I have written a system monitor tool for MIDAS, that has been merged in the develop branch today: sysmon

https://bitbucket.org/tmidas/midas/pull-requests/8/system-monitoring-a-new-frontend-to-log/diff

To use it, simply run the new program
sysmon
on any host that you want to monitor, no configuring required.




The program is a frontend for MIDAS, there is no need for configuration, as upon initialisation it builds a history display for you. Simply run one instance per machine you want to monitor. By default, it only logs once per 10 seconds.

The equipment name is derived from the hostname, so multiple instances can be run across multiple machines without conflict. A new history display will be created for each host.

sysmon uses the /proc pseudo-filesystem, so unfortunately only linux is supported. It does however work with multiple architectures, so x86 and ARM processors are supported.

If the build machine has NVIDIA drivers installed, there is an additional version of sysmon that gets built: sysmon-nvidia. This will log the GPU temperature and usage, as well as CPU, memory and swap. A host should only run either sysmon or sysmon-nvidia

elog:1727/1 shows the History Display generated by sysmon-nvidia. sysmon would only generate the first two displays (sysmon/localhost and sysmon/localhost-CPU)

> > Can you post your systemd unit file to this elog, others may find it useful.

Thank you very much!

Note: user name "neo" and home directory is hardwired into the unit file. Also
it runs after "network.target", this may be too early, it should run after nis and autofs
have started (and made home directories accessible). (not sure what systemd target
that is).

K.O.

> 
> [Unit]
> Description=MIDAS data acquisition system
> After=network.target
> StartLimitIntervalSec=0
> 
> [Service]
> Type=simple
> Restart=always
> RestartSec=3
> User=neo
> ExecStart=/opt/midas/bin/mhttpd -e WAGASCI --http 8081 --https 8444
> Environment="MIDASSYS=/opt/midas" "MIDAS_EXPTAB=/home/neo/Code/WAGASCI/MIDAS/online/exptab" 
"MIDAS_EXPT_NAME=WAGASCI" 
> "SVN_EDITOR=emacs -nw" "GIT_EDITOR=emacs -nw"
> PassEnvironment=MIDASSYS MIDAS_EXPTAB MIDAS_EXPT_NAME SVN_EDITOR GIT_EDITOR
> 
> [Install]
> WantedBy=multi-user.target

> Note: user name "neo" and home directory is hardwired into the unit file. Also
> it runs after "network.target", this may be too early, it should run after nis and autofs
> have started (and made home directories accessible). (not sure what systemd target
> that is).

Thank you very much for the comments!

My home directory is hardwired because it is not straightforward to add environment variables into 
systemd units. Actually, I install MIDAS through a bash shell script that automatically generates 
the unit file during installation. So, for another user who would use my script, the correct path 
in the unit file would be generated at installation time. Another option would be to create an 
environment file and then feed it to the unit file (EnvironmentFile directive) as explained here: 
https://coreos.com/os/docs/latest/using-environment-variables-in-systemd-units.html

For the autofs, thank you for the hint. I have modified the unit file accordingly.

As far as NIS is concerned, I am sorry but I don't know how it is used by MIDAS. Actually, I don't 
even have it installed on my machine. Anyway, I have modified the unit file accordingly (but I 
haven't tested with NIS installed).

The modified unit file is this:

[Unit]
Description=MIDAS data acquisition system
After=network.target rpcbind.target ypbind.target
StartLimitIntervalSec=0
RequiresMountsFor=%h

[Service]
Type=simple
Restart=always
RestartSec=3
User=neo
ExecStart=/opt/midas/bin/mhttpd -e <nameofyourexperiment> --http <yourhttpport> --https 
<yourhttpsport>
Environment="MIDASSYS=/opt/midas" "MIDAS_EXPTAB=<path/to/your/exptab>" "MIDAS_EXPT_NAME=
<nameofyourexperiment>" "SVN_EDITOR=emacs -nw" "GIT_EDITOR=emacs -nw"
PassEnvironment=MIDASSYS MIDAS_EXPTAB MIDAS_EXPT_NAME SVN_EDITOR GIT_EDITOR

[Install]
WantedBy=multi-user.target

> As far as NIS is concerned, I am sorry but I don't know how it is used by MIDAS.

NIS is traditionally used together with autofs to form clusters of UNIX/Linux machines. NIS is a database
of user names, passwords, home directories, NFS (autofs) mount points and NFS exports. autofs would
read all it's configuration from the NIS database.

So the correct boot sequence in most cases would be like this:
hardware init -> network init -> nis -> autofs -> users can login -> start midas (mhttpd) from cron @reboot or similar.

(In organizations that have a dedicated staff of IT sysadmins, you would see LDAP instead of NIS).

K.O.

test
test
test

> test
> test
> test

another test

K.O.

> > test
> > test
> > test
> 
> another test
> 
> K.O.

I got the two email notifications, if you have tried that...

test, no email. K.O.

> test, no email. K.O.

test reply, no email. K.O.

> > test, no email. K.O.
> 
> test reply, no email. K.O.

test attachment, no email. K.O.

> > > test, no email. K.O.
> > 
> > test reply, no email. K.O.
> 
> test attachment, no email. K.O.

test email. K.O.

Dear MIDAS developers,

I'm trying to understand handling of the history (slow control) variables in MIDAS,
and it seems that the behavior I'm observing is somewhat counterintuitive. 
Most likely, I just do not understand the implemented logic.

As it it rather difficult to report on the behavior of the interactive program,
I'll describe what I'm doing and illustrate the report with the series of attached 
screenshots showing the history plots and the status of the run control at different 
consecutive points in time.

Starting with the landscape:

- I'm running MIDAS, git commit=30a03c4c (the latest, as of today).

- I have built the midas/examples/slowcont frontend with the following modifications.
  (the diffs are enclosed below):
  
  1) the frequency of the history updates is increased from 60sec/10sec to 6sec/1sec
     and, in hope to have updates continuos, I replaced (RO_RUNNING | RO_TRANSITIONS)
     with RO_ALWAYS.

  2) for convenience of debugging, midas/drivers/nulldrv.cxx is replaced with its clone,
     which instead of returning zeroes in each channel, generates a sine curve:

                  V(t) = 100*sin(t/60)+10*channel

- an active channel in /Logger/History is chosen to be FILE

- /History/LoggerHistoryChannel is also set to FILE 

- I'm running mlogger and modified, as described, 'scfe' frontend from midas/examples/slowcont

- the attached history plots include three (0,4 and 7) HV:MEASURED channels


Now, the observations:

1) the history plots are updated only when a new run starts, no matter how hard
   I'm trying to update them by clicking on various buttons.

   The attached screenshots show the timing sequence of the run control states
   (with the times printed) and the corresponding history plots. 

   The "measured voltages" change only when the next run starts - the voltage graphs 
   break only at the times corresponding to the vertical green lines.

2) No matter for how long I wait within the run, the history updates are not happening.

3) if the time difference between the two run starts gets too large,
   the plotted time dependence starts getting discontinuities

4) finally, if I switch the logging channel from FILE to MIDAS (activate the MIDAS
   channel in /Logger/History and set /History/LoggerHistoryChannel to MIDAS),
   the updates of the history plots simply stop.

MIDAS feels as a great DAQ framework, so I would appreciate any suggestion on 
what I could be doing wrong. I'd also be happy to give a demo in real time 
(via ZOOM/SKYPE etc).

-- much appreciate your time, thanks, regards, Pasha
    
------------------------------------------------------------------------------
diff --git a/examples/slowcont/scfe.cxx b/examples/slowcont/scfe.cxx
index 11f09042..c98d37e8 100644
--- a/examples/slowcont/scfe.cxx
+++ b/examples/slowcont/scfe.cxx
@@ -24,9 +24,10 @@
 #include "mfe.h"
 #include "class/hv.h"
 #include "class/multi.h"
-#include "device/nulldev.h"
 #include "bus/null.h"
 
+#include "nulldev.h"
+
 /*-- Globals -------------------------------------------------------*/
 
 /* The frontend name (client name) as seen by other MIDAS clients   */
@@ -74,11 +75,11 @@ EQUIPMENT equipment[] = {
      0,                         /* event source */
      "FIXED",                   /* format */
      TRUE,                      /* enabled */
-     RO_RUNNING | RO_TRANSITIONS,        /* read when running and on transitions */
-     60000,                     /* read every 60 sec */
+     RO_ALWAYS,        /* read when running and on transitions */
+     6000,                     /* read every 6 sec */
      0,                         /* stop run after this event limit */
      0,                         /* number of sub events */
-     10000,                     /* log history at most every ten seconds */
+     1000,                     /* log history at most every one second */
      "", "", ""} ,
     cd_hv_read,                 /* readout routine */
     cd_hv,                      /* class driver main routine */
@@ -93,8 +94,8 @@ EQUIPMENT equipment[] = {
      0,                         /* event source */
      "FIXED",                   /* format */
      TRUE,                      /* enabled */
-     RO_RUNNING | RO_TRANSITIONS,        /* read when running and on transitions */
-     60000,                     /* read every 60 sec */
+     RO_ALWAYS,        /* read when running and on transitions */
+     6000,                     /* read every 6 sec */
      0,                         /* stop run after this event limit */
      0,                         /* number of sub events */
      1,                         /* log history every event as often as it changes (max 1 Hz) */
------------------------------------------------------------------------------
[test_001]$ diff ../midas/examples/slowcont/nulldev.cxx ../midas/drivers/device/nulldev.cxx 
13d12
< #include <math.h>
150,154c149,150
<    if (channel < info->num_channels) {
<      // *pvalue = info->array[channel];
<      time_t t = time(NULL);;
<      *pvalue = 100*sin(M_PI*t/60)+10*channel;
<    }
---
>    if (channel < info->num_channels)
>       *pvalue = info->array[channel];
------------------------------------------------------------------------------

First of all it's important to understand that the slow control system has nothing to do
with events. So if you look at event statistics, these are the events with the slow control
data sent to the midas data file, not the history database. So the logging period (the one you 
decreased from 60s to 10s to 6s) only affect the generation of events. 

What is important in your case is the number of events sent to the ODB. You see these in the
screen output of the slow control frontend (see attachment). This number show increase every
second.

I tried your modification (change nulldev with a sine function), and left the sc_fe.cxx
otherwise untouched. I then started with a fresh ODB ("rm /"). Started logger, mhttpd, sc_fe
and started a run. In the attachments is what I see. So I don't understand what your problem
is.

Hi Sfefan, thanks a lot for taking time to reproduce the issue! 

Here comes the resolution, and of course, it was something deeply trivial :  

the definition of the HV equipment in midas/examples/slowcont/scfe.cxx has 
the history logging time in seconds, however the comment suggests milliseconds (see below), 
and for a few days I believed to the comment (:smile:)

Easy to fix. 

Also, I think that having a sine wave displayed by midas/examples/slowcont/scfe.cxx 
would make this example even more helpful.

-- thanks again, regards, Pasha

--------------------------------------------------------------------------------------------------------
EQUIPMENT equipment[] = {

   {"HV",                       /* equipment name */
    {3, 0,                      /* event ID, trigger mask */
     "SYSTEM",                  /* event buffer */
     EQ_SLOW,                   /* equipment type */
     0,                         /* event source */
     "FIXED",                   /* format */
     TRUE,                      /* enabled */
     RO_RUNNING | RO_TRANSITIONS,        /* read when running and on transitions */
     60000,                     /* read every 60 sec */
     0,                         /* stop run after this event limit */
     0,                         /* number of sub events */
     10000,                     /* log history at most every ten seconds */ // <------------ this is 10^4 seconds, not 10 seconds
     "", "", ""} ,
    cd_hv_read,                 /* readout routine */
    cd_hv,                      /* class driver main routine */
    hv_driver,                  /* device driver list */
    NULL,                       /* init string */
    },


https://bitbucket.org/tmidas/midas/src/7f0147eb7bc7395f262b3ae90dd0d2af0625af39/examples/slowcont/scfe.cxx#lines-81

> Also, I think that having a sine wave displayed by midas/examples/slowcont/scfe.cxx 
> would make this example even more helpful.

Indeed. I reworked the example to have a out-of-the-box sine wave plotter, including the
automatic creation of a history panel. Thanks for the hint.

Best,
Stefan

MIDAS history is very simple:

from your frontend, your write your history data to ODB /eq/xxx/variables (see below)
mlogger has a hotlink to all /eq/*/variables and it will "see" the new data, write it to history file (see below)
you should see the history file grow using "ls"

history web page in your browser sends a "give me more data" JSON-RPC request to mhttpd
mhttpd looks at the history file, if there is new data (file got bigger) it send it to the web page
web page shows the new data.

where things usually go wrong:

- mlogger only looks for new history variables on startup and on begin-of-run. if you add new stuff in your frontend, you 
will not see it until you restart mlogger or start a new run.
- mlogger only looks at history data if corresponding "/eq/xxx/common/log history" is non-zero. for best effect, set it to 
"1". (or "0" to turn history off).
- history file is not growing, likely mlogger does not "see" your new data
- timestamps of stuff in /eq/xxx/variables are not getting updated, likely frontend is not writing them, and there is no 
new data for mlogger to "see" and write to file.

Frontend has several ways of writing to /eq/xxx/variables:

- write to ODB directly using ODB API db_set_data(), mvodb->Wx(), etc. this is the most foolproof method. use in 
conjunction with a printf() statement to make sure you actually do write to ODB. Sometimes your frontend event loop fails 
to run, a bug/failure that has nothing to do with midas history.

- generate a midas event and set the per-equipment "write event to ODB" flag (RO_ODB for mfe.c frontends), the mfe/tmfe 
framework will write event data to ODB, each data bank will be written to /eq/xxx/variables/BANKNAME, data type is taken 
from the event data bank definition.

This second method sometimes malfunctions, typical problems are missing RO_ODB in the equipment table, equipment table in 
ODB overwriting the value in source code (this is confusing in mfe.c frontends).

Least likely failure is "/eq/xxx/common/log history" set to bogus value. Normal values are 0=history disabled, 1=history 
enabled, other values are only needed if you do not want mlogger to record history as often as you generate it, i.e. you 
update /eq/xxx/variables every 1/sec, but you want mlogger to only record it 1/minute.

I hope this helps.

P.S. I notice your equipment tables do not have RO_ODB, so if you use the 2nd method, write history via event data banks, 
it will not work.


K.O.


> Dear MIDAS developers,
> 
> I'm trying to understand handling of the history (slow control) variables in MIDAS,
> and it seems that the behavior I'm observing is somewhat counterintuitive. 
> Most likely, I just do not understand the implemented logic.
> 
> As it it rather difficult to report on the behavior of the interactive program,
> I'll describe what I'm doing and illustrate the report with the series of attached 
> screenshots showing the history plots and the status of the run control at different 
> consecutive points in time.
> 
> Starting with the landscape:
> 
> - I'm running MIDAS, git commit=30a03c4c (the latest, as of today).
> 
> - I have built the midas/examples/slowcont frontend with the following modifications.
>   (the diffs are enclosed below):
>   
>   1) the frequency of the history updates is increased from 60sec/10sec to 6sec/1sec
>      and, in hope to have updates continuos, I replaced (RO_RUNNING | RO_TRANSITIONS)
>      with RO_ALWAYS.
> 
>   2) for convenience of debugging, midas/drivers/nulldrv.cxx is replaced with its clone,
>      which instead of returning zeroes in each channel, generates a sine curve:
> 
>                   V(t) = 100*sin(t/60)+10*channel
> 
> - an active channel in /Logger/History is chosen to be FILE
> 
> - /History/LoggerHistoryChannel is also set to FILE 
> 
> - I'm running mlogger and modified, as described, 'scfe' frontend from midas/examples/slowcont
> 
> - the attached history plots include three (0,4 and 7) HV:MEASURED channels
> 
> 
> Now, the observations:
> 
> 1) the history plots are updated only when a new run starts, no matter how hard
>    I'm trying to update them by clicking on various buttons.
> 
>    The attached screenshots show the timing sequence of the run control states
>    (with the times printed) and the corresponding history plots. 
> 
>    The "measured voltages" change only when the next run starts - the voltage graphs 
>    break only at the times corresponding to the vertical green lines.
> 
> 2) No matter for how long I wait within the run, the history updates are not happening.
> 
> 3) if the time difference between the two run starts gets too large,
>    the plotted time dependence starts getting discontinuities
> 
> 4) finally, if I switch the logging channel from FILE to MIDAS (activate the MIDAS
>    channel in /Logger/History and set /History/LoggerHistoryChannel to MIDAS),
>    the updates of the history plots simply stop.
> 
> MIDAS feels as a great DAQ framework, so I would appreciate any suggestion on 
> what I could be doing wrong. I'd also be happy to give a demo in real time 
> (via ZOOM/SKYPE etc).
> 
> -- much appreciate your time, thanks, regards, Pasha
>     
> ------------------------------------------------------------------------------
> diff --git a/examples/slowcont/scfe.cxx b/examples/slowcont/scfe.cxx
> index 11f09042..c98d37e8 100644
> --- a/examples/slowcont/scfe.cxx
> +++ b/examples/slowcont/scfe.cxx
> @@ -24,9 +24,10 @@
>  #include "mfe.h"
>  #include "class/hv.h"
>  #include "class/multi.h"
> -#include "device/nulldev.h"
>  #include "bus/null.h"
>  
> +#include "nulldev.h"
> +
>  /*-- Globals -------------------------------------------------------*/
>  
>  /* The frontend name (client name) as seen by other MIDAS clients   */
> @@ -74,11 +75,11 @@ EQUIPMENT equipment[] = {
>       0,                         /* event source */
>       "FIXED",                   /* format */
>       TRUE,                      /* enabled */
> -     RO_RUNNING | RO_TRANSITIONS,        /* read when running and on transitions */
> -     60000,                     /* read every 60 sec */
> +     RO_ALWAYS,        /* read when running and on transitions */
> +     6000,                     /* read every 6 sec */
>       0,                         /* stop run after this event limit */
>       0,                         /* number of sub events */
> -     10000,                     /* log history at most every ten seconds */
> +     1000,                     /* log history at most every one second */
>       "", "", ""} ,
>      cd_hv_read,                 /* readout routine */
>      cd_hv,                      /* class driver main routine */
> @@ -93,8 +94,8 @@ EQUIPMENT equipment[] = {
>       0,                         /* event source */
>       "FIXED",                   /* format */
>       TRUE,                      /* enabled */
> -     RO_RUNNING | RO_TRANSITIONS,        /* read when running and on transitions */
> -     60000,                     /* read every 60 sec */
> +     RO_ALWAYS,        /* read when running and on transitions */
> +     6000,                     /* read every 6 sec */
>       0,                         /* stop run after this event limit */
>       0,                         /* number of sub events */
>       1,                         /* log history every event as often as it changes (max 1 Hz) */
> ------------------------------------------------------------------------------
> [test_001]$ diff ../midas/examples/slowcont/nulldev.cxx ../midas/drivers/device/nulldev.cxx 
> 13d12
> < #include <math.h>
> 150,154c149,150
> <    if (channel < info->num_channels) {
> <      // *pvalue = info->array[channel];
> <      time_t t = time(NULL);;
> <      *pvalue = 100*sin(M_PI*t/60)+10*channel;
> <    }
> ---
> >    if (channel < info->num_channels)
> >       *pvalue = info->array[channel];
> ------------------------------------------------------------------------------

Hello,

I have a few questions about time information:
1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
the attached file)
2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
example when I start a new run, value of "Start time" key is automatically changed 
to "Fri Aug 21 12:38:36 2020" without time zone. 

Thank you.

> 1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
> the attached file)

You have in the ODB "/Runinfo/Start time binary" which is measured in seconds since 
1970. By subtracting this from the current time, you get the running time.

> 2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
> example when I start a new run, value of "Start time" key is automatically changed 
> to "Fri Aug 21 12:38:36 2020" without time zone. 

"Start time binary" and "Stop time binary" are in seconds since the 1970 in UTC, so no 
time zone involved there. The ASCII versions of the start/stop time are derived from 
the binary time using the server's local time zone. If you want to display them in a 
different time zone, you have to create a custom page and convert it to another time 
zone using JavaScript like

var d = new Date(start_time_binary);

Stefan

Thank you, Stefan

Ruslan 



> > 1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
> > the attached file)
> 
> You have in the ODB "/Runinfo/Start time binary" which is measured in seconds since 
> 1970. By subtracting this from the current time, you get the running time.
> 
> > 2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
> > example when I start a new run, value of "Start time" key is automatically changed 
> > to "Fri Aug 21 12:38:36 2020" without time zone. 
> 
> "Start time binary" and "Stop time binary" are in seconds since the 1970 in UTC, so no 
> time zone involved there. The ASCII versions of the start/stop time are derived from 
> the binary time using the server's local time zone. If you want to display them in a 
> different time zone, you have to create a custom page and convert it to another time 
> zone using JavaScript like
> 
> var d = new Date(start_time_binary);
> 
> Stefan

 Thank you, Stefan

 >>>var d = new Date(start_time_binary);
 I need time zone because new Date() gives time related to time zone of my PC. 
 
 Ruslan 
> 
> 
> 
> > > 1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
> > > the attached file)
> > 
> > You have in the ODB "/Runinfo/Start time binary" which is measured in seconds since 
> > 1970. By subtracting this from the current time, you get the running time.
> > 
> > > 2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
> > > example when I start a new run, value of "Start time" key is automatically changed 
> > > to "Fri Aug 21 12:38:36 2020" without time zone. 
> > 
> > "Start time binary" and "Stop time binary" are in seconds since the 1970 in UTC, so no 
> > time zone involved there. The ASCII versions of the start/stop time are derived from 
> > the binary time using the server's local time zone. If you want to display them in a 
> > different time zone, you have to create a custom page and convert it to another time 
> > zone using JavaScript like
> > 
> > var d = new Date(start_time_binary);
> > 
> > Stefan