26 May 2014, Dan Melconian, Suggestion, "Edit-on-end" would be nice
|
We use the "Edit-on-start" and it's great. But sometimes, something breaks
during the run, or you didn't realize you forgot to plug in a cable, or
whatever. It'd be nice to have an "Edit-on-end" where you could prompt the user
|
10 Apr 2007, Dan Gastler, Forum, Interrupt code for VME?
|
Hello,
Is there any example code for using midas for interrupt driven data
collection over VME? I am using a Struck SIS3100 PCI/VME setup to connect to my
|
26 May 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Hello,
I'm trying to get a frontend running on an arduino yun single board computer
|
27 May 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Ok, I'm currently trying to get things running, setting up a crosscompiler toolchain for the Arduino Yun is fairly
easy, just follow the tutorial on the OpenWrt webpage.
|
28 May 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Thank you very much for your input, it finally works. I succeeded in crosscompiling the frontend and running it on the ArduinoYun. The 64 MB RAM is more
than
enough to run the mserver and a frontend and connect to a remote midas server over ethernet or wifi.
|
10 Jul 2014, Clemens Sauerzopf, Forum, Adding Interrupt handling to SIS3100 driver
|
Hello,
we are using the Struck SIS 3100 VME interface for our experiment, but the midas
|
14 Jul 2014, Clemens Sauerzopf, Forum, Adding Interrupt handling to SIS3100 driver
|
Hi Pierre-Andre,
thanks for your comments. If I understand you correctly you are advising to separate the
|
16 Jul 2014, Clemens Sauerzopf, Forum, CAEN V1742 midas driver ![midasdriver_v1742.tar.gz midasdriver_v1742.tar.gz](attachment.png)
|
Hello all,
as discussed in the thread about Interrupt triggered readout
|
06 Aug 2014, Clemens Sauerzopf, Forum, Adding Interrupt handling to SIS3100 driver ![sis3100.hh sis3100.hh](attachment.png)
|
Hello Pierre-Andre,
thank you for your help with the interrupt handling. To close this case I'll
|
08 Sep 2014, Clemens Sauerzopf, Forum, CAEN V1742 midas driver
|
Hello all,
As an addition to the driver functions I uploaded in this thread I would also have a
|
24 Oct 2014, Clemens Sauerzopf, Forum, Running a frontend on Arduino Yun
|
Hello,
I'm currently trying to create a midas bank for basic temperature reading from the Arduino Yun, but when creating a bank the frontend crashed with a segfault, |
27 Jul 2012, Cheng-Ju Lin, Info, MIDAS under Scientific Linux 6
|
Hi All,
I was wondering if anyone has attempted to install MIDAS under Scientific Linux 6? I am planning to install
|
16 Aug 2012, Cheng-Ju Lin, Bug Report, launching roody kills the analyzer
|
Hi All,
I've installed midas (Rev:5294) on SLC6.3 (64bit), along with recent trunk versions of rootana and roody.
|
16 Aug 2012, Cheng-Ju Lin, Bug Fix, launching roody kills the analyzer
|
OK, I've found the solution in the roody forum. The solution for 64bit machine is to replace
uint32_t p =0;
with
|
17 Aug 2012, Cheng-Ju Lin, Bug Report, launching roody kills the analyzer
|
Hi Konstantin,
Many thanks for your feedback. I was able to keep the analyzer from exiting when launching roody by making some changes in the roody code.
|
15 Mar 2023, Casey, Forum, Having trouble with MIDAS setup
|
Hi
I'm not sure if this is the right forum for this query (if it is not, I would truly appreciate it if someone could point me at the right forum). I'm having |
22 Jan 2007, Carl Metelko, Forum, Midas on a x86_64
|
Hi,
has anyone managed to get midas to work on a x86_64 processor. I followed the
instructions for the 64-bit opteron but i am getting runtime error when trying
|
26 Jan 2007, Carl Metelko, Forum, Midas on a x86_64
|
I upgraded from 1.9.5 to the latest on SVN an it works fine |
26 Jan 2007, Carl Metelko, Forum, Front end electronics broadcast data over ethernet, can midas read this in
|
Hi,
the system I'm building will have data read into the frontend nodes
via ethernet (optic). Is this possible?> |
09 May 2007, Carl Metelko, Forum, Splitting data transfer and control onto different networks
|
Hi,
I'm setting up a system with two networks with the intension of having
control info (odb, alarm) on the 192.168.0.x
|