Hello all,

As an addition to the driver functions I uploaded in this thread I would also have a
C++ class that handles everything for the V1742 modules and can be directly used
integrated into a C++ frontend. 

I would like to ask if you have policy for user supplied code like this? It's not a low
level driver but a frontend module that reads and controls the module, creates odb
hotlinks and handles the bank creating and storing of the data.

Best regards,
Clemens

EDIT: the question is, do you like to have  codes like this collected somewhere for
example this forum or would you prefer if I would post a link to some online repository =

I am having some trouble creating a frontend that interacts with some libraries that use C++11. 

The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This 
causes an error in the equipment description in the frontend code.

The error I get is:

frontend.cpp:149: error: narrowing conversion of ‘-0x00000000000000001’ from ‘int’ to ‘WORD’ inside { 
}

This corresponds to the following in the MIDAS frontend code.

EQUIPMENT equipment[] = { 
  {
   "MWPC",                           /* equipment name */
   {1, TRIGGER_ALL,                  /* event ID, trigger mask */
     "BUF2",                        /* event buffer */
     EQ_POLLED | EQ_EB,              /* equipment type */
     LAM_SOURCE(0, 0xFFFFFF),        /* event source crate 0, all stations */
     "MIDAS",                        /* format */
     TRUE,                           /* enabled */
     RO_RUNNING,                     /* read only when running */
     1,                              /* poll for 1ms */
     0,                              /* stop run after this event limit */
     0,                              /* number of sub events */
     0,                              /* don't log history */
     "", "", "",},
    read_trigger_event,              /* readout routine */
  },

   {""}
};  <- this is line 149
#ifdef __cplusplus
}
#endif

Do you know a way to make this compatible with C++11?

Thanks!

> I am having some trouble creating a frontend that interacts with some libraries that use C++11. 
> 
> The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This 
> causes an error in the equipment description in the frontend code.
> 
> The error I get is:
> 
> frontend.cpp:149: error: narrowing conversion of ‘-0x00000000000000001’ from ‘int’ to ‘WORD’ inside { 
> }
> 
> This corresponds to the following in the MIDAS frontend code.
> 
> EQUIPMENT equipment[] = { 
>   {
>    "MWPC",                           /* equipment name */
>    {1, TRIGGER_ALL,                  /* event ID, trigger mask */
>      "BUF2",                        /* event buffer */
>      EQ_POLLED | EQ_EB,              /* equipment type */
>      LAM_SOURCE(0, 0xFFFFFF),        /* event source crate 0, all stations */
>      "MIDAS",                        /* format */
>      TRUE,                           /* enabled */
>      RO_RUNNING,                     /* read only when running */
>      1,                              /* poll for 1ms */
>      0,                              /* stop run after this event limit */
>      0,                              /* number of sub events */
>      0,                              /* don't log history */
>      "", "", "",},
>     read_trigger_event,              /* readout routine */
>   },
> 
>    {""}
> };  <- this is line 149
> #ifdef __cplusplus
> }
> #endif
> 
> Do you know a way to make this compatible with C++11?
> 
> Thanks!

Is this maybe related to the LAM_SOURCE(0, 0xFFFFFFFF) where 0xFFFFFFFF is -1. I guess you are not using CAMAC, so just replace the 
LAM_SOURCE(...) with zero and try again.

/Stefan

> > I am having some trouble creating a frontend that interacts with some libraries that use C++11. 
> > 
> > The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This 
> > causes an error in the equipment description in the frontend code.
> > 
> > The error I get is:
> > 
> > frontend.cpp:149: error: narrowing conversion of ‘-0x00000000000000001’ from ‘int’ to ‘WORD’ inside { 
> > }
> > 
> > This corresponds to the following in the MIDAS frontend code.
> > 
> > EQUIPMENT equipment[] = { 
> >   {
> >    "MWPC",                           /* equipment name */
> >    {1, TRIGGER_ALL,                  /* event ID, trigger mask */
> >      "BUF2",                        /* event buffer */
> >      EQ_POLLED | EQ_EB,              /* equipment type */
> >      LAM_SOURCE(0, 0xFFFFFF),        /* event source crate 0, all stations */
> >      "MIDAS",                        /* format */
> >      TRUE,                           /* enabled */
> >      RO_RUNNING,                     /* read only when running */
> >      1,                              /* poll for 1ms */
> >      0,                              /* stop run after this event limit */
> >      0,                              /* number of sub events */
> >      0,                              /* don't log history */
> >      "", "", "",},
> >     read_trigger_event,              /* readout routine */
> >   },
> > 
> >    {""}
> > };  <- this is line 149
> > #ifdef __cplusplus
> > }
> > #endif
> > 
> > Do you know a way to make this compatible with C++11?
> > 
> > Thanks!
> 
> Is this maybe related to the LAM_SOURCE(0, 0xFFFFFFFF) where 0xFFFFFFFF is -1. I guess you are not using CAMAC, so just replace the 
> LAM_SOURCE(...) with zero and try again.
> 
> /Stefan

Thanks for the suggestion. It looks like it is instead the TRIGGER_ALL that is causing the problem. TRIGGER_ALL is defined as -1 in midas.h. If I replace TRIGGER_ALL with 0 in the 
frontend, it compiles, but if I use -1, I get the same error. I do not think that I want my trigger mask set to 0. Do you have a suggestion of how to get around this?

To answer the other questions, we are running on SLF6. I am building a frontend for a MWPC to read data from CAEN TDCs.

> Thanks for the suggestion. It looks like it is instead the TRIGGER_ALL that is causing the problem. TRIGGER_ALL is defined as -1 in midas.h. If I replace TRIGGER_ALL with 0 in the 
> frontend, it compiles, but if I use -1, I get the same error. I do not think that I want my trigger mask set to 0. Do you have a suggestion of how to get around this?

Ok, then it's clear. The trigger mask inside the EQUIPMENT_INFO is defined as 16-bit unsigned int (WORD). So the -1 gets expanded into a 64-bit signed int, then the compiler complains about truncating this to 16-bit. 

Just try instead TRIGGER_ALL to write

(WORD)(-1)

or even

0xFFFF

that should do the job. Basically you want all 16 bits to be "1" if yo do not use this feature.

Best regards,
Stefan

diff Makefile Makefile.modify
-------------------------------------
404,405c404,405
< $(BIN_DIR)/mcnaf: $(UTL_DIR)/mcnaf.c $(DRV_DIR)/bus/camacrpc.c
<       $(CC) $(CFLAGS) $(OSFLAGS) -o $@ $(UTL_DIR)/mcnaf.c $(DRV_DIR)/bus/camacrpc.c $(LIB) $(LIBS)
---
> $(BIN_DIR)/mcnaf: $(UTL_DIR)/mcnaf.c $(DRV_DIR)/camac/camacrpc.c
>       $(CC) $(CFLAGS) $(OSFLAGS) -o $@ $(UTL_DIR)/mcnaf.c $(DRV_DIR)/camac/camacrpc.c $(LIB) $(LIBS)

To build a frontend task, the user code and system code are compiled and linked 
together with the required libraries, by running a Makefile (e.g. 
../midas/examples/experiment/Makefile in the MIDAS package).

I tried building the CAMAC example frontend and I get this error:

g++: error: /home/rcmp/packages/midas/drivers/camac/ces8210.c: No such file or 
directory
g++: error: /home/rcmp/packages/midas/linux/lib/libmidas.a: No such file or 
directory
make: *** [camac_init.exe] Error 1

Obviously, I'm running the "make all" command from the camac directory. Why 
would I get this "no such file" error? Do I need to download the MIDAS packages 
inside my experiment directory?

Thanks for helping me out.

Isaac

Platform: Debian Linux testing
Compiler: gcc 4.3.4 (Debian 4.3.4-2)
Arch: x86
Description:
  The "g++" is whining while compiling history_midas.cxx. Please see the attached log file.
This can be fixed by add "#include <cstdlib>" to the C++ source. You know, different versions
of g++ don't act the same way. I think, maybe in version 4.2 or before, g++ can automatically
include the C header "stdlib.h" (which in C++ should be <cstdlib> because of some confusion
between C and C++), but not in version 4.3 or later. I tested g++-4.4, the problem still exists.
And g++-4.2 gives no error.

>  The "g++" is whining while compiling history_midas.cxx. Please see the attached log file.

Fixed. svn 4594. K.O.

Hi everyone,

I have been building an experiment using the v1718 CAEN interface to talk to my modules and I am using the CAENVMElib Linux Library (2.50). I've managed to deal with data type issues by including additional libraries to my driver code but there is one type error that persists:


In file included from /usr/include/CAENVMElib.h:27:0,
             	from include/v1718.h:25,
             	from v1718.c:26:
/usr/include/CAENVMEtypes.h:323:9: error: unknown type name ‘VARIANT_BOOL’
     	CAEN_BOOL cvDS0;  	/* Data Strobe 0 signal                     	*/


The header file used to defined the CAEN types (CAENVMEtypes.h) defines 'CAEN_BOOL' like this:


#ifdef LINUX
#define CAEN_BYTE   	unsigned char
#define CAEN_BOOL   	int
#else
#define CAEN_BYTE   	byte
#define CAEN_BOOL   	VARIANT_BOOL
#endif


Has anyone ever ran into that problem when setting up an experiment using the CAEN standard?

Thanks for your help.

Isaac

Hi,

You're building under Linux like. You want to define the LINUX and skip the VARIANT_BOOL all together.
PAA

> Hi everyone,
> 
> I have been building an experiment using the v1718 CAEN interface to talk to my modules and I am using the CAENVMElib Linux Library (2.50). I've managed to deal with data type issues by including additional libraries to my driver code but there is one type error 
that persists:
> 
> 
> In file included from /usr/include/CAENVMElib.h:27:0,
>              	from include/v1718.h:25,
>              	from v1718.c:26:
> /usr/include/CAENVMEtypes.h:323:9: error: unknown type name ‘VARIANT_BOOL’
>      	CAEN_BOOL cvDS0;  	/* Data Strobe 0 signal                     	*/
> 
> 
> The header file used to defined the CAEN types (CAENVMEtypes.h) defines 'CAEN_BOOL' like this:
> 
> 
> #ifdef LINUX
> #define CAEN_BYTE   	unsigned char
> #define CAEN_BOOL   	int
> #else
> #define CAEN_BYTE   	byte
> #define CAEN_BOOL   	VARIANT_BOOL
> #endif
> 
> 
> Has anyone ever ran into that problem when setting up an experiment using the CAEN standard?
> 
> Thanks for your help.
> 
> Isaac

> Hi,
> 
> You're building under Linux like. You want to define the LINUX and skip the VARIANT_BOOL all together.
> PAA
> 
> > Hi everyone,
> > 
> > I have been building an experiment using the v1718 CAEN interface to talk to my modules and I am using the CAENVMElib Linux Library (2.50). I've managed to deal with data type issues by including additional libraries to my driver code but there is one type error 
> that persists:
> > 
> > 
> > In file included from /usr/include/CAENVMElib.h:27:0,
> >              	from include/v1718.h:25,
> >              	from v1718.c:26:
> > /usr/include/CAENVMEtypes.h:323:9: error: unknown type name ‘VARIANT_BOOL’
> >      	CAEN_BOOL cvDS0;  	/* Data Strobe 0 signal                     	*/
> > 
> > 
> > The header file used to defined the CAEN types (CAENVMEtypes.h) defines 'CAEN_BOOL' like this:
> > 
> > 
> > #ifdef LINUX
> > #define CAEN_BYTE   	unsigned char
> > #define CAEN_BOOL   	int
> > #else
> > #define CAEN_BYTE   	byte
> > #define CAEN_BOOL   	VARIANT_BOOL
> > #endif
> > 
> > 
> > Has anyone ever ran into that problem when setting up an experiment using the CAEN standard?
> > 
> > Thanks for your help.
> > 
> > Isaac

Yes, you are right. That fixed it and my frontend is compiling.

Thanks Pierre-Andre.

Isaac


> Hi,
> 
> You're building under Linux like. You want to define the LINUX and skip the VARIANT_BOOL all together.
> PAA
> 
> > Hi everyone,
> > 
> > I have been building an experiment using the v1718 CAEN interface to talk to my modules and I am using the CAENVMElib Linux Library (2.50). I've managed to deal with data type issues by including additional libraries to my driver code but there is one type error 
> that persists:
> > 
> > 
> > In file included from /usr/include/CAENVMElib.h:27:0,
> >              	from include/v1718.h:25,
> >              	from v1718.c:26:
> > /usr/include/CAENVMEtypes.h:323:9: error: unknown type name ‘VARIANT_BOOL’
> >      	CAEN_BOOL cvDS0;  	/* Data Strobe 0 signal                     	*/
> > 
> > 
> > The header file used to defined the CAEN types (CAENVMEtypes.h) defines 'CAEN_BOOL' like this:
> > 
> > 
> > #ifdef LINUX
> > #define CAEN_BYTE   	unsigned char
> > #define CAEN_BOOL   	int
> > #else
> > #define CAEN_BYTE   	byte
> > #define CAEN_BOOL   	VARIANT_BOOL
> > #endif
> > 
> > 
> > Has anyone ever ran into that problem when setting up an experiment using the CAEN standard?
> > 
> > Thanks for your help.
> > 
> > Isaac

> 
> The header file used to defined the CAEN types (CAENVMEtypes.h) defines 'CAEN_BOOL' like this:
> 
> 
> #ifdef LINUX
> #define CAEN_BYTE   	unsigned char
> #define CAEN_BOOL   	int
> #else
> #define CAEN_BYTE   	byte
> #define CAEN_BOOL   	VARIANT_BOOL
> #endif
> 

Complain to CAEN.

The year is 2020 and they should use standard C/C++ data types from stdint.h (uint32_t, etc).

K.O.

I write some configure file to build MIDAS using CMake. The usage is simple:
1. Unzip the attachment, copy "CMakeLists.txt" and directory "cmake" into the
midas source tree.
   $ cp -rp CMakeLists.txt cmake/  <PATH-TO-MIDAS>/
2. make a separate directory, such as "build". It's a good habit to build a
project without polluting the source tree. :-)
   $ mkdir build
3. Executing cmake
   $ cd build && cmake <PATH-TO-MIDAS>
4. Make
   $ make

Or, you can generate Xcode project files:
  $ cmake -G Xcode <PATH-TO-MIDAS>
or using visual studio
  $ cmake -G "Visual Studio" <PATH-TO-MIDAS>
(I havn't Visual Studio and windows, so the above command is not tested.)
or using other IDEs, such as KDevelop3, Eclipse, etc, just type:
  $ cmake -G "KDevelop3" <PATH-TO-MIDAS>
or
  $ cmake -G "Eclipse CDT4" <PATH-TO-MIDAS>


I test the configure file with GNU make and CMake 2.6.4 on Debian Lenny. I
havn't add installation commands now. Maybe later. If anyone interests in it, I
may check it again. Anyway, I'm using it.

src/mlogger.cxx: In function ‘INT midas_flush_buffer(LOG_CHN*)’:
src/mlogger.cxx:1011:54: error: invalid conversion from ‘void*’ to ‘gzFile’ [-fpermissive]
In file included from src/mlogger.cxx:33:0:
/usr/include/zlib.h:1318:21: error:   initializing argument 1 of ‘int gzwrite(gzFile, voidpc, unsigned int)’ [-fpermissive]
src/mlogger.cxx: In function ‘INT midas_log_open(LOG_CHN*, INT)’:
src/mlogger.cxx:1200:79: error: invalid conversion from ‘void*’ to ‘gzFile’ [-fpermissive]
In file included from src/mlogger.cxx:33:0:

Stefan's fix is incomplete - the "gzFile" cast is needed for all calls to zlib, not just those that some version 
of GCC happens to complain about. Fixed.
svn rev 5286.

BTW, I read the midas elog via email and if you post html or elcode messages, I receive complete 
gibberish. For prompt service, please select message type "plain". (yes, you cannot use fancy colours and 
blinking text, but better than me not reading your stuff at all).

BTW2, for easier reading, please include error messages as plain text in your message. As opposed to 
compressed attachements.

K.O.