 06 May 2009, Stefan Ritt, Forum, MIDAS mhttpd custom page questions 
|
> 1) I display the status of the run with <odb src="/Runinfo/State">, but it
> returns numbers which is not user friendly. How can I make something
> like "Running" with green background and "Stopped" with red background in the
|
|
06 May 2009, Stefan Ritt, Forum, MIDAS mhttpd custom page questions
|
> I have one more question. I use <odb src="odb field" edit=1> to display an
> editable ODB value, but how can I show this value in hexadecimal?
|
 15 Jun 2009, Jimmy Ngai, Forum, Time limit of each run
|
Dear All,
Can one set a time limit for each run? I can only find event limit in ODB.
|
|
24 Jun 2009, Razvan Stefan Gornea, Forum, Frontend and manual trigger question
|
Hi,
I have a question related to the frontend and I would need some suggestions
|
|
25 Jun 2009, Stefan Ritt, Forum, Frontend and manual trigger question
|
> I would like to add manual trigger capability and so I added the EQ_MANUAL_TRIG
> flag to the "CAEN" equipment type but the problem is that the framework calls
> directly the readout function on "Midas manual trigger". To trigger manually the
|
|
02 Jul 2009, Dawei Liu, Forum, Data taking hangs in the middle of run
|
Hi,
We are using midas to read ADC. It sometimes hung in the middle of data taking.
|
|
03 Jul 2009, Pierre-Andre Amaudruz, Forum, Data taking hangs in the middle of run
|
Hi Dawei,
Could you give more info on your setup:
|
|
06 Jul 2009, Dawei Liu, Forum, Data taking hangs in the middle of run
|
Hi Pierr-Andre,
|
|
08 Jul 2009, Konstantin Olchanski, Forum, jorway73a.c, Data taking hangs in the middle of run
|
> > Could you give more info on your setup:
> > - CAMAC controller model
> Jorway 73A, we have three in hand and the problem doesn't depend on which controller
|
|
18 Jul 2009, Exaos Lee, Forum, jorway73a.c, Data taking hangs in the middle of run
|
> > > Could you give more info on your setup:
> > > - CAMAC controller model
> > Jorway 73A, we have three in hand and the problem doesn't depend on which controller
|
|
03 Aug 2009, Exaos Lee, Forum, How to distinguish the status and value returned from "mvme_read_value(...)"
|
The definition of mvme_read_value is as the following:
[CODE]unsigned int EXPRT mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
|
|
03 Aug 2009, Stefan Ritt, Forum, How to distinguish the status and value returned from "mvme_read_value(...)"
|
[quote="Exaos Lee"]The definition of mvme_read_value is as the following:
[CODE]unsigned int EXPRT mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
|
|
03 Aug 2009, Konstantin Olchanski, Forum, How to distinguish the status and value returned from "mvme_read_value(...)"
|
> uint32_t mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
> Question: How to distinguish the status and value returned?
|
|
04 Aug 2009, Exaos Lee, Forum, VME-related codes contribution
|
Hi, all
I have some codes while using MIDAS. I upload them here. They are tested with
|
|
04 Aug 2009, Exaos Lee, Forum, Scripts to handle MIDAS sessions
|
Hi, all again
I have some scripts in "bash" and "Python" to handle MIDAS sessions. Please see the attached [url=elog:613/1]utils4midas.zip[/url]. I didn't write instructions |
|
04 Aug 2009, Exaos Lee, Forum, About python interface
|
Coding in Python is faster than in C (but running slower). So, some python interfaces are useful for testing purpose. I hope you may like the PyMVME module
for VME bus testing. |
|
04 Aug 2009, Exaos Lee, Forum, The contents of the attachment
|
As requested from K.O., I paste the "00README.txt" as the following:
[CODE]
#-*- mode: outline -*-
|
|
21 Aug 2009, Exaos Lee, Forum, Link error of "mcnaf"
|
The "utils/mcnaf.c" uses "camop()",
[code]
180: printf("camop\n");
|
|
21 Aug 2009, Konstantin Olchanski, Forum, Link error of "mcnaf"
|
> If you compile each source into an object, you may encounter a link error ...
Also camac rpc did not work at all last time we tried to use it at triumf, maybe 4 month ago in the Dragon
|
|
29 Aug 2009, Exaos Lee, Forum, At last, I'm here again!
|
I always got a 503 server error while I tried to connect this log book the latest
weeks. I don't know why. I hope it is not due to the network censorship because
of the coming National Day of China. Anyway, good luck to me when I want to paste
|