> Our default configuration of apache httpd logs every request. MIDAS custom web pages can easily make a huge number of RPC calls creating a 
> huge log file and filling system disk to 100% capacity

perhaps use existing logrotate, add limit on file size (size) and limit of 2 old log files (rotate).

/etc/logrotate.d/httpd

/var/log/httpd/*log { 
    size 100M 
    rotate 2 
    missingok 
    notifempty 
    sharedscripts 
    delaycompress 
    postrotate 
        /bin/systemctl reload httpd.service > /dev/null 2>/dev/null || true 
    endscript 
} 

K.O.

Our default configuration of apache httpd logs every request. MIDAS custom web pages can easily make a huge number of RPC calls creating a 
huge log file and filling system disk to 100% capacity

this example has around 100 RPC requests per second. reasonable/unreasonable? available hardware can handle it (web browser, network 
httpd, mhttpd, etc), so we should try to get this to work. perhaps filter the apache httpd logs to exclude mjsonrpc requests? of course we 
can ask the affected experiment why they make so many RPC calls, is there a bug?

[14/May/2023:03:49:01 -0700] 142.90.111.176 TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384 "POST /?mjsonrpc HTTP/1.1" 299
[14/May/2023:03:49:01 -0700] 142.90.111.176 TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384 "POST /?mjsonrpc HTTP/1.1" 299
[14/May/2023:03:49:01 -0700] 142.90.111.176 TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384 "POST /?mjsonrpc HTTP/1.1" 299
[14/May/2023:03:49:01 -0700] 142.90.111.176 TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384 "POST /?mjsonrpc HTTP/1.1" 299
[14/May/2023:03:49:01 -0700] 142.90.111.176 TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384 "POST /?mjsonrpc HTTP/1.1" 299

K.O.

> A new environment variable MIDAS_EXPNAME has been introduced [to be used together with 
MIDAS_DIR]

This is fixes an important buglet. If experiment uses MIDAS_DIR instead of exptab, at the time 
of connecting to ODB, we do not know the experiment name and use name "Default" to create ODB 
shared memory, instead of actual experiment name.

This creates an inconsistency, if some MIDAS programs in the same experiment use MIDAS_DIR while 
others use exptab (this would be unusual, but not impossible) they would connect to two 
different ODB shared memories, former using name "Default", latter using actual experiment name.

As an indication that something is not right, when stopping MIDAS programs, there is an error 
message about failure to delete shared ODB shared memory (because it was created using name 
"Default" and delete using the correct experiment name fails).

Also it can cause co-mingling between two different experiments, depending on the type of shared 
memory used by MIDAS (see $MIDAS_DIR/.SHM_TYPE.TXT):
POSIX - (usually not used) not affected (experiment name is not used)
POSIXv2 - (usually not used) affected (shm name is "$EXP_NAME_ODB")
POSIXv3 - used on MacOS - affected (shm name is "$UID_$EXP_NAME_ODB" so "$UID_Default_ODB" will 
collide)
POSIXv4 - used on Linux - not affected (shm name includes $MIDAS_DIR which is different for 
different experiments)

K.O.

A new environment variable MIDAS_EXPNAME has been introduced. This must be
used for cases where people use MIDAS_DIR, and is then equivalent for the
experiment name and directory usually used in the exptab file. This fixes
and issue with creating and deleting shared memory in midas as described in

https://bitbucket.org/tmidas/midas/issues/363/deletion-of-shared-memory-fails

The documentation has been updated at

https://daq00.triumf.ca/MidasWiki/index.php/MIDAS_environment_variables#MIDAS_EXPN
AME

/Stefan

if (script.substring(0, 1) === "[") {
   // refuse to load script if the selected a subdirectory
   return;
}

diff --git a/resources/load_script.html b/resources/load_script.html
index 41bfdccd..36caa57f 100644
--- a/resources/load_script.html
+++ b/resources/load_script.html
@@ -59,6 +59,28 @@
 </div>

 <script>
+   document.getElementById("msg_sel").onchange = function() {
+      script = this.value;
+      button = document.getElementById("load_button");
+      if (script.substring(0, 4) === "[..]") {
+         // Change button to go back
+         enable_button_by_id("load_button");
+         button.innerHTML = "Back";
+         button.onclick = up_subdir;
+      } else if (script.substring(0, 1) === "[") {
+         // Change button to load subdirectory
+         enable_button_by_id("load_button");
+         button.innerHTML = "Enter subdirectory";
+         button.onclick = load_subdir;
+      } else {
+         // Change button to load script
+         enable_button_by_id("load_button");
+         button = document.getElementById("load_button");
+         button.innerHTML = "Load script";
+         button.onclick = load_script;
+      }
+   }
+
 function set_if_changed(id, value)
 {
    var e = document.getElementById(id);

let notification = new Notification('MIDAS Message', {
    body: text,
});

<button class="mbutton" onclick="Notification.requestPermission()">Request notification permission</button>

> Thanks. It works perfect.
> Another question is:
> Is it possible to run .msl seqscript from bash cmd?
> Maybe it's easier then
> 1 odbedit -c 'set "/sequencer/load filename" filename.msl'
> 2 odbedit -c 'set "/sequencer/load new file" TRUE'
> 3 odbedit -c 'set "/sequencer/start script" TRUE'

That will work.

> What is the best way to have a button starting sequencer
> from  /script (or /alias )?

Have a look at 

https://daq00.triumf.ca/MidasWiki/index.php/Sequencer#Controlling_the_sequencer_from_custom_pages

where I put the necessary information.

Stefan

Thanks. It works perfect.
Another question is:
Is it possible to run .msl seqscript from bash cmd?
Maybe it's easier then
1 odbedit -c 'set "/sequencer/load filename" filename.msl'
2 odbedit -c 'set "/sequencer/load new file" TRUE'
3 odbedit -c 'set "/sequencer/start script" TRUE'

What is the best way to have a button starting sequencer
from  /script (or /alias )?

Alexey.

> > I tried different ways to pass parameters to bash script, but there are seems to 
> > be empty, what could be the problem?
> 
> Indeed there was a bug in the sequencer with parameter passing to scripts. I fixed it
> and committed the changes to the develop branch.
> 
> Stefan

> I tried different ways to pass parameters to bash script, but there are seems to 
> be empty, what could be the problem?

Indeed there was a bug in the sequencer with parameter passing to scripts. I fixed it
and committed the changes to the develop branch.

Stefan

Hello,

I tried different ways to pass parameters to bash script, but there are seems to 
be empty, what could be the problem?

We have seuqencer like

ODBGET "/Runinfo/runnumber", firstrun
LOOP n,10
#changing HV
TRANSITION start
WAIT seconds,300
TRANSITION stop
ENDLOOP
ODBGET "/Runinfo/runnumber", lastrun
SCRIPT /.../script.sh ,$firstrun ,$lastrun

and script.sh like
firstrun=$1
lastrun=$2

Thanks. Alexey.

>  Shall I create a pull request for the additional RPC argument or will you just fix this on the fly?



Just fix it in the fly yourself. It’s an obvious bug, so please commit to develop.



Stefan 

And now we also fixed the client segfault, odb.cxx L8992 also needs to know about the header:
if (rpc_is_remote())
      return rpc_call(RPC_DB_COPY_XML, hDB, hKey, buffer, buffer_size, header);

(last argument was missing before).

Thanks for all the helpful hints. When finally managing to evade all timeouts and attach the debugger in just the right moment, we find that we get a segfault in mserver at L827:
   case RPC_DB_COPY_XML:
      status = db_copy_xml(CHNDLE(0), CHNDLE(1), CSTRING(2), CPINT(3), CBOOL(4));
Some printf debugging then pointed us to the fact that the culprit is the pointer de-referencing in CBOOL(4). This in turn can be traced back to mrpc.cxx L282 ff, where the line with the arrow was missing:
  {RPC_DB_COPY_XML, "db_copy_xml",
    {{TID_INT32, RPC_IN},
     {TID_INT32, RPC_IN},
     {TID_ARRAY, RPC_OUT | RPC_VARARRAY},
     {TID_INT32, RPC_IN | RPC_OUT},
 ->  {TID_BOOL, RPC_IN},
     {0}}},

If we put that in, the mserver process completes peacfully and we get a segfault in the client ("Wrong key type in XML file") which we will attempt to debug next. Shall I create a pull request for the additional RPC argument or will you just fix this on the fly?

> > Looks like a localisation issue. Your floats are formatted as "6,6584e+01", whereas the JSON decoder expects "6.6584e+01".
> 
> This should be fixed in the latest commit to the midas develop branch. The JSON specification requires a dot for the decimal separator, so we must ignore the user's locale when formatting floats/doubles for JSON.
> 
> I've tested the fix on my machine by manually changing the locale, and also added an automated test in the python directory.

Thanks very macth Ben,
so if I understand correctly we have to update MIDAS to latest develop branch available? can you sand me the link to be sure of install the right update. 
can you also tell me how you fix manually? we are restarting and then well be difficult install and makes updete.
thank you again, regards, Giovanni

> Looks like a localisation issue. Your floats are formatted as "6,6584e+01", whereas the JSON decoder expects "6.6584e+01".

This should be fixed in the latest commit to the midas develop branch. The JSON specification requires a dot for the decimal separator, so we must ignore the user's locale when formatting floats/doubles for JSON.

I've tested the fix on my machine by manually changing the locale, and also added an automated test in the python directory.

Looks like a localisation issue. Your floats are formatted as "6,6584e+01", whereas the JSON decoder expects "6.6584e+01".

Can you run the following few lines please? Then I'll be able to write a test using the same setup as you:


import locale
print(locale.getlocale())
from matplotlib import pyplot as plt
print(locale.getlocale())