch between functions in mfe.h and in your frontend. The difference
is "int source" in mfe.h and "int source[]" in your code.

Because C++ permits functions with identical namesm but different arguments, the compiler thinks
you did this on purpose and does not complain. Later, of course, the linker bombs,
but all it can report at this stage, is what you see "function not found"... Then you grep your code
for the missing function, check arguments, rinse, repeat.

Before C++, the C compiler would probably had complained about the mismatch, except that MIDAS
did not have an mfe.h header file definitions for all this stuff until just now, so again, the mismatch would
have gone unnoticed, unfixed.

K.O.



> It is having issues with the midas defined BOOL/... types. This 
> is what I get for a minimal scfe:
> 
> [ 12%] Building CXX object CMakeFiles/sc_fe_mini.dir/sc_fe_mini.cpp.o
> [ 25%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/class/hv.cxx.o
> [ 37%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/class/multi.cxx.o
> [ 50%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/device/nulldev.cxx.o
> [ 62%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/bus/null.cxx.o
> [ 75%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/drivers/device/mscbdev.cxx.o
> [ 87%] Building CXX object CMakeFiles/sc_fe_mini.dir/home/frederik/packages/midas/mscb/src/mscb.cxx.o
> [100%] Linking CXX executable sc_fe_mini
> /home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `_readout_thread':
> /home/frederik/packages/midas/src/mfe.cxx:1271: undefined reference to `poll_event(int, int, unsigned int)'
> /home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `check_polled_events':
> /home/frederik/packages/midas/src/mfe.cxx:1601: undefined reference to `poll_event(int, int, unsigned int)'
> /home/frederik/packages/midas/src/mfe.cxx:1643: undefined reference to `poll_event(int, int, unsigned int)'
> /home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `readout_enable(unsigned int)':
> /home/frederik/packages/midas/src/mfe.cxx:1158: undefined reference to `interrupt_configure(int, int, long)'
> /home/frederik/packages/midas/src/mfe.cxx:1156: undefined reference to `interrupt_configure(int, int, long)'
> /home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `initialize_equipment':
> /home/frederik/packages/midas/src/mfe.cxx:614: undefined reference to `interrupt_configure(int, int, long)'
> /home/frederik/packages/midas/src/mfe.cxx:649: undefined reference to `poll_event(int, int, unsigned int)'
> /home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `scheduler':
> /home/frederik/packages/midas/src/mfe.cxx:1890: undefined reference to `poll_event(int, int, unsigned int)'
> /home/frederik/packages/midas/src/mfe.cxx:1932: undefined reference to `poll_event(int, int, unsigned int)'
> /home/frederik/packages/midas/build/libmfe.a(mfe.cxx.o): In function `main':
> /home/frederik/packages/midas/src/mfe.cxx:2701: undefined reference to `interrupt_configure(int, int, long)'
> /home/frederik/packages/midas/src/mfe.cxx:2702: undefined reference to `interrupt_configure(int, int, long)'
> collect2: error: ld returned 1 exit status
> make[2]: *** [sc_fe_mini] Error 1
> make[1]: *** [CMakeFiles/sc_fe_mini.dir/all] Error 2
> make: *** [all] Error 2
> 
> 
> This is my cmakelists for my user code:
> 
> #
> # cmake for the muX software
> #
> cmake_minimum_required(VERSION 3.3)
> 
> project(muX)
> 
> #
> # find installations
> #
> set(MIDAS_DIR $ENV{MIDASSYS})
> message("MIDAS dir: " ${MIDAS_DIR})
> 
> #
> # set directories
> #
> set(MIDASBUILD_DIR ${MIDAS_DIR}/build)
> set(MIDASINCLUDE_DIR ${MIDAS_DIR}/include)
> set(MXML_DIR ${MIDAS_DIR}/mxml)
> set(MSCB_DIR ${MIDAS_DIR}/mscb)
> set(DRV_DIR ${MIDAS_DIR}/drivers)
> 
> 
> #
> # drivers, libs
> #
> set(DRIVERS
>     ${MIDAS_DIR}/drivers/class/hv
>     ${MIDAS_DIR}/drivers/class/multi
>     ${MIDAS_DIR}/drivers/device/nulldev
>     ${MIDAS_DIR}/drivers/bus/null
> )
> set(MIDASLIB ${MIDASBUILD_DIR}/libmidas.a)
> set(FELIB ${MIDASBUILD_DIR}/libmfe.a)
> 
> #
> # sc_fe
> #
> add_executable(sc_fe_mini
>         sc_fe_mini.cpp
>         ${DRIVERS}
>         ${MIDAS_DIR}/drivers/device/mscbdev
>         ${MIDAS_DIR}/mscb/src/mscb)
> 
> target_include_directories(sc_fe_mini PRIVATE ${DRV_DIR} ${MIDAS_DIR}/mscb/include ${MIDAS_DIR}/include)
> target_link_libraries(sc_fe_mini ${LIBS} ${MIDASLIB} ${FELIB} rt pthread util)
> 
> 
> 
> I seem to be able to compile the current midas distributions, including the scfe frontend
> 
> 
> 
> > To convert a MIDAS frontend to C++ follow this checklist:
> > 
> > a) add #include "mfe.h" after include of midas.h and fix all compilation errors.
> > 
> > NOTE: there should be no "extern C"  brackets around MIDAS include files.
> > 
> > NOTE: Expect to see following problems:
> > 
> > a1) duplicate or mismatched declarations of functions defined in mfe.h
> > a2) frontend_name and frontend_file_name should be "const char*" instead of "char*"
> > a3) duplicate "HNDLE hDB" collision with hDB from mfe.c - not sure why it worked before, either use HNDLE hDB from mfe.h or use "extern HNDLE hDB".
> > a4) poll_event() and interrupt_configure() have "source" as "int[]" instead of "int" (why did this work before?)
> > a5) use of "extern int frontend_index" instead of get_frontend_index() from mfe.h
> > a6) bk_create() last argument needs to be cast to (void**)
> > a7) "bool debug" collides with "debug" from mfe.h (why did this work before?)
> > 
> > b) remove no longer needed "extern C" brackets around mfe related code. Ideally there should be no "extern C" brackets anywhere.
> > 
> > c) in the Makefile, change CC=gcc to CC=g++ for compiling and linking everything as C++
> > 
> > c1) fix all compilation problems. most valid C code will compile as valid C++, but there is some known trouble:
> > - return value of malloc() & co needs to be cast to the correct data type: "char* s = (char*)malloc(...)"
> > - some C++ compilers complain about mismatch between signed and unsigned values
> > 
> > If you need help with converting your frontend from C to C++, I will be most happy
> > to assist you - post your compiler error messages to this forum or email them to me privately.
> > 
> > Good luck,
> > K.O.

I add the following to makefile and try to treat Darwin as FreeBSD/Linux.
But I failed.
============ 
#-----------------------
# This is for MacOS X
#
ifeq ($(OSTYPE), Darwin)
CC = gcc
OS_DIR = Darwin
OSFLAGS = -DOS_DARWIN -DOS_LINUX
LIBS = -lbsd -lcompat
SPECIFIC_OS_PRG =
endif
============

I got the following errors:
=============
gcc -c -g -O2 -Wall -Iinclude -Idrivers -LDarwin/lib -DINCLUDE_FTPLIB  
-DOS_DARWIN -DOS_FREEBSD -o Darwin/lib/midas.o src/midas.c
In file included from include/midasinc.h:45,
                 from include/msystem.h:114,
                 from src/midas.c:623:
/usr/include/string.h:112: error: conflicting types for `strlcat'
include/midas.h:1701: error: previous declaration of `strlcat'
/usr/include/string.h:113: error: conflicting types for `strlcpy'
include/midas.h:1700: error: previous declaration of `strlcpy'
In file included from include/msystem.h:114,
                 from src/midas.c:623:
include/midasinc.h:161:21: sys/vfs.h: No such file or directory
include/midasinc.h:164:17: pty.h: No such file or directory
src/midas.c:780: error: conflicting types for `dbg_malloc'
include/midas.h:1478: error: previous declaration of `dbg_malloc'
src/midas.c:817: error: conflicting types for `dbg_calloc'
include/midas.h:1479: error: previous declaration of `dbg_calloc'
src/midas.c:858: error: conflicting types for `strlcpy'
/usr/include/string.h:113: error: previous declaration of `strlcpy'
src/midas.c:892: error: conflicting types for `strlcat'
/usr/include/string.h:112: error: previous declaration of `strlcat'
gmake: *** [Darwin/lib/midas.o] Error 1
==========

Could anyone give me some hints. Thanks!