/opt/DAQ/bot/midas/src/history_odbc.cxx: In member function 'virtual int 
SqlODBC::GetNumRows()':
/opt/DAQ/bot/midas/src/history_odbc.cxx:589: error: cannot convert 'SQLINTEGER*' 
to 'long int*' for argument '2' to 'SQLRETURN SQLRowCount(void*, long int*)'
/opt/DAQ/bot/midas/src/history_odbc.cxx: In member function 'virtual const char* 
SqlODBC::GetColumn(int)':
/opt/DAQ/bot/midas/src/history_odbc.cxx:638: error: cannot convert 'SQLINTEGER*' 
to 'long int*' for argument '6' to 'SQLRETURN SQLGetData(void*, SQLUSMALLINT, 
SQLSMALLINT, void*, long int, long int*)'
make[2]: *** [CMakeFiles/midas-static.dir/src/history_odbc.cxx.o] Error 1
make[2]: Leaving directory `/opt/DAQ/bot/midas/build'
make[1]: *** [CMakeFiles/midas-static.dir/all] Error 2
make[1]: Leaving directory `/opt/DAQ/bot/midas/build'

> Ok, I added a command
> 
> odbedit -c "create STRING Test[8][40]"
> 
> which works now. Please update to SVN revision 4555 of odbedit.c
> 
> - Stefan

If I want to create only one string, should I write like this:

  odbedit -c "create STRING Test[] [256]"

OK. I need it. I will try the new odbedit.

Another problem while using odbedit.
I tried the batch mode of "odbedit". I created a key as "/A_Str" by mistake and 
wanted to delete it. Then "odbedit" failed to accept the "Return" key. Please see 
the screen-shot attached. :-(

> I tried to use odbedit to set the "/System/Prompt" to "%h:%e:%s %p> " and got a
> problem: pressing "Return" doesn't work any more. But "[%h:%e:%s]%p> " works fine.
> Please see the attachment.

I fixed that problem in SVN revision 4556. It occurred when the prompt does start with a 
'%' which nobody tried before...

I write some configure file to build MIDAS using CMake. The usage is simple:
1. Unzip the attachment, copy "CMakeLists.txt" and directory "cmake" into the
midas source tree.
   $ cp -rp CMakeLists.txt cmake/  <PATH-TO-MIDAS>/
2. make a separate directory, such as "build". It's a good habit to build a
project without polluting the source tree. :-)
   $ mkdir build
3. Executing cmake
   $ cd build && cmake <PATH-TO-MIDAS>
4. Make
   $ make

Or, you can generate Xcode project files:
  $ cmake -G Xcode <PATH-TO-MIDAS>
or using visual studio
  $ cmake -G "Visual Studio" <PATH-TO-MIDAS>
(I havn't Visual Studio and windows, so the above command is not tested.)
or using other IDEs, such as KDevelop3, Eclipse, etc, just type:
  $ cmake -G "KDevelop3" <PATH-TO-MIDAS>
or
  $ cmake -G "Eclipse CDT4" <PATH-TO-MIDAS>


I test the configure file with GNU make and CMake 2.6.4 on Debian Lenny. I
havn't add installation commands now. Maybe later. If anyone interests in it, I
may check it again. Anyway, I'm using it.

I tried to use odbedit to set the "/System/Prompt" to "%h:%e:%s %p> " and got a
problem: pressing "Return" doesn't work any more. But "[%h:%e:%s]%p> " works fine.
Please see the attachment.

> Hi,
> I am writing shell scripts to create some tree structure in an ODB. When 
> creating an array of strings, the default length of each string element is 32 
> characters. If odbedit is used interactively to create the array of strings, 
> the user is prompted to enter a different length if desired. But if the 
> command odbedit is called from a shell script, I did not succeed in passing 
> the argument to get a different length.
> I tried:
> odbedit -c "create STRING Test[8][40]"
> Or:
> odbedit -c "create STRING Test[8] 40"
> Or:
> odbedit -c "create STRING Test[8] \n 40"
> etc. all produce an array of 8 strings with 32 characters each.
> I haven't tried all possible syntaxes, but I suspect the length argument is 
> dropped. If it has not been fixed in a later release than the one I am using, 
> could this problem be looked at?

Ok, I added a command

odbedit -c "create STRING Test[8][40]"

which works now. Please update to SVN revision 4555 of odbedit.c

- Stefan

> Dear All,
> 
> I'm using SL5 and MIDAS rev 4528. Occasionally, when I stop a run in odbedit, 
> a timeout would occur: 
> [midas.c:9496:rpc_client_call,ERROR] rpc timeout after 121 sec, routine 
> = "rc_transition", host = "computerB", connection closed
> Error: Unknown error 504 from client 'Frontend' on host computerB
> 
> This error seems to be random without any reason or pattern. After this error 
> occurs, I cannot start or stop any run. Sometime restarting MIDAS can bring 
> the system working again, but sometime not.
> 
> Another transition timeout occurs after I change any ODB value using the web 
> interface:
> [midas.c:8291:rpc_client_connect,ERROR] timeout on receive remote computer 
> info: 
> [midas.c:3642:cm_transition,ERROR] cannot connect to client "Frontend" on host 
> computerB, port 36255, status 503
> Error: Cannot connect to client 'Frontend'
> 
> This error is reproducible: start run -> change ODB value within webpage -> 
> stop run -> timeout!

A few hints for debugging:

- do the run stop via odbedit and the "-v" flag, like

[local:Online:R]/> stop -v

then you see which computer is contacted when.

- Then put some debugging code into your front-end end_of_run() routine at the 
beginning and the end of that routine, so you see when it's executed and how long 
this takes. If you do lots of things in your EOR routine, this could maybe cause a 
timeout.

- Then make sure that cm_yield() in mfe.c is called periodically by putting some 
debugging code there. This function checks for any network message, such as the 
stop command from odbedit. If you trigger event readout has an endless loop for 
example, cm_yield() will never be called and any transition will timeout.

- Make sure that not 100% CPU is used on your frontend. Some OSes have problems 
handling incoming network connections if the CPU is completely used of if 
input/output operations are too heavy.

- Stefan

Dear All,

I'm using SL5 and MIDAS rev 4528. Occasionally, when I stop a run in odbedit, 
a timeout would occur: 
[midas.c:9496:rpc_client_call,ERROR] rpc timeout after 121 sec, routine 
= "rc_transition", host = "computerB", connection closed
Error: Unknown error 504 from client 'Frontend' on host computerB

This error seems to be random without any reason or pattern. After this error 
occurs, I cannot start or stop any run. Sometime restarting MIDAS can bring 
the system working again, but sometime not.

Another transition timeout occurs after I change any ODB value using the web 
interface:
[midas.c:8291:rpc_client_connect,ERROR] timeout on receive remote computer 
info: 
[midas.c:3642:cm_transition,ERROR] cannot connect to client "Frontend" on host 
computerB, port 36255, status 503
Error: Cannot connect to client 'Frontend'

This error is reproducible: start run -> change ODB value within webpage -> 
stop run -> timeout!

Any idea?

Thanks,
Jimmy

drivers/camac/camaclx.c:760:INLINE void cam_op()
drivers/camac/camacnul.c:200:INLINE void cam_op()
drivers/camac/camacrpc.c:563:void cam_op()
drivers/camac/cc7700pci.c:744:INLINE void cam_op()
drivers/camac/ces2117.c:227:void cam_op()
drivers/camac/ces8210.c:553:void cam_op(void)
drivers/camac/ces8210.c:576:    cam_op();
drivers/camac/ces8210.c:625:    cam_op();
drivers/camac/dsp004.c:692:void cam_op()
drivers/camac/hyt1331.c:1125:INLINE void cam_op()
drivers/camac/jorway73a.c:563:INLINE void cam_op()
drivers/camac/kcs2926.c:618:INLINE void cam_op()
drivers/camac/kcs2927.c:677:INLINE void cam_op()
drivers/camac/wecc32.c:554:INLINE void cam_op()

cc -g -O3 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB   -D_LARGEFILE64_SOURCE -DHAVE_MYSQL -I/usr/include/mysql -DHAVE_ODBC -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-unused-function -o linux/bin/mcnaf utils/mcnaf.c drivers/camac/camacrpc.c linux/lib/libmidas.a -lutil -lpthread -lodbc -lz

#ifndef _ANULLF_H_
#define _ANULLF_H_ 1

#define EXTERNAL extern

#if defined( _MSC_VER )
#define INLINE __inline
#elif defined(__GNUC__)
#define INLINE __inline__
#else
#define INLINE
#endif
/* make functions under WinNT dll exportable */
#if defined(_MSC_VER) && defined(MIDAS_DLL)
#define EXPRT __declspec(dllexport)
#else
#define EXPRT
#endif

EXTERNAL INLINE void EXPRT camop() {  };

#endif

#include "anullf.h"

void cam_op() {}

#include "anullf.h"
#include <stdio.h>

int main(int argc, char** argv)
{
  camop();
}

$ gcc -O -o ma ma_1.c ma.c

I always got a 503 server error while I tried to connect this log book the latest 
weeks. I don't know why. I hope it is not due to the network censorship because 
of the coming National Day of China. Anyway, good luck to me when I want to paste 
something here.

> If you compile each source into an object, you may encounter a link error ...

Also camac rpc did not work at all last time we tried to use it at triumf, maybe 4 month ago in the Dragon 
experiment (upgrade from older version of midas). Never got around to trace down why. YMMV.

K.O.

180:         printf("camop\n");
181:         camop();

void cam_op()
{
}

mcnaf.c:(.text+0x3b1): undefined reference to `camop'
collect2: ld returned 1 exit status

Hi,
I am writing shell scripts to create some tree structure in an ODB. When 
creating an array of strings, the default length of each string element is 32 
characters. If odbedit is used interactively to create the array of strings, 
the user is prompted to enter a different length if desired. But if the 
command odbedit is called from a shell script, I did not succeed in passing 
the argument to get a different length.
I tried:
odbedit -c "create STRING Test[8][40]"
Or:
odbedit -c "create STRING Test[8] 40"
Or:
odbedit -c "create STRING Test[8] \n 40"
etc. all produce an array of 8 strings with 32 characters each.
I haven't tried all possible syntaxes, but I suspect the length argument is 
dropped. If it has not been fixed in a later release than the one I am using, 
could this problem be looked at?
Thanks,
Denis.
  

> FYI - committed the last changes from TRIUMF DAQ systems for PIENU and T2K/ND280 FGD and TPC 
> tests:
> svn rev 4541

Also:

- add traps to event buffer code to catch event buffer (shared memory) corruption observed in PIENU
- dynamically allocate some RPC network data buffers to permit better communication between MIDAS clients built with different values of 
MAX_EVENT_SIZE (in T2K/ND280 the default 4 Mbytes is too small for some users, while other users use the default size - this change permits all 
these programs to talk to each other).

K.O.

FYI - committed the last changes from TRIUMF DAQ systems for PIENU and T2K/ND280 FGD and TPC 
tests:

- mhttpd: add <odb xxx format="%d">xxx</odb>, similar to AJAX ODBget() method
- alarm.c: if alarm stops the run, log a message (sometimes it is hard to tell "why did this run stop?!?") 
use DETACH transition (was ASYNC - does not follow requested transition sequencing, now calls 
mtransition helper). Also verified that alarm handler always runs on the main computer - for remote 
clients, alarms are processed inside the corresponding mserver process.
- midas.c: event buffer fixes:
-- mserver 100% cpu busy loop if event buffer is full
-- consolidate event buffer cleanup into one routine. do things similar to odb cleanup - check for client 
pid, etc.
-- do not kill clients that have the watchdog timeout set to zero.

svn rev 4541
K.O.